What hardtail frame?- Mtbr.com
Results 1 to 19 of 19
  1. #1

    Reputation:
    Join Date
    Feb 2004
    Posts
    8

    What hardtail frame?

    so heres the deal, i'm looking to a light hardtail frame to build up and race. in the last two seasons, i've def. become more of a roadie, but i want to get back to basics and my roots this seasons; i sold my superlight and want to built up a light weight race ready hardtail. what frames would you guys consider? keep in mind cost, i really dont want to go too crazy b.c. im also builiding a new roadie (think $3,000 built up and ready to ride, i work at a shop, so it will be less with e.p, but this is the retail range i am looking at). heres what i was thinking initially:

    Titus Riddler or HCR
    Giant XTC Hybrid
    Scott USA Scandium (would actually prefer the 2002/03 blue model is anyone has one for sale in the 18" range)
    Felt EPO Scandium
    Guru Ti Hardtail (new for 04; gurubikes.com)
    Anything else you may think of and add on

    Note: my shop carries trek, giant, santa cruz, guru (they now make a ti hardtail) as well as a couple of roadie brands (calfee, derosa) so any frame by either of those companies would be the best deal.

    thanks guys

  2. #2
    MaLóŒĒ*size=
    Reputation: MaLoL's Avatar
    Join Date
    Jan 2004
    Posts
    800
    kona kula primo frame

    easton scandium under 1200gr in 19" and cheap considering itīs scandium

  3. #3

    Reputation:
    Join Date
    Mar 2004
    Posts
    3
    If you can get a kona kula primo, let me know where. I tried to get on last week, but had no luck. The people at kona said they where sold out this year ( or at least the 18" were). I think I'm going to go with the Yeti Arc. Not a light or cheap as the kona, but still scandium.

  4. #4
    mtbr member
    Reputation:
    Join Date
    Jan 2004
    Posts
    242
    Gunnar rockhound

  5. #5
    mtbr member
    Reputation:
    Join Date
    Jan 2004
    Posts
    242

    Good job!

    Gunnar rockhound

  6. #6

    Reputation:
    Join Date
    Feb 2004
    Posts
    8
    ill check into it. i work for performance while im at college, and were also a kona dealer. maybe i can scare one up. it sounds like a cool frame and a good price. what do you guys think about independent? i can also e.p their frames, but they don't seem like the lightest; perhaps the 853 ride makes up for the weight. i suppose the jamis dragon is also an option at 2700.

  7. #7

    Reputation:
    Join Date
    Feb 2004
    Posts
    796
    Jas0n, can you even get the Felt EPO Scandium as a frame only and who sells them?

    Know anything about them besides them using Easton Scandium tubing? Price? Weight?

  8. #8
    MaLóŒĒ*size=
    Reputation: MaLoL's Avatar
    Join Date
    Jan 2004
    Posts
    800

    Listen!

    For those who donīt know it:

    All frames with Easton Scandium tubes donīt weight the same and donīt have the same stiffness. And this is not due to the price, itīs because of the design of the frame and the geometry.

  9. #9

    Reputation:
    Join Date
    Feb 2004
    Posts
    796
    I know that, I was just pointing out what tubing is used.

  10. #10

    Reputation:
    Join Date
    Feb 2004
    Posts
    8
    i've been working on the scandium, but its going to be hard. first of all, felt mtb's arent sold in the u.s., neither are they sold in the u.k. as for price, the highest end scandium (epo team) with the carbon monostay rear tri. goes for 4500 euro, which i think is like 5700 dollars; a little out of my price range but ill still do it if i can get my hands on one. as for the frame material, i know its their easton "ultra light xc series" scandium; it supposed to be very stiff but also very comfortable. our pearl rep. back home is also the felt rep, and i asked him if he might be able to pull some strings and import either the epo team or pro; he said he would try (were not a felt dealer, but we do order a ton of pearl and make him alot of money. hes been cool in the past with me, and i always get a few pairs of microsenors from him each season). so well see, thats all i know as far the frame goes. worst case: if i cant get the frame and i have my heart set on it, i may buy when im europe with the fam this summer nad bring it over (but that may be way too expensive with teh rising euro and falling dollar and depends on how much i can save until then).

  11. #11

    Reputation:
    Join Date
    Feb 2004
    Posts
    796
    yea ok, that's cool ...but you can only get it as a complete bike right?

  12. #12

    Reputation:
    Join Date
    Jan 2004
    Posts
    123

    Don't Forget Rocky Mountain

    They make a nice Scandium hardtail the vertex

  13. #13
    The Riddler
    Reputation: Kaparzo's Avatar
    Join Date
    Dec 2003
    Posts
    1,008

    Titus Riddler!!!!!!!!!

    It's 2.7 lbs, high quality aluminum, stiff, light, strong, absorbent (as much as al can be) and its a Titus, and a hardtail!!! What more could you want! Oh yeah, its 700bucks!!!!!!

  14. #14
    mtbr member
    Reputation: limba's Avatar
    Join Date
    Jan 2004
    Posts
    2,938
    I want a Rocky.They cost $1600 Canadian .Maybe I'll check out the Kona.

  15. #15
    mtbr member
    Reputation: limba's Avatar
    Join Date
    Jan 2004
    Posts
    2,938
    Well my lbs can't get one my size and Kona sent me an auto-reply email that is totally useless.

  16. #16
    I love Pisgah
    Reputation: Duckman's Avatar
    Join Date
    Jan 2004
    Posts
    3,406
    But what about the Giant hybrid? Anyone run one yet? I sure like the idea. Heres a good set of pics of the frameset.


    http://cgi.ebay.com/ws/eBayISAPI.dll...670851470&rd=1

  17. #17
    Burning Burner
    Reputation: skritikos's Avatar
    Join Date
    Jun 2004
    Posts
    91

    Kona Kula Primo, Fastrax Scandium?

    Quote Originally Posted by MaLóL
    kona kula primo frame

    easton scandium under 1200gr in 19" and cheap considering itīs scandium

    I visited today the local Kona dealer to ask for the Kula Primo frame.
    I liked the quality nice finish and the color. The only "problem" is that the stickers
    are "Kona Scandium Tubing", "Made in Taiwan" and the third one "Fastrax".

    So its not build from Easton tubing but from custom Kona ordered tubing?

    Thanks for any answers,

    Stamatis.

    ps: the price is 760 Euro paying cash.
    Last edited by skritikos; 06-10-2004 at 08:11 AM.

  18. #18
    hip boy
    Reputation: FuelForThought's Avatar
    Join Date
    Jan 2004
    Posts
    86
    Check http://v2racing.com/3dracing/roverxc.html.
    Not cheap but cutom geometry Scandium frame. That is what I would get if I were to get a hardtail.

    Max N.

  19. #19
    mtbr member
    Reputation:
    Join Date
    Jun 2004
    Posts
    22
    A little pricey, but what about an Extralite RC1 Ultra. 2.63 lb for a medium...

Similar Threads

  1. Anyone need a big boy steel hardtail frame - Straight up SPAM
    By 2farfwd in forum Clydesdales/Tall Riders
    Replies: 1
    Last Post: 03-28-2004, 08:17 PM
  2. Anyone have 2003 KHS Team Hardtail frame pics?
    By duder in forum General Discussion
    Replies: 3
    Last Post: 03-26-2004, 02:25 PM
  3. Brodie hardtail frame feedback needed
    By ET_QC in forum Downhill - Freeride
    Replies: 5
    Last Post: 03-07-2004, 12:38 PM
  4. Hardtail frame
    By Schecky in forum Where are the Best Deals?
    Replies: 8
    Last Post: 02-15-2004, 08:39 PM
  5. what size hardtail frame???
    By dan_bullit_man in forum Downhill - Freeride
    Replies: 5
    Last Post: 02-01-2004, 01:43 PM

Members who have read this thread: 0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

THE SITE

ABOUT MTBR

VISIT US AT

© Copyright 2020 VerticalScope Inc. All rights reserved.