Thread for Wanted Items for Vintage MTB Only - Page 2- Mtbr.com
Page 2 of 3 FirstFirst 123 LastLast
Results 201 to 400 of 409
  1. #201
    mtbr member
    Reputation:
    Join Date
    Oct 2012
    Posts
    63

    1991 Stumpjumper Comp Rigid Fork

    Newbie here. I came across a decent 1992 Stumpjumper Comp. It has a seized Answer Manitou Easton fork. Id like to swap it out for a rigid fork. Any tips on what to look for or what will work? I am an older guy and wont be charging hard. Just some light trail riding. I started the usual Ebay, CL search but cant find any Specialized Stumpjumper forks.
    Attached Thumbnails Attached Thumbnails Thread for Wanted Items for Vintage MTB Only-1024_1.jpg  


  2. #202
    sluice box
    Reputation: Co-opski's Avatar
    Join Date
    Oct 2013
    Posts
    987
    Have Gary Fisher DustTrax 26x2.2 gum wall NOS. If anyone is looking for a new shoe. Not sure of the year. In AK will ship to outside on your $ make offer.
    Thread for Wanted Items for Vintage MTB Only-20170626_191252.jpgThread for Wanted Items for Vintage MTB Only-20170626_191303.jpg

  3. #203
    Rubber Side Usually Down
    Reputation: Mr Crudley's Avatar
    Join Date
    Jan 2006
    Posts
    245
    Quote Originally Posted by bp101 View Post
    Newbie here. I came across a decent 1992 Stumpjumper Comp. It has a seized Answer Manitou Easton fork. Id like to swap it out for a rigid fork.
    The manitou 1 really suits it. Are you sure it is totally trashed now and can't be rebuilt? The original elastomers would be overdue for a replacement by now. It is one of the simplest mtb fork designs ever.

    suspensionforkparts.net might be able to help.


    Sent from my F5121 using Tapatalk
    ----------------------------------------------------
    'Geez, I wish I had a witty signature'

  4. #204
    mtbr member
    Reputation:
    Join Date
    Oct 2012
    Posts
    63
    [QUOTE=Mr Crudley;13229362]The manitou 1 really suits it. Are you sure it is totally trashed now and can't be rebuilt? The original elastomers would be overdue for a replacement by now. It is one of the simplest mtb fork designs ever.

    suspensionforkparts.net might be able to help.

    Not sure really. Not knowledgeable on shocks or mountain bikes for that matter. I just know it doesnt spring back and bike is unridable since the fork rubs on the tire.
    Thank you for the link - Ill check it out but still not sold on this fork though.

  5. #205
    Rubber Side Usually Down
    Reputation: Mr Crudley's Avatar
    Join Date
    Jan 2006
    Posts
    245
    Quote Originally Posted by bp101 View Post
    Not sure really. Not knowledgeable on shocks or mountain bikes for that matter. I just know it doesnt spring back and bike is unridable since the fork rubs on the tire. Thank you for the link - Ill check it out but still not sold on this fork though.
    It is a classic and one of the earliest ones that worked. It will take the edge off bumps but anywhere in the league of today's forks.I don't need another one but I'd take it off your hands you are going to throw it

    The earlier Manitou suspension are all one form of another of a shishkebab of squishy elastomers or MCU's and springs. No hydraulics to worry about.

    Sorry to pimp another forum, but it is for a good cause.
    The M1 manual is here.
    Answer Manitou Owners Manual | Technical & Manuals | Retrobike

    Here is a rebuild example.
    Manitou 1 fork rebuild with springs » bMHR

    Other handy threads.
    Manitou 1 Rebuild | Retrobike
    and
    Manitou 2 Coil/Elastomer FrankenFork Build Thread | Retrobike

    I would guess the elastomers you have in your Manitou 1's there have collapsed due to old age only.
    ----------------------------------------------------
    'Geez, I wish I had a witty signature'

  6. #206
    mtbr member
    Reputation:
    Join Date
    Oct 2012
    Posts
    63
    Quote Originally Posted by Mr Crudley View Post
    It is a classic and one of the earliest ones that worked. It will take the edge off bumps but anywhere in the league of today's forks.I don't need another one but I'd take it off your hands you are going to throw it

    The earlier Manitou suspension are all one form of another of a shishkebab of squishy elastomers or MCU's and springs. No hydraulics to worry about.

    Sorry to pimp another forum, but it is for a good cause.
    The M1 manual is here.
    Answer Manitou Owners Manual | Technical & Manuals | Retrobike

    Here is a rebuild example.
    Manitou 1 fork rebuild with springs » bMHR

    Other handy threads.
    Manitou 1 Rebuild | Retrobike
    and
    Manitou 2 Coil/Elastomer FrankenFork Build Thread | Retrobike

    I would guess the elastomers you have in your Manitou 1's there have collapsed due to old age only.
    Awesome! I will take a look at these links. You have my attention. Thanks man.

  7. #207
    Rubber Side Usually Down
    Reputation: Mr Crudley's Avatar
    Join Date
    Jan 2006
    Posts
    245
    Quote Originally Posted by bp101 View Post
    Awesome! I will take a look at these links. You have my attention. Thanks man.
    Worth the effort for your classic steed. Let me know if you need more details and I'll do my best to help out.

    Sent from my F5121 using Tapatalk
    ----------------------------------------------------
    'Geez, I wish I had a witty signature'

  8. #208
    mtbr member
    Reputation:
    Join Date
    Oct 2012
    Posts
    63
    Quote Originally Posted by Mr Crudley View Post
    Worth the effort for your classic steed. Let me know if you need more details and I'll do my best to help out.

    Sent from my F5121 using Tapatalk
    Thats really cool man. Thank you very much. Thats exactly what I was hoping to find by joining this forum.

  9. #209
    gkk
    gkk is offline
    mtbr member
    Reputation:
    Join Date
    Jun 2011
    Posts
    3
    Looking for a few parts to complete a restoration of my 1993 Monster Fat.

    M735 XT Brakes & levers (complete set) or
    M560 Levers only (no shifters or pod needed, have thumbies)
    Pedals of similar vintage

    Well-Used is fine, this bike has lots of "patina".

    thanks for any leads!

    /Greg

  10. #210
    mtbr member
    Reputation: laffeaux's Avatar
    Join Date
    Jan 2004
    Posts
    5,984
    Looking for a full set (front an drear) of black Paul Stoplight canti brakes. Anyone have a spare set they're looking to get rid of?
    Each bicycle owned exponentially increases the probability that none is working correctly.

  11. #211
    mtbr member
    Reputation:
    Join Date
    Jul 2008
    Posts
    115
    Looking for retro water bottle cages, especially with pink or blue tones. 1980's 1990's Zefal or Specialized would be most likely to work.

  12. #212
    mtbr member
    Reputation: StevieDT's Avatar
    Join Date
    Jun 2004
    Posts
    62

  13. #213
    mtbr member
    Reputation:
    Join Date
    Jul 2008
    Posts
    115
    StevieDT, how much do you want for two orange ones?

  14. #214
    mtbr member
    Reputation:
    Join Date
    Aug 2016
    Posts
    16
    Hey Guys,

    Looking for a nicer 27.0 seatpost with some layback. Ritchey branded nitto would be my ideal. Have some VRC items for trade or happy to discuss a fair price. Thanks!

  15. #215
    mtbr member
    Reputation: datasurfer's Avatar
    Join Date
    Nov 2006
    Posts
    323
    Quote Originally Posted by exlibris View Post
    Hey Guys,

    Looking for a nicer 27.0 seatpost with some layback. Ritchey branded nitto would be my ideal. Have some VRC items for trade or happy to discuss a fair price. Thanks!
    I think I might have one for you. Shoot me a PM re. what VRC parts you have in trade and I will shoot you some pics.

  16. #216
    rismtb
    Reputation:
    Join Date
    Dec 2012
    Posts
    552

    ritchey 27.0

    have this ritchey 27.0 not sure if its laid back enough. The black one
    Attached Thumbnails Attached Thumbnails Thread for Wanted Items for Vintage MTB Only-img_3309.jpg  


  17. #217
    mtbr member
    Reputation: caemis's Avatar
    Join Date
    Dec 2015
    Posts
    161
    Hi ALL,
    maybe kind of a long shot but I'd love to have a second singlespeed frame next to my Lobster. Is something out here?

    Specs: steel, 18"-20" (c-t) and at least 22.5" (c-c TT)

    Thanks so much!

    Link to Classifieds: WTD: Vintage Singlespeed Frame - Buy and Sell Mountain Bikes and Accessories

  18. #218
    mtbr member
    Reputation:
    Join Date
    Dec 2015
    Posts
    81
    Quote Originally Posted by bp101 View Post
    Awesome! I will take a look at these links. You have my attention. Thanks man.
    bp101, I just picked up a bike earlier this week with the Manitou shocks and have just got them apart to rebuild them. I found this manual online and it has helped.

    http://www.mtb-kataloge.de/Bikekatal...s/Manituo4.pdf

  19. #219
    mtbr member
    Reputation:
    Join Date
    Oct 2012
    Posts
    63
    Quote Originally Posted by rob_ralph View Post
    bp101, I just picked up a bike earlier this week with the Manitou shocks and have just got them apart to rebuild them. I found this manual online and it has helped.

    http://www.mtb-kataloge.de/Bikekatal...s/Manituo4.pdf
    Thanks for sending the link. Ill definitely take a look.

  20. #220
    mtbr member
    Reputation:
    Join Date
    Mar 2011
    Posts
    5
    Hi team,

    Chasing a dirt drop stem and RM-2 barsfor my Ritchey project.

    I'm based in Australia but happy to pay postage.

    Cheers

    Adrian the Aussie

  21. #221
    mtbr member
    Reputation:
    Join Date
    Apr 2010
    Posts
    57
    Seek a pair of Bullseye BB cups to complete a project. Any help would be greatly appreciated. Cheers and have a great Labor Day!

  22. #222
    mtbr member
    Reputation:
    Join Date
    Jun 2011
    Posts
    780
    Kinda newish, but looking for a rear swing arm for a 99 Mantra. Freebie because somehow the owner managed to destroy the BB shell.
    Seeking MB-2 Fork (19.3), Ritchey FD post silver 26.8

  23. #223
    mtbr member
    Reputation:
    Join Date
    Jun 2011
    Posts
    780
    Kinda newish, but looking for a rear swing arm for a 99 Mantra. Freebie because somehow the owner managed to destroy the BB shell.
    Seeking MB-2 Fork (19.3), Ritchey FD post silver 26.8

  24. #224
    mtbr member
    Reputation: iamkeith's Avatar
    Join Date
    Feb 2010
    Posts
    843
    Well, damn it! I cracked the top cup of a chris king no-logo headset.
    Thread for Wanted Items for Vintage MTB Only-king-crack.jpg
    Long shot, but I'm hoping someone has a matching cup or whole headset that they'd be willing to part with. Could probably be bottom or top since there's no logo, and it doesn't necessarily need bearings. If all else fails, I'd consider a logo cup I suppose. Silver, 1". Thanks!
    We still hang bike thieves in Wyoming [Pedal House]

  25. #225
    artistic...
    Reputation: colker1's Avatar
    Join Date
    Jan 2004
    Posts
    7,574
    Looking for a vicious cycles fork 11/8, 425mm(or any other high quality fork w/ same specs). Could trade for a fat chance wicked fork(purple, exc condition), syncros 26.4 seatpost, silver kore elite 135mm 0 degr. ahead stem, silver control tech 1in ahead stem and titec 100 carbon bar ends.
    Also looking for 2 pairs of 26" 2.2/ 2.1 xc tires. Nanoraptors would be excellent.
    Last edited by colker1; 09-10-2017 at 06:20 PM.
    WTB: Bomber Z2 1 1/8 steerer, in good to excellent shape OR bomber rebuild kit.

  26. #226
    Obi
    Obi is offline
    -_-
    Reputation:
    Join Date
    Oct 2005
    Posts
    4,748
    Quote Originally Posted by iamkeith View Post
    Well, damn it! I cracked the top cup of a chris king no-logo headset.
    If you can't find one call CK up and ask if they can help you out. They've been known to work the occasional miracle.

  27. #227
    mtbr member
    Reputation:
    Join Date
    Apr 2016
    Posts
    432
    I picked up an old Fat Chance frame (1988 i believe) but am missing the fork. I Would like to buy one, unicrown from a 1986-1990ish Fat. Color doesn't matter but yellow is what I need and it's for a large size frame. 1" threaded

    Sent from my SM-N920V using Tapatalk

  28. #228
    Ambivalent Luddite
    Reputation: Retro Dude's Avatar
    Join Date
    Jun 2010
    Posts
    290
    Nice pick up, what's the serial number? It will tell you what year it is.
    __________________

    inFATuated

  29. #229
    mtbr member
    Reputation:
    Join Date
    Apr 2016
    Posts
    432
    Quote Originally Posted by Retro Dude View Post
    Nice pick up, what's the serial number? It will tell you what year it is.
    B01148F

    It's an odd serial number. 88 Fat Chance catalog shows it as a U brake frame but mine is Canti brake, an old Fat employee told me some were special ordered that way but that's all I really know.

    Has Suntour dropouts, press fit BB, 1" head

    Sent from my SM-N920V using Tapatalk

  30. #230
    Ambivalent Luddite
    Reputation: Retro Dude's Avatar
    Join Date
    Jun 2010
    Posts
    290
    It's an '88, the 114th built that year, not sure about the "B", I've seen that in a few serial numbers. The '88 catalog has '87 bikes in the pics, the only year U-brakes were standard.

    It takes a fork with 2" of rake to go with it's 69deg head tube angle.
    __________________

    inFATuated

  31. #231
    mtbr member
    Reputation:
    Join Date
    Apr 2016
    Posts
    432
    I've run into a small issue with the 88 Fat Chance and need either a silver Chris King 2nut top (have cups and crown race) so I can run a brake hanger in the stack, or I need a stem with a roller cam or built in hanger and then cut my steerer down to fit (not the ideal choice).

    So, does anyone have a 1" CK 2nut laying around they'd sell or trade? I have the GripNut i could trade, 3dv top cap and a few other CK bits laying around to swap as well as a Salsa stem if I go that route. Still on the lookout for a Fat Chance fork but the one I painted will do for now.

    Sent from my SM-N920V using Tapatalk

  32. #232
    artistic...
    Reputation: colker1's Avatar
    Join Date
    Jan 2004
    Posts
    7,574
    Quote Originally Posted by dubya3 View Post
    I've run into a small issue with the 88 Fat Chance and need either a silver Chris King 2nut top (have cups and crown race) so I can run a brake hanger in the stack, or I need a stem with a roller cam or built in hanger and then cut my steerer down to fit (not the ideal choice).

    So, does anyone have a 1" CK 2nut laying around they'd sell or trade? I have the GripNut i could trade, 3dv top cap and a few other CK bits laying around to swap as well as a Salsa stem if I go that route. Still on the lookout for a Fat Chance fork but the one I painted will do for now.

    Sent from my SM-N920V using Tapatalk
    Just put a steel Tange headset there..
    WTB: Bomber Z2 1 1/8 steerer, in good to excellent shape OR bomber rebuild kit.

  33. #233
    mtbr member
    Reputation: caemis's Avatar
    Join Date
    Dec 2015
    Posts
    161
    Hi,
    also the frame is not particular vintage it needs a decent fork: 1 1/8, steel, threadless and at least 20cm steerer, 41cm AC +/- 1.5cm ...

    Thats the frame:


    (Matt Chester Utiitiman)

    Thanks!
    Last edited by caemis; 10-12-2017 at 01:10 PM.

  34. #234
    mtbr member
    Reputation:
    Join Date
    Apr 2011
    Posts
    187
    Looking for an 18" WTB Phoenix Titanium frame. Any help is much appreciated.

  35. #235
    mtbr member
    Reputation:
    Join Date
    Aug 2014
    Posts
    18
    I'm looking for a 22.2 Ritchey quill stem in black just like the one posted earlier if anyone else has one. Preferably 130+

  36. #236
    mtbr member
    Reputation: tductape's Avatar
    Join Date
    Mar 2008
    Posts
    2,401
    Quote Originally Posted by drew54 View Post
    I'm looking for a 22.2 Ritchey quill stem in black just like the one posted earlier if anyone else has one. Preferably 130+
    PM me. I think I have a Ritchey force stem or two.
    Seek: Koski Trailmaster. Breezer Series 2 or 3. Cunningham Racer.

  37. #237
    rismtb
    Reputation:
    Join Date
    Dec 2012
    Posts
    552
    is the 26.4mm Syncros post for sale? is it blk? I need one for a project started in 2008

  38. #238
    mtbr member
    Reputation:
    Join Date
    Aug 2014
    Posts
    18
    I am looking for a set of Deore XT thumb shifters.

    I have a set of Deore DX ST-M071 brake lever shifter combos that I'd be willing to trade. PM me for a picture.

  39. #239
    mtbr member
    Reputation: Feldybikes's Avatar
    Join Date
    Feb 2004
    Posts
    899
    I have DX thumbshifters. Not looking for that brake lever/shifter in trade, though.

  40. #240
    mtbr member
    Reputation:
    Join Date
    Apr 2016
    Posts
    432
    I need a single Mavic M231 rim (32h) for a frame that's been a slow build. Doesn't need to be super nice, just rideable

    Sent from my SM-N920V using Tapatalk

  41. #241
    artistic...
    Reputation: colker1's Avatar
    Join Date
    Jan 2004
    Posts
    7,574
    I would like a suntour xc pro headset. A shimano 600 would do.
    WTB: Bomber Z2 1 1/8 steerer, in good to excellent shape OR bomber rebuild kit.

  42. #242
    This place needs an enema
    Reputation: mikesee's Avatar
    Join Date
    Aug 2003
    Posts
    15,068
    Have: One wheel worth of Paul Crosstops. They work great.

    Want: Really only in need of newer WTB Vigo saddles.

    Contact: mike dot curiak at gmail dot com

    Thanks.
    Attached Thumbnails Attached Thumbnails Thread for Wanted Items for Vintage MTB Only-img_0606.jpg  


  43. #243
    mtbr member
    Reputation:
    Join Date
    Apr 2011
    Posts
    187
    Looking for a set of WTB Classic Grease Guard Hubs in Gunmetal Grey.

    Have a very little ridden silver WTB wheelset (140 rear hub) as a trade option.

    Thanks

    Moritz

  44. #244
    mtbr member
    Reputation: laffeaux's Avatar
    Join Date
    Jan 2004
    Posts
    5,984

    early Ritchey Vantage rim

    I'm looking for a rim that matches the one pictured below. It's a 1989(ish) Ritchey Vantage rim - 32h, dark anodized. I need either a lone rim in good shape, or a complete rear wheel built to a Shimano XT m-732 hub. Either option, looking for a rim that is in good condition.

    Also, (last option) if you have a nice complete wheelset with these rims in silver I might be interested in that.
    Attached Thumbnails Attached Thumbnails Thread for Wanted Items for Vintage MTB Only-20171121_111718.jpg  

    Each bicycle owned exponentially increases the probability that none is working correctly.

  45. #245
    rismtb
    Reputation:
    Join Date
    Dec 2012
    Posts
    552
    have these although they are silver
    Attached Thumbnails Attached Thumbnails Thread for Wanted Items for Vintage MTB Only-img_3010.jpg  

    Thread for Wanted Items for Vintage MTB Only-img_3011.jpg  


  46. #246
    artistic...
    Reputation: colker1's Avatar
    Join Date
    Jan 2004
    Posts
    7,574
    Need a 1" shimano crown race and the upper race that goes inside the head tube. I have a 105 headset which is JIS and i need ISO standard parts.
    I believe those races must be interchangeable between their headsets.
    Thanks.
    WTB: Bomber Z2 1 1/8 steerer, in good to excellent shape OR bomber rebuild kit.

  47. #247
    No known cure
    Reputation: Vader's Avatar
    Join Date
    Feb 2004
    Posts
    3,789
    Quote Originally Posted by laffeaux View Post
    I'm looking for a rim that matches the one pictured below. It's a 1989(ish) Ritchey Vantage rim - 32h, dark anodized. I need either a lone rim in good shape, or a complete rear wheel built to a Shimano XT m-732 hub. Either option, looking for a rim that is in good condition.

    Also, (last option) if you have a nice complete wheelset with these rims in silver I might be interested in that.
    I have a Vantage Comp in grey and a Vantage Sport in silver. Different decals though.
    Ripping trails and tipping ales

  48. #248
    mtbr member
    Reputation: Vmontyy's Avatar
    Join Date
    Nov 2017
    Posts
    3
    Quote Originally Posted by dubya3 View Post
    I need a single Mavic M231 rim (32h) for a frame that's been a slow build. Doesn't need to be super nice, just rideable


    Sent from my SM-N920V using Tapatalk





    Still looking? I have one for you. $5 plus actual shipping cost.

  49. #249
    mtbr member
    Reputation: laffeaux's Avatar
    Join Date
    Jan 2004
    Posts
    5,984
    Quote Originally Posted by Vader View Post
    I have a Vantage Comp in grey and a Vantage Sport in silver. Different decals though.
    Thanks. I'm trying to match the decals. These were used in the late 80s and possibly 1990. After that they changed several times. My frame is from, `89, so I'd like to stick with the early decals.

  50. #250
    No known cure
    Reputation: Vader's Avatar
    Join Date
    Feb 2004
    Posts
    3,789
    Quote Originally Posted by laffeaux View Post
    Thanks. I'm trying to match the decals. These were used in the late 80s and possibly 1990. After that they changed several times. My frame is from, `89, so I'd like to stick with the early decals.
    I figured but thought I'd throw them out there.
    Ripping trails and tipping ales

  51. #251
    mtbr member
    Reputation:
    Join Date
    Apr 2016
    Posts
    432
    Quote Originally Posted by Vmontyy View Post
    Still looking? I have one for you. $5 plus actual shipping cost.
    Yes, that'd be most Awesome! Are you in the states?

    Sent from my SM-N920V using Tapatalk

  52. #252
    mtbr member
    Reputation: irideiam's Avatar
    Join Date
    Dec 2011
    Posts
    174

    Looking for 27.0 Seat Post and B72

    Looking for an old school 27.0 seatpost like this that has some good adjustably. Also, looking for a Brooks B72 with patina that is decent shape leather wise, lots of the ones with patina on eBay are cracking and overpriced....


    Name:  s-l225.jpg
Views: 1388
Size:  9.9 KB
    "I ride I am"

  53. #253
    mtbr member
    Reputation:
    Join Date
    Jul 2010
    Posts
    718
    Syncros made an aluminum 27.0 post. Good luck!

  54. #254
    mtbr member
    Reputation: Powerglider's Avatar
    Join Date
    Dec 2017
    Posts
    5

    Cartridge Bearing Rear Hub Cone

    Searching for x2) hub cones for (Sansin/Specialized Suntour XC Pro) rear hub. Used to carry the 6001 bearing 12 ID on a 10mm rear axle. I have a set of Mavic Paris Gau Dakar hubs I would like to change from 126 O.L.D. to 130/135 O.L.D. and get some use out of. The Mavic replacement axles are vapor. I can spacer it out and re-dish it to make it work with two of these magic cones if you are sitting on trashed wheel or hubs.
    Attached Thumbnails Attached Thumbnails Thread for Wanted Items for Vintage MTB Only-2017-12-17-13.55.19.jpg  

    Thread for Wanted Items for Vintage MTB Only-2017-12-17-13.54.21.jpg  


  55. #255
    Humanoid Lobster
    Reputation: Jak0zilla's Avatar
    Join Date
    May 2010
    Posts
    672

    1" stem with ~130mm x 15deg rise?

    Hi all - I'm (still) looking for a nice 1"/22.2mm quill stem, black, and 15-20 degree rise, in 120-140mm reach. Ideally with a cable hanger/guide/pulley.

    I have a Ritchey Force, but am using another of the same stem on a different build. I want to replace a Klein Mission Control (135mm, 17deg) An "F" or "K" series Salsa would be great, or a Syncros.

    I've got other stems for trade, and other stuff as well. Or cash.

    Thx!
    Attached Thumbnails Attached Thumbnails Thread for Wanted Items for Vintage MTB Only-20141006_093333.jpg  

    Thread for Wanted Items for Vintage MTB Only-20150524_170127.jpg  

    Don't call it a gooseneck.

  56. #256
    mtbr member
    Reputation:
    Join Date
    Jan 2004
    Posts
    76
    Quote Originally Posted by Powerglider View Post
    I have a set of Mavic Paris Gau Dakar hubs I would like to change from 126 O.L.D. to 130/135 O.L.D. and get some use out of. The Mavic replacement axles are vapor. I can spacer it out and re-dish it to make it work with two of these magic cones if you are sitting on trashed wheel or hubs.
    I have lot's of these axles for converting Mavic 501/531/ParisGaoDakar hubs into 135mm. I live in Germany but they fit in an envelope and can be sent as a registered letter. PM me if interested.


    Thread for Wanted Items for Vintage MTB Only-screenshot-2017-12-19-vintagebikes-laufr%E4der.jpg

  57. #257
    mtbr member
    Reputation:
    Join Date
    Aug 2014
    Posts
    18
    I'd be interested if anyone has a black 26" WTB Laserbeam rim? I'm looking for a 32 hole.

  58. #258
    mtbr member
    Reputation:
    Join Date
    Jun 2012
    Posts
    135
    I just picked up a second set of the old englund air cartridges with a judy, and I seek the tool that came with them originally, I know its a longshot but it does not hurt to ask

    thanks

  59. #259
    mtbr member
    Reputation:
    Join Date
    Mar 2011
    Posts
    5
    Hi Team,

    Thought Id put it out there....

    Im chasing a Matt Chester or similar single speed MTB or MonsterCrosser.

    Happy to consider 26in or 29?

    17-19in is my workable range

    Cheers

    Adrian the Aussie

  60. #260
    mtbr member
    Reputation: StevieDT's Avatar
    Join Date
    Jun 2004
    Posts
    62
    I have an older Titec post in 27.0. looks like this but black.
    https://www.sterba-bike.cz/media/pro...-mtb-286-3.jpg

  61. #261
    mtbr member
    Reputation: burritoguru's Avatar
    Join Date
    Aug 2008
    Posts
    127

    Looking for a Paul Barrel Adjuster

    Looking for a Paul round silver barrel adjuster
    Looking for a P7, k14 or f12 1inch

  62. #262
    Glass Breaker
    Reputation:
    Join Date
    Aug 2005
    Posts
    131
    Looking for a quality rigid fork for a 20" Nebula Green Klein Fervor; so I need 1" threaded, 155 mm / 6" length, 400ish axle to crown, preferably not chrome.

    Thank you.

  63. #263
    mtbr member
    Reputation:
    Join Date
    May 2014
    Posts
    222
    I'm looking for a stem to properly fit some dirt drops on my Hakkalugi.

    1" quill (22.2)
    26.0 bar clamp (25.4 if it's thick stock that I can ream out)
    110-120mm length
    30-35 degree rise

    Cash or trade. My parts bins are overflowing.

  64. #264
    rismtb
    Reputation:
    Join Date
    Dec 2012
    Posts
    552
    vancouver CL
    Attached Images Attached Images  

  65. #265
    mtbr member
    Reputation: laffeaux's Avatar
    Join Date
    Jan 2004
    Posts
    5,984
    Quote Originally Posted by LeeDumler View Post
    I'm looking for a stem to properly fit some dirt drops on my Hakkalugi.

    1" quill (22.2)
    26.0 bar clamp (25.4 if it's thick stock that I can ream out)
    110-120mm length
    30-35 degree rise

    Cash or trade. My parts bins are overflowing.
    Finding a 26.0 quill stem with that much rise will be pretty challenging. You may have a lot more luck finding a 25.4 mm drop bar and using a mountain bike stem.
    Each bicycle owned exponentially increases the probability that none is working correctly.

  66. #266
    mtbr member
    Reputation: Feldybikes's Avatar
    Join Date
    Feb 2004
    Posts
    899
    Jak0zilla,

    This is kinda/sorta what you were asking for. Syncros stem. 25.4 bore. 120mm length. But 0 deg rise. There is some room in the quill to move it up.

    Thread for Wanted Items for Vintage MTB Only-img_7434.jpg

    Powerglider,

    I have this XC Pro hub and 7 speed freewheel. 135mm spacing. Could that be what you're looking for?

    Thread for Wanted Items for Vintage MTB Only-img_7432.jpg

    Anyone,

    While looking for that syncs stem, I found this old Salsa one, too. 140-145mm, Looks to be -17deg. A little rusty. Pretty sure it's for 26.0.

    Thread for Wanted Items for Vintage MTB Only-img_7435.jpg

  67. #267
    Humanoid Lobster
    Reputation: Jak0zilla's Avatar
    Join Date
    May 2010
    Posts
    672
    You might want to look for a Specialized "MTB-3" stem (made by Nitto), they turn up often on ebay and match those specs. I run one with exactly those specs on my commuter.

    Pricey, but as an example -

    https://www.ebay.com/itm/Specialized...S/272335213661

    Quote Originally Posted by LeeDumler View Post
    I'm looking for a stem to properly fit some dirt drops on my Hakkalugi.

    1" quill (22.2)
    26.0 bar clamp (25.4 if it's thick stock that I can ream out)
    110-120mm length
    30-35 degree rise

    Cash or trade. My parts bins are overflowing.
    Don't call it a gooseneck.

  68. #268
    Humanoid Lobster
    Reputation: Jak0zilla's Avatar
    Join Date
    May 2010
    Posts
    672
    Thanks Feldybikes! I appreciate you looking, but I need something with rise. Add a cable hanger and 10-15 degrees of rise and it would be awesome.

    I'm trying to replace a 135mm Klein Mission Control with a hanger and 17 degree rise in order to run a wider bar. (The Mission Control is in great shape and is definitely on the table for a trade.)

    Again - thank you so much for looking out! I do appreciate it!

    Quote Originally Posted by Feldybikes View Post
    Jak0zilla,

    This is kinda/sorta what you were asking for. Syncros stem. 25.4 bore. 120mm length. But 0 deg rise. There is some room in the quill to move it up.
    Don't call it a gooseneck.

  69. #269
    mtbr member
    Reputation:
    Join Date
    May 2014
    Posts
    222
    Quote Originally Posted by Jak0zilla View Post
    You might want to look for a Specialized "MTB-3" stem (made by Nitto), they turn up often on ebay and match those specs. I run one with exactly those specs on my commuter.
    Thanks for the suggestion. None of my friends had a 110 x 35 stem, but as soon as I asked for a "specialized riser stem" the search started to yield results.

  70. #270
    mtbr member
    Reputation: Williwoods's Avatar
    Join Date
    May 2004
    Posts
    1,012
    Wanted:

    Salsa black quill stem, 135mm 10 degree rise, 1 inch
    7 speed shimano freewheel 12-28 600/DA or even Sachs etc..
    28 Hole Shimano 640/740 or 730 XT Front hub
    Flat light handlebar with 7 or 10 degree sweep
    Endless Band 28.6 XT front derailleur
    3xStep Down Ferrules (Yeti style)
    Suntour XC Pro Cranks
    Suntour XC Pro Brakes
    Suntour XC Pro GG headset 1
    Suntour XC Pro 28.6 bottom pull front derailleur
    GG BB inner seal or complete BB
    Salsa silver/raw quill stem 120/130mm 15 degree rise. 1inch.
    American Classic QR or ? for 100/135mm
    M900 seatpost 26.8mm
    M900 175mm Cranks/BB
    M900 brake pads
    M900 1" headset

    I have a few Steelman brazed frames both in Road and MTB for trade or also many NOS Campagnolo Euclid/Centaur/Olympus MTB and Chorus/Record Road parts for trade. I also have a few random Ritchey MTB/Road frames too.

  71. #271
    mtbr member
    Reputation: Feldybikes's Avatar
    Join Date
    Feb 2004
    Posts
    899
    Quote Originally Posted by Williwoods View Post
    7 speed shimano freewheel 12-28 600/DA or even Sachs etc..
    see my post a couple up from here.

    Flat light handlebar with 7 or 10 degree sweep
    I think I have a Bontrager handlebar that fits this description. Not sure it qualifies as VRC but at least it's 25.4!

    Endless Band 28.6 XT front derailleur
    Not only do I not have one, but I had to look this one up! Never heard of Endless Band before. Maybe no one else finds that interesting but me.

    American Classic QR or ? for 100/135mm
    No AC, but I've got your "?" covered potentially. Like M900.

    M900 175mm Cranks/BB
    yes cranks. Maybe on the BB. If I don't have a UN9X, I'm pretty sure I have at least a UN7X.

    email me feldybikes at the geemail if you would like to work something out.

  72. #272
    mtbr member
    Reputation:
    Join Date
    Jan 2018
    Posts
    3
    I am looking for a set of IRD u-brakes or Rotary brakes. Does anyone have a set or know of someone that might have a set for sale?

  73. #273
    Ambivalent Luddite
    Reputation: Retro Dude's Avatar
    Join Date
    Jun 2010
    Posts
    290
    Looking for a Strong seatpost, 26.4 diameter. '86 / '87 / '88 vintage for an '87 Fat Chance.

    Condition not critical, prefer some patina.

    Thanks

  74. #274
    mtbr member
    Reputation:
    Join Date
    Aug 2014
    Posts
    18
    I'm looking for some vintage 26 inch 32 hole rims to build up on a set of DX or LX hubs.

    I have a Sun TL18 that is kind of pewter in color. If I could find a 2nd that'd be great.

    Pretty much interested in any pairs someone has laying around that they don't intend to use.

    Thanks.

  75. #275
    mtbr member
    Reputation:
    Join Date
    Aug 2014
    Posts
    18
    Quote Originally Posted by agentorangemen View Post
    Looking for a quality rigid fork for a 20" Nebula Green Klein Fervor; so I need 1" threaded, 155 mm / 6" length, 400ish axle to crown, preferably not chrome.

    Thank you.
    I have a 6.5 inch steering tube crmo Tange fork that looks like this. Axle to crown is about 15.5 inches.
    I might have to pm image
    https://i.ebayimg.com/images/g/azIAA...IlT/s-l400.jpg

  76. #276
    mtbr member
    Reputation:
    Join Date
    Jun 2012
    Posts
    135
    1991 Stumpjumper Comp Rigid Fork



    Newbie here. I came across a decent 1992 Stumpjumper Comp. It has a seized Answer Manitou Easton fork. Id like to swap it out for a rigid fork. Any tips on what to look for or what will work? I am an older guy and wont be charging hard. Just some light trail riding. I started the usual Ebay, CL search but cant find any Specialized Stumpjumper forks.
    Look on facebbook for vintage mtb sites
    You can probably something there if it doesn't have to be specialized but someobe may have something laying around you never know
    You have a threaded steerer, probably 1 so measure from fork crown to top nut for steerer length
    Last edited by stingray230sx; 02-02-2018 at 08:10 PM.

  77. #277
    mtbr member
    Reputation: Hurricane Jeff's Avatar
    Join Date
    Jan 2006
    Posts
    2,691
    I have a nice set of Bontrager made, rolled down Mavic MA40's laced to Dura-Ace hubs that I had built back in early 1987, that I'm thinking of letting go. I was looking for a project bike to use them on. Let me know if anyone is interested. The front hub is missing the axle and rear hub has a Dura-Ace 11-28 7 spd cassette.
    I will post a picture soon.
    Attached Thumbnails Attached Thumbnails Thread for Wanted Items for Vintage MTB Only-img_0136.jpg  

    Thread for Wanted Items for Vintage MTB Only-img_0137.jpg  

    Thread for Wanted Items for Vintage MTB Only-img_0138.jpg  

    Thread for Wanted Items for Vintage MTB Only-img_0139.jpg  

    Thread for Wanted Items for Vintage MTB Only-img_0140.jpg  

    Last edited by Hurricane Jeff; 02-06-2018 at 10:04 PM.
    EXODUX Jeff

  78. #278
    mtbr member
    Reputation:
    Join Date
    Mar 2011
    Posts
    5
    Ready for the stupidest wanted ever.

    Wanted to buy

    Cunningham Mini-cam x 2 like below...

    170189697_1778faebaa_m by Dubrat, on Flickr


    For a project I am embarking on with Mr Potts

  79. #279
    mtbr member
    Reputation:
    Join Date
    Jan 2017
    Posts
    50
    I wouldn't call that stupid, It might be irrational/delusional. Mr Potts may have an idea how many were made. Just out of curiosity could you get away ubrakes/suntour rollers/paul racer post mounts with that setup, or are the cunningham's the only possible solution?I'm just wondering,so no need to respond, unless you have time to share your knowledge.
    good luck

  80. #280
    mtbr member
    Reputation:
    Join Date
    Jan 2018
    Posts
    3
    All U-brakes and roller cams are interchangable, same brake bosses

  81. #281
    mtbr member
    Reputation:
    Join Date
    Jan 2017
    Posts
    50
    good to know, If you need a 3x6 front and rear derailleurs (+?) let me know I have some things I don't really need. PM me

  82. #282
    mtbr member
    Reputation: Williwoods's Avatar
    Join Date
    May 2004
    Posts
    1,012
    Gonna be a long shot but

    Looking for a 15" WTB Phoenix SE

  83. #283
    boardguru
    Reputation:
    Join Date
    Oct 2009
    Posts
    216
    Looking for black Mafac motorcycle mechanical brake levers that came on 1980/81 Ritchey Mt. McKinley.
    Thanks

  84. #284
    mtbr member
    Reputation: laffeaux's Avatar
    Join Date
    Jan 2004
    Posts
    5,984
    Quote Originally Posted by boardguru View Post
    Looking for black Mafac motorcycle mechanical brake levers that came on 1980/81 Ritchey Mt. McKinley.
    Thanks
    Probably mean Magura?
    Each bicycle owned exponentially increases the probability that none is working correctly.

  85. #285
    boardguru
    Reputation:
    Join Date
    Oct 2009
    Posts
    216
    Nope, definitely Mafac. Magura wasn't even into mountain biking back then.

  86. #286
    mtbr member
    Reputation: Hurricane Jeff's Avatar
    Join Date
    Jan 2006
    Posts
    2,691
    Back in 1980/81, no component manufacturers were into mountain biking. The few frame makers that existed were using touring components. As for the Mafac levers, I'm unfamiliar with those, however l do have a set( in use) of the Magura levers, which were actually motorcycle levers
    EXODUX Jeff

  87. #287
    boardguru
    Reputation:
    Join Date
    Oct 2009
    Posts
    216
    You are absolutely correct about manufacturers of bike components. The Mafac's were mechanical motorcycle brake levers. And the components were touring parts. I still have the cantilever brake just not the levers. As one of mine broke from a crash and were replaced by Suntour levers. Just rying to find these brake levers to make the bike OEM again.

  88. #288
    mtbr member
    Reputation:
    Join Date
    Jan 2017
    Posts
    50
    Have you tried ebay france? moto levier de freins mafac is a guess. try different spelling variations, mafac ancienne might work too, good luck. I just got a book yesterday bicycle design by hadland and lessing, flipping through it there was a picture of a 1983 29er, so those apparently are actually old school.

  89. #289
    mtbr member
    Reputation:
    Join Date
    Apr 2010
    Posts
    57
    Looking for a 1 1/4" CK threadless headset in turquoise. Any help out there? Thanks!

  90. #290
    mtbr member
    Reputation:
    Join Date
    Apr 2010
    Posts
    57
    Looking for some Cook Bros E Cranks in turquoise. Thanks!

  91. #291
    mtbr member
    Reputation: caemis's Avatar
    Join Date
    Dec 2015
    Posts
    161
    Hi there,
    I am after a full set of PAUL Motolites (Vbrakes) in silver or black or something else...
    Thanks!

  92. #292
    mtbr member
    Reputation:
    Join Date
    Jan 2004
    Posts
    1,827
    Yo!

    Check your parts bins for: (See pics)

    Suntour MP1000 pedals

    Suntour XC Compe pedals

    Need 9/16" thread diameter. Any colors would be considered

    All Covered
    Attached Thumbnails Attached Thumbnails Thread for Wanted Items for Vintage MTB Only-mp1000.jpg  

    Thread for Wanted Items for Vintage MTB Only-suntour-xc-compe.jpeg  

    Last edited by eshew; 09-25-2018 at 01:32 PM.

  93. #293
    mtbr member
    Reputation:
    Join Date
    Jun 2014
    Posts
    1
    Quote Originally Posted by boardguru View Post
    You are absolutely correct about manufacturers of bike components. The Mafac's were mechanical motorcycle brake levers. And the components were touring parts. I still have the cantilever brake just not the levers. As one of mine broke from a crash and were replaced by Suntour levers. Just rying to find these brake levers to make the bike OEM again.
    My '82 ritchey and all others I've seen have had magura or tomaselli moto levers, and magura was spec for this era if you consult catalogs at https://ritchey.vintagebicycledatabase.com/catalogs.php.

  94. #294
    mtbr member
    Reputation:
    Join Date
    Jan 2018
    Posts
    3
    Also looking for a set of Magura Moto levers for my 88 Wicked Fat.

  95. #295
    mtbr member
    Reputation: Blackies Pasture's Avatar
    Join Date
    Mar 2015
    Posts
    499
    Looking for Shwinn, Uniroyal or Carlisle "tractor" tires, 26x2.125 for Trailmaster. Have very early Specialized S-works race tires for trade or trade plus cash.
    Attached Thumbnails Attached Thumbnails Thread for Wanted Items for Vintage MTB Only-carlisle-tractor.jpg  


  96. #296
    mtbr member
    Reputation:
    Join Date
    Jun 2011
    Posts
    538
    In search of fillet brazed 1 quill stems or fillet brazed clamp on stems.
    Willing to trade for parts or greenbacks

  97. #297
    mtbr member
    Reputation:
    Join Date
    Mar 2018
    Posts
    1

    Sorted

    Sorted, thanks!
    Last edited by somethingyoufeel; 04-14-2018 at 02:23 AM.

  98. #298
    mtbr member
    Reputation: mainlyfats's Avatar
    Join Date
    Oct 2005
    Posts
    1,206
    Quote Originally Posted by dubrat View Post
    Ready for the stupidest wanted ever.

    Wanted to buy

    Cunningham Mini-cam x 2 like below...

    170189697_1778faebaa_m by Dubrat, on Flickr


    For a project I am embarking on with Mr Potts
    I haven't seen them typed about on here, but have heard about a German machinist who has done at least one production run of very, very close repros. retrobike might have some leads and failing that, Monkey Wrench Cycles may be able to help with contact.

  99. #299
    mtbr member
    Reputation: caemis's Avatar
    Join Date
    Dec 2015
    Posts
    161
    Hi there,
    I am looking for a decent (i.e. fillet brazed) fork: 1" threaded with around 23cm(!) steerer. Everything else is not that important... Thanks a lot!

  100. #300
    Bikes in jeans
    Reputation: jestep's Avatar
    Join Date
    Jul 2004
    Posts
    2,254
    Quote Originally Posted by caemis View Post
    Hi there,
    I am looking for a decent (i.e. fillet brazed) fork: 1" threaded with around 23cm(!) steerer. Everything else is not that important... Thanks a lot!
    Unless you get really lucky, you're practically in unobtainium territory.

    Products - Winter Bicycles

    forks — bantam bicycle works
    WTB: Med Bontrager Ti Lite, PM Me...

  101. #301
    mtbr member
    Reputation: laffeaux's Avatar
    Join Date
    Jan 2004
    Posts
    5,984
    Quote Originally Posted by caemis View Post
    Hi there,
    I am looking for a decent (i.e. fillet brazed) fork: 1" threaded with around 23cm(!) steerer. Everything else is not that important... Thanks a lot!
    Threaded or threadless?

    I have a 1" fork with a super long threaded steerer, but it's a mid to lower end. Looks fine, but it's heavy, and it's TIG welded.
    Each bicycle owned exponentially increases the probability that none is working correctly.

  102. #302
    mtbr member
    Reputation: caemis's Avatar
    Join Date
    Dec 2015
    Posts
    161
    Quote Originally Posted by laffeaux View Post
    Threaded or threadless?

    I have a 1" fork with a super long threaded steerer, but it's a mid to lower end. Looks fine, but it's heavy, and it's TIG welded.
    Threaded... But for the lower/mid end forks shipping over the pond would make no sense.. Nevertheless, thanks for the offer!

    And @jestep: Custom would be an option, but I really would like to testride the bike before I went nuts...

  103. #303
    mtbr member
    Reputation:
    Join Date
    Jun 2011
    Posts
    538
    I have a fillet frame and fork from the mid 80s avail.
    Send me a pm

  104. #304
    mtbr member
    Reputation: fat tire trader's Avatar
    Join Date
    Sep 2010
    Posts
    112
    Quote Originally Posted by boardguru View Post
    You are absolutely correct about manufacturers of bike components. The Mafac's were mechanical motorcycle brake levers. And the components were touring parts. I still have the cantilever brake just not the levers. As one of mine broke from a crash and were replaced by Suntour levers. Just rying to find these brake levers to make the bike OEM again.
    Like many of us think, I too think you are mistakenly remembering Mafac instead of Magura.

  105. #305
    boardguru
    Reputation:
    Join Date
    Oct 2009
    Posts
    216
    Nope, the cantilever brakes clearly are stamped Mafac. The levers were the same brand . They came on my 1981 Ritchey Mt McKinley.

  106. #306
    mtbr member
    Reputation: laffeaux's Avatar
    Join Date
    Jan 2004
    Posts
    5,984
    Quote Originally Posted by boardguru View Post
    Nope, the cantilever brakes clearly are stamped Mafac. The levers were the same brand . They came on my 1981 Ritchey Mt McKinley.
    Are these wat you re looking for::
    https://www.ebay.com/itm/BRAKE-LEVERS-BIKE-CITY-VINTAGE-CANTILEVER-LEVER-SET-WEINMANN-MAFAC-RETRO-CYCLE/122604416992

    Fisher and Kelly were the US distributor for Magura levers, so the vast majority of bikes came with Magura levers. Tomiselli was as an option too, but generally used when trying to avoid Fisher/Kelly. I have never seen Mafac levers on a mountain bike.
    Last edited by laffeaux; 04-08-2018 at 12:30 PM.

  107. #307
    Phobia of petting zoos.
    Reputation:
    Join Date
    Oct 2005
    Posts
    995
    Quote Originally Posted by laffeaux View Post
    Probably more these ones if you can find them:

    VeloBase.com - Component: MAFAC Ville VDA (plastic levers)

    Mafac made a few cantis, but none as cute as these little fellas:

    VeloBase.com - Component: MAFAC Jacky

    Grumps

  108. #308
    mtbr member
    Reputation:
    Join Date
    May 2009
    Posts
    1,335
    Caemis, may or not help, but I have a 1985 Mt Fuji (made in Japan) frame, fork, headset, BB in 20 or 21". Fillet, threaded fork. Also a 1985 Schwinn High Sierra (made in Japan). with a threaded, Unicrown, Unicrown fork.

  109. #309
    artistic...
    Reputation: colker1's Avatar
    Join Date
    Jan 2004
    Posts
    7,574
    Quote Originally Posted by uncle grumpy View Post
    probably more these ones if you can find them:

    velobase.com - component: Mafac ville vda (plastic levers)

    mafac made a few cantis, but none as cute as these little fellas:

    velobase.com - component: Mafac jacky

    grumps
    want
    Attached Thumbnails Attached Thumbnails Thread for Wanted Items for Vintage MTB Only-bc34de12-c83d-439c-9d43-f72d6160d39f.jpeg  

    WTB: Bomber Z2 1 1/8 steerer, in good to excellent shape OR bomber rebuild kit.

  110. #310
    mtbr member
    Reputation: caemis's Avatar
    Join Date
    Dec 2015
    Posts
    161
    Quote Originally Posted by colker1 View Post
    want
    I think I can help you with these levers. If you can't get them in the states let me know, I'll send them over... And I might be able to get the right brakes as well.

    @fos'l: the Mt Fuji sounds interesting but I just need a fork not a complete frame set...

  111. #311
    EMBA MTB Lead Instructor
    Reputation: Thustlewhumber's Avatar
    Join Date
    Nov 2011
    Posts
    862
    Anyone have an old Suntour XC Sport rear derailleur? (1986 Trek 850) I think I stripped the threads on the bolt that holds the clutch on...
    Life is easy. Figure out the price of whatever it is you want, then pay that price.

  112. #312
    mtbr member
    Reputation:
    Join Date
    Jul 2012
    Posts
    499
    First..... I know I know..... rare as hen's teeth. But I would really like a WTB converted Suntour post for a Phoenix.

    Can anyone help a guy that really really wants to ride this Phoenix because he has been looking for one for pushing 15 years? Thanks!!!!!

  113. #313
    mtbr member
    Reputation: Linoleum's Avatar
    Join Date
    Aug 2008
    Posts
    875
    Looking for a small(er) sized frame to build up for my 12yr old son. Rockhopper? Something steel? Something more exotic? I'm open!

    Thx - Rich

  114. #314
    Ambivalent Luddite
    Reputation: Retro Dude's Avatar
    Join Date
    Jun 2010
    Posts
    290
    I have a 15" Rockhopper with a Rock Shox Judy SL ready to sell.

    If interested, PM me for pics & more info.
    __________________

    inFATuated

  115. #315
    mtbr member
    Reputation: Linoleum's Avatar
    Join Date
    Aug 2008
    Posts
    875
    Quote Originally Posted by Retro Dude View Post
    I have a 15" Rockhopper with a Rock Shox Judy SL ready to sell.

    If interested, PM me for pics & more info.
    PM'd.

  116. #316
    mtbr member
    Reputation: laffeaux's Avatar
    Join Date
    Jan 2004
    Posts
    5,984
    I'm looking for a 1-inch Tioga T-bone stem (black) in either a 130mm or possibly 120mm length. Rise in the neighborhood of 5 to 7 degrees. And in good condition.

    I'm looking for the exact stem pictured below, preferably in similar condition. The stem below is 140mm, which is too long. I'd gladly trade the pictured stem for a shorter version, or will trade wallet-sized portraits of US Presidents.
    Attached Thumbnails Attached Thumbnails Thread for Wanted Items for Vintage MTB Only-0503182048a.jpg  

    Each bicycle owned exponentially increases the probability that none is working correctly.

  117. #317
    mtbr member
    Reputation: laffeaux's Avatar
    Join Date
    Jan 2004
    Posts
    5,984
    Anyone have a spare Ringle Moby seat post - 26.8mm, black, in very good condition - that you're itching to part with?
    Each bicycle owned exponentially increases the probability that none is working correctly.

  118. #318
    mtbr member
    Reputation:
    Join Date
    Oct 2015
    Posts
    359
    Quote Originally Posted by laffeaux View Post
    Anyone have a spare Ringle Moby seat post - 26.8mm, black, in very good condition - that you're itching to part with?
    Hey Eric I have a decent Moby, but in silver 26.8 may not fit the bill, you could paint it? It'd be a VRC deal. Cheers
    Benjamin

  119. #319
    mtbr member
    Reputation: laffeaux's Avatar
    Join Date
    Jan 2004
    Posts
    5,984
    Quote Originally Posted by Mr. Claus View Post
    Hey Eric I have a decent Moby, but in silver 26.8 may not fit the bill, you could paint it? It'd be a VRC deal. Cheers
    Benjamin
    Thanks! I'm going to hold out of black. It completes a theme.
    Each bicycle owned exponentially increases the probability that none is working correctly.

  120. #320
    mtbr member
    Reputation: DoubleCentury's Avatar
    Join Date
    Nov 2005
    Posts
    2,011
    This shouldn't be so hard, but in several months I've not managed to find a Shimano Deore XT M732 rear hub with 36 holes. This is the 7 speed version of the hub and the hard part is the 36 holes.

    Update: Found this on eBay after 4 months of searching!
    Last edited by DoubleCentury; 10-14-2018 at 08:30 AM.

  121. #321
    mtbr member
    Reputation:
    Join Date
    Nov 2005
    Posts
    112
    Quote Originally Posted by DoubleCentury View Post
    This shouldn't be so hard, but in several months I've not managed to find a Shimano Deore XT M732 rear hub with 36 holes. This is the 7 speed version of the hub and the hard part is the 36 holes.
    Pretty sure I have one or two in 36h, no skewers though if I recall. Have to double check the pile of bike parts.

  122. #322
    mtbr member
    Reputation: DoubleCentury's Avatar
    Join Date
    Nov 2005
    Posts
    2,011
    Quote Originally Posted by wesMAmyke View Post
    Pretty sure I have one or two in 36h, no skewers though if I recall. Have to double check the pile of bike parts.
    That would be great. This is for a rather historic bike: Ross Shafer's personal Salsa #37.

  123. #323
    mtbr member
    Reputation: Williwoods's Avatar
    Join Date
    May 2004
    Posts
    1,012
    Looking for:

    17.5" Yeti FRO, 91 and older.
    15" WTB Phoenix

    Trade bait:

    19.5" unpainted Brazed Steelman

  124. #324
    mtbr member
    Reputation:
    Join Date
    Nov 2005
    Posts
    112
    Quote Originally Posted by DoubleCentury View Post
    That would be great. This is for a rather historic bike: Ross Shafer's personal Salsa #37.
    No luck with the 36h hub, only have a 36h m730 front. Have both variations of hub shell and axle width in 732 hubs, but both are 32h.

  125. #325
    mtbr member
    Reputation: DoubleCentury's Avatar
    Join Date
    Nov 2005
    Posts
    2,011
    Quote Originally Posted by wesMAmyke View Post
    No luck with the 36h hub, only have a 36h m730 front. Have both variations of hub shell and axle width in 732 hubs, but both are 32h.
    Ah, bummer. Thank you for looking.

    I think 36H became much less common with M732 versus M730.

  126. #326
    mtbr member
    Reputation: Feldybikes's Avatar
    Join Date
    Feb 2004
    Posts
    899
    I think I have a 36h 7 speed XT hubset f&r. Not sure if it's exactly M732. IIRC it's not a HG lockring, it's the external thread (IG?). Can dig around my basement and get some picks if/when I find them.

  127. #327
    mtbr member
    Reputation: DoubleCentury's Avatar
    Join Date
    Nov 2005
    Posts
    2,011
    Quote Originally Posted by Feldybikes View Post
    I think I have a 36h 7 speed XT hubset f&r. Not sure if it's exactly M732. IIRC it's not a HG lockring, it's the external thread (IG?). Can dig around my basement and get some picks if/when I find them.
    I think you could run both on M732. Otherwise M730 was 6 speed with the external lock ring. If you find something I'd be very interested so I can finish Ross' bike. Thanks for looking!

  128. #328
    mtbr member
    Reputation: Feldybikes's Avatar
    Join Date
    Feb 2004
    Posts
    899
    I went down to the dungeon and found my box of old hubs but not the ones I was looking for. Sorry, my bad. Must've gotten rid of them. I'll let you know if they somehow materialize.

  129. #329
    mtbr member
    Reputation: DoubleCentury's Avatar
    Join Date
    Nov 2005
    Posts
    2,011
    Quote Originally Posted by Feldybikes View Post
    I went down to the dungeon and found my box of old hubs but not the ones I was looking for. Sorry, my bad. Must've gotten rid of them. I'll let you know if they somehow materialize.
    Thanks so much for looking!

  130. #330
    mtbr member
    Reputation:
    Join Date
    Oct 2015
    Posts
    359
    Hey DC,

    I know not exactly, but I have a have a nicely built M732 (7 speed) laced to a Mavic M-231 in very good shape. Yes, it's 32 hole, but....worse case it's yours for shipping cost. dig it and best to you, the hunt for the bob-tail is always

  131. #331
    mtbr member
    Reputation: DoubleCentury's Avatar
    Join Date
    Nov 2005
    Posts
    2,011
    Quote Originally Posted by Mr. Claus View Post
    Hey DC,

    I know not exactly, but I have a have a nicely built M732 (7 speed) laced to a Mavic M-231 in very good shape. Yes, it's 32 hole, but....worse case it's yours for shipping cost. dig it and best to you, the hunt for the bob-tail is always
    Thanks for the generous offer! I'm looking specifically for 36H because I have a Bontrager cut-down rim in that count which is a match for an existing front wheel. I guess if I could come up with a 32H Bontrager cut down my life would be a lot simpler, but that is asking a lot to begin with.

  132. #332
    mtbr member
    Reputation:
    Join Date
    Jun 2018
    Posts
    9

    ** FOUND ** WTB older 26 x 1.75 wheelset

    **FOUND**

    Scored a sweet pair, thanks everyone!

    Building up a bar bike, need a decent wheelset with nutted axles suitable for late '80s mtb with 5 speed Shimano cassette...120mm? Looking to spend <$100 shipped, I am halfway between GJ and Crested Butte, CO if you're close enough for a fly-by.
    Last edited by Silverhair; 07-29-2018 at 08:59 AM. Reason: Found

  133. #333
    mtbr member
    Reputation: StevieDT's Avatar
    Join Date
    Jun 2004
    Posts
    62
    I have a roll of yellow Shimano brake housing. not sure of the vintage but it's yellow. also have white.

    Quote Originally Posted by tductape View Post
    Starting a new project and looking for some missing bits.

    Seek in good to great condition. All proper for 1983:

    Front and rear derailleurs Suntour Mountech. FOUND
    Front/Rear (130) Phil Wood hubs. Steel center, prefer logo intact.
    Suntour XCII Pedals.
    Sella Royal anatomic seat?
    Campagnolo wheel quick release skewers. FOUND
    Shift/Brake housing (yellow preferred) proper for a 1983 build.
    Seidisport chain.

  134. #334
    mtbr member
    Reputation:
    Join Date
    May 2007
    Posts
    147
    I'm seeking a 80mm 1/18" steerer fork with v brake bosses to replace my dead 1996 Judy XC. Thanks.
    Seeking a 90's or 00s 80mm 26" suspension fork.

  135. #335
    mtbr member
    Reputation:
    Join Date
    Jun 2012
    Posts
    135
    Quote Originally Posted by CRXPilot View Post
    I'm seeking a 80mm 1/18" steerer fork with v brake bosses to replace my dead 1996 Judy XC. Thanks.
    how long do you need the steerer to be?

  136. #336
    Ambivalent Luddite
    Reputation: Retro Dude's Avatar
    Join Date
    Jun 2010
    Posts
    290

    WTB: Suntour XC-Pro Headset

    Looking for a 1" Suntour XC-Pro Grease Guard Headset.

    Thanks
    __________________

    inFATuated

  137. #337
    mtbr member
    Reputation:
    Join Date
    May 2007
    Posts
    147
    Quote Originally Posted by stingray230sx View Post
    how long do you need the steerer to be?
    6.5" and up.
    Seeking a 90's or 00s 80mm 26" suspension fork.

  138. #338
    mtbr member
    Reputation:
    Join Date
    Aug 2014
    Posts
    18
    I'd be interested in a silver set of Dia-Compe 986s.
    Last edited by drew54; 07-18-2018 at 11:02 AM.

  139. #339
    DFA
    DFA is offline
    mtbr member
    Reputation: DFA's Avatar
    Join Date
    Jan 2004
    Posts
    404
    Quote Originally Posted by drew54 View Post
    I'd be interested in a silver pair of Dia-Compe 986s.

    Have a new set. Wouldn't be able to verify if they've scratched themselves living in the Big Box of Brakes for years without opening the bag.


  140. #340
    Life's a Garden, dig it!
    Reputation: chuckha62's Avatar
    Join Date
    Jul 2006
    Posts
    3,959

    Hayes 22mm Calipers

    If anyone has any old Hayes 22mm mount brake calipers just lying around (with or without levers and M/C), I'd be interested.

    Thanks!

    Chuck
    Will you shut up, man?!

  141. #341
    mtbr member
    Reputation: caemis's Avatar
    Join Date
    Dec 2015
    Posts
    161
    Hi, I am looking for a Cross frameset in the range of 56cm ST - something like Rock Lobster, Bontrager, ...
    Maybe you have something to share in the shed.

    Cheers and best wishes from Berlin,
    M.

  142. #342
    mtbr member
    Reputation:
    Join Date
    Jun 2018
    Posts
    9
    If any one has a Simplex SJA103 front derailleur they are willing to sell I`m looking for one in good working order to NOS condition.

  143. #343
    mtbr member
    Reputation: SteelAppeal's Avatar
    Join Date
    Jun 2018
    Posts
    19

    Ritchey McKinley specs

    Quote Originally Posted by boardguru View Post
    Nope, the cantilever brakes clearly are stamped Mafac. The levers were the same brand . They came on my 1981 Ritchey Mt McKinley.
    In an effort to help you recreate originality I wanted to let you know some 'net research shows the Ritchey McKinley model was introduceed in 1982 as shown in this Mountainbike Flyer signed by Gary Fisher: https://ritchey.vintagebicycledataba...es1982_102.jpg

    I have a Ritchey stamped with a 1981 serial number but it has the "Ritchey Mountainbike" decal and those models weren't introduced until 1982 so maybe you have the same situation.

    The 1982 model was spec'd with Mafac tandem brakes but Magura brake levers as shown on this 1982 catalog page from the same website:
    Thread for Wanted Items for Vintage MTB Only-mountainbikes1982_09-mckinley.jpg

    I guess it's possible they couldn't get the Magura levers they needed so substituted the Mafacs or yours were replaced somewhere along the way but the catalog specs show Magura levers.

    Maybe someone who was around the shop at that time can clarify if they would've subbed parts on non-custom bikes and if serials were stamped for years prior to model releases due to release schedules or some other reason.

    Hope this helps.

  144. #344
    mtbr member
    Reputation:
    Join Date
    Jan 2018
    Posts
    2

    1986 Bridgestone MB2 19"

    Im considering selling a 1986 bridgestone MB2 19" that is dead stock and an EASY 8.5+++ /10 its freaken ridiculous how nice this is. green/red color It has original tires that are great and not dry rot at all. I'll grab a pic tonight or pm me

  145. #345
    mtbr member
    Reputation:
    Join Date
    Jun 2018
    Posts
    9
    WTB Early Ritchey fillet brazed bull moose bars in nickel finish with 22.2mm quill. If anyone has these handlebars for sale please send me a pm with pictures, handlebar width measurement & price. I am located in the S.F. Bay Area.

  146. #346
    Jeprex
    Reputation:
    Join Date
    Aug 2018
    Posts
    3

    Kona P2 26 v-Brake QR

    Hello from Norway.
    I desperately need a Kona P2 fork to my Kona Kula 1996 project. V-brake 26"
    AC minimum 42, took off one Judy XC.
    is there anyone for sale out there ??I paid good !!

  147. #347
    mtbr member
    Reputation: Williwoods's Avatar
    Join Date
    May 2004
    Posts
    1,012
    Pretty sure I have not posted this yet, apologies if this is a repeat...

    Wanted:

    NOS/Mint Ritchey Vantage Pro 32 Hole "6061" stickered version
    NOS/Mint Ritchey Vantage Comp 28 Hole "6061" stickered version

  148. #348
    mtbr member
    Reputation:
    Join Date
    Jun 2012
    Posts
    135
    Quote Originally Posted by Jeprex View Post
    Hello from Norway.
    I desperately need a Kona P2 fork to my Kona Kula 1996 project. V-brake 26"
    AC minimum 42, took off one Judy XC.
    is there anyone for sale out there ??I paid good !!
    I have this one, stamped 99 on the steerer tube
    Attached Thumbnails Attached Thumbnails Thread for Wanted Items for Vintage MTB Only-kona-p2-sizes.jpg  

    Thread for Wanted Items for Vintage MTB Only-kona-p2.jpg  

    Thread for Wanted Items for Vintage MTB Only-kona-velocity-stem-silver.jpg  


  149. #349
    mtbr member
    Reputation:
    Join Date
    Jun 2012
    Posts
    135
    Quote Originally Posted by CRXPilot View Post
    6.5" and up.
    sorry been recovering from a surgery

    red judy has 7.5" steerer
    white fudy has 7" steerer

    the red DH needs a decal [left lower missing] its as I got it on a bike I am redoing except I cleaned and relubed with fresh slickoleum

    the white judy received new oem 80mm damper [drilled for the 8mm retaining bolts, titanium from Toronto cycles] and a new oem set of type three springs
    Attached Thumbnails Attached Thumbnails Thread for Wanted Items for Vintage MTB Only-dampers.jpg  

    Thread for Wanted Items for Vintage MTB Only-judy-dh-1.jpg  

    Thread for Wanted Items for Vintage MTB Only-judy-dh-2.jpg  

    Thread for Wanted Items for Vintage MTB Only-judy-dh.jpg  

    Thread for Wanted Items for Vintage MTB Only-80mm-judy-back-together.jpg  

    Thread for Wanted Items for Vintage MTB Only-80mm-judy-fresh-slickoleum.jpg  

    Thread for Wanted Items for Vintage MTB Only-80mm-judy-left-stancion-full-slickoleum.jpg  

    Thread for Wanted Items for Vintage MTB Only-80mm-judy-right-stancion-full-slickoleum.jpg  

    Thread for Wanted Items for Vintage MTB Only-front-view.jpg  


  150. #350
    Jeprex
    Reputation:
    Join Date
    Aug 2018
    Posts
    3
    Sweet,do you know the AC ?
    Do you sell and send to Norway ?

  151. #351
    mtbr member
    Reputation:
    Join Date
    Jun 2012
    Posts
    135
    Yes, i measure 410mm AC, sorry i see you need 420mm?

  152. #352
    Jeprex
    Reputation:
    Join Date
    Aug 2018
    Posts
    3
    Price ink sending ?

  153. #353
    mtbr member
    Reputation:
    Join Date
    Jun 2012
    Posts
    135
    Quote Originally Posted by Jeprex View Post
    Price ink sending ?
    I am asking 100$ usd for the p2 and matching velocity stem
    Email or pm me your post code and i can get you a shipping quote
    [email protected]

  154. #354
    mtbr member
    Reputation:
    Join Date
    Sep 2010
    Posts
    186
    Looking for anything specialized from 96 back. Clothing, parts, bikes etc. Let me know what you have.

  155. #355
    mtbr member
    Reputation: Feldybikes's Avatar
    Join Date
    Feb 2004
    Posts
    899
    Quote Originally Posted by Steve Adams View Post
    Looking for anything specialized from 96 back. Clothing, parts, bikes etc. Let me know what you have.
    This pair of bib shorts from about 1996 has been worn many dozens of times, but if youre a big fan, then you probably cant resist:

    Thread for Wanted Items for Vintage MTB Only-c0b37b92-ef51-473f-8c6e-3d8285895ec8.jpg

    Ok that was a joke. (Unless you really want it, then Im 100% serious) I do also have this windbreaker which is from 1993 or so Id guess?? It has a Suntour logo on it, anway, and the sleeves date back to the last time neon was cool.

    Thread for Wanted Items for Vintage MTB Only-5115bd03-4ed1-46f7-9d05-7a851b18e9c6.jpg

    Pm if interested.

  156. #356
    mtbr member
    Reputation:
    Join Date
    Jun 2018
    Posts
    9
    I`m still looking for a set of early Ritchey fillet brazed Bullmoose bars with the original nickel finish & larger 22.2 quill size if anyone has some for sale

  157. #357
    mtbr member
    Reputation:
    Join Date
    Aug 2014
    Posts
    18
    Anyone have a GT Bologna fork with a long steering tube? 9+ inches long.

  158. #358
    mtbr member
    Reputation: caemis's Avatar
    Join Date
    Dec 2015
    Posts
    161
    Hi, for my newest project I am after a decent high rise quill stem, such as a Salsa P7 preferable with 1 1/8" steerer. But I will consider everything with up to 120mm and between 25 and 53

    Cheers!
    Last edited by caemis; 09-26-2018 at 08:02 AM.

  159. #359
    mtbr member
    Reputation: fat tire trader's Avatar
    Join Date
    Sep 2010
    Posts
    112
    Hello, I'm looking for a WTB Grease Guard rear hub in 40 or 48 hole preferably in black.
    I have lots to trade.
    Thanks,
    Chris

  160. #360
    mtbr member
    Reputation:
    Join Date
    Aug 2014
    Posts
    18
    I'm currently looking for:
    Silver 27.0 Ritchey seatpost with just the TR logo
    Black or silver 26.8 Ritchey seatpost
    WTB black 27.2 seatpost
    90s Ritchey Logic triple crankset, 175 arm length

  161. #361
    mtbr member
    Reputation:
    Join Date
    Nov 2005
    Posts
    112
    Quote Originally Posted by drew54 View Post
    I'm currently looking for:
    Silver 27.0 Ritchey seatpost with just the TR logo
    Black or silver 26.8 Ritchey seatpost
    WTB black 27.2 seatpost
    90s Ritchey Logic triple crankset, 175 arm length
    I've got a Ritchey crank in 175mm. Decent shape, some heel rub to logo.

  162. #362
    Ambivalent Luddite
    Reputation: Retro Dude's Avatar
    Join Date
    Jun 2010
    Posts
    290
    Hi - Looking for some parts:

    - Shimano XT BR-M732 cantilevers in black

    - Shimano black chainrings for FC-M730 cranks

    - Suntour XC Pro cantilevers in black


    Thanks
    __________________

    inFATuated

  163. #363
    mtbr member
    Reputation:
    Join Date
    Oct 2018
    Posts
    1
    Quote Originally Posted by chuckha62 View Post
    If anyone has any old Hayes 22mm mount brake calipers just lying around (with or without levers and M/C), I'd be interested.

    Thanks!

    Chuck
    are you still looking for these, i am pretty sure i have a complete set or maybe two.

    Ruben

  164. #364
    mtbr member
    Reputation:
    Join Date
    Nov 2005
    Posts
    2
    Quote Originally Posted by Williwoods View Post
    Looking for:

    17.5" Yeti FRO, 91 and older.
    15" WTB Phoenix

    Trade bait:

    19.5" unpainted Brazed Steelman
    Are you still looking for a 15" Phoenix? I have a '96(?) that is too small for me...

  165. #365
    mtbr member
    Reputation: Williwoods's Avatar
    Join Date
    May 2004
    Posts
    1,012
    yes

  166. #366
    mtbr member
    Reputation:
    Join Date
    Nov 2004
    Posts
    586

    Wanted- Old School Syncos Seatpost Cradle- Lower cradle

    I have an old Ti Syncros seat post that I want to bring back to life- I seemed to have lost the lower cradle.
    Anyone have this part or an old syncs post that they don't care about?

  167. #367
    No known cure
    Reputation: Vader's Avatar
    Join Date
    Feb 2004
    Posts
    3,789
    Thomson saddle rail clamps will fit the radius of the Syncros post perfectly and will get you on the trail. Sorry for the pic. It's almost 15 years old.
    Attached Images Attached Images  
    Ripping trails and tipping ales

  168. #368
    mtbr member
    Reputation:
    Join Date
    Aug 2014
    Posts
    18
    Currently I am looking for a Tange MTB fork that is 1 inch threaded. Minimum steering tube 200 mm.
    Name your price.

    I can trade a lugged 83 Tange 196mm fork.
    I also have a pair of threadless Univega racelite forks that I can measure if anyone is interested.
    Last edited by drew54; 01-13-2019 at 01:36 PM.

  169. #369
    mtbr member
    Reputation: caemis's Avatar
    Join Date
    Dec 2015
    Posts
    161
    Hi there,

    I am looking for two things:

    1. a Ventana El Toro Singlespeed from 1994/95 as described by Robert Ives in dirtrag a while ago (any information, pics, etc. will be appreciated)

    2. dedicated single speed mountain frame in the 18/19" area (steel or ti) from the late 80s to early 2000s

    Thanks,
    M.

  170. #370
    mtbr member
    Reputation:
    Join Date
    Apr 2010
    Posts
    146
    Hi All,

    Looking for...

    Stem: either Cook Bros VGS or Moots Ti, in 1" quill style

    Derailleur: either Paul or Precision billet proshift, rear only

    Cheers,

  171. #371
    mtbr member
    Reputation:
    Join Date
    Dec 2013
    Posts
    154
    I have a few thumb shifters. Let me know via pm if interested.
    Two sets of Suntour 7 speed xcpro.
    One Shimano Deore xt 7sp. Rear only
    One set of Suntour power control 7speed.
    Suntour shifters are 1 slightly used and new. Deore and power control are used great shape.

    Sent from my moto x4 using Tapatalk

  172. #372
    mtbr member
    Reputation: datasurfer's Avatar
    Join Date
    Nov 2006
    Posts
    323
    Interested in your suntour shifters (both power control and xc pro). I sent a pm. you can get ahold of me at [email protected]. Thanks.

  173. #373
    mtbr member
    Reputation: datasurfer's Avatar
    Join Date
    Nov 2006
    Posts
    323
    Interested in your shifters. sent you a PM. [email protected] also works.

    Quote Originally Posted by ladeekus View Post
    I have a few thumb shifters. Let me know via pm if interested.
    Two sets of Suntour 7 speed xcpro.
    One Shimano Deore xt 7sp. Rear only
    One set of Suntour power control 7speed.
    Suntour shifters are 1 slightly used and new. Deore and power control are used great shape.

    Sent from my moto x4 using Tapatalk

  174. #374
    mtbr member
    Reputation: gm1230126's Avatar
    Join Date
    Nov 2005
    Posts
    2,989
    Wanted 1994 vintage Profile "Bar None" aluminum handlebar with the Profile logo right and left of bar center. Need it for a period correct build of the actual 1995 GT Bicycle Catalog cover shot frame.
    Needed: 26.8mm XTR seatpost, blue GT/Grundig Jersey.

  175. #375
    mtbr member
    Reputation:
    Join Date
    Jan 2004
    Posts
    193
    Wanted Either a set of:

    grafton speed controllers in silver OR

    Paul Stoplights in Black.

    Willing to trade silver graftons for black pauls and vice versa or buy outright.

    Condition - good usable is what matters most, can show wear and tear, we are talking parts that are over 20 years old.

  176. #376
    mtbr member
    Reputation:
    Join Date
    Aug 2014
    Posts
    18
    I found a silver 27.0 Ritchey 210mm seat post that is about 2 inches short for me. I would like to sell or trade for a 300mm or longer. Pictures available upon request.

    Also looking for Suntour XC Pro front/rear derailleurs.
    Last edited by drew54; 01-27-2019 at 05:38 PM.

  177. #377
    slow
    Reputation: sgltrak's Avatar
    Join Date
    Feb 2005
    Posts
    6,605
    Quote Originally Posted by drew54 View Post
    ...
    Also looking for Suntour XC Pro front/rear derailleurs.
    This XC Pro rear derailleur has been on our local craigslist for a few weeks:
    https://fortcollins.craigslist.org/b...801187992.html

  178. #378
    Ambivalent Luddite
    Reputation: Retro Dude's Avatar
    Join Date
    Jun 2010
    Posts
    290
    Wanted: Suntour XC Pro brakes for the front, NOS or near-NOS in black.

    Have cash or NOS Shimano BR-M732 NOS brakes in black for trade.

    Thanks
    __________________

    inFATuated

  179. #379
    mtbr member
    Reputation: cegrover's Avatar
    Join Date
    Oct 2004
    Posts
    1,686
    Wanted and willing to trade...

    1) Want: SR Laprade 26.8 seatpost - 250mm or longer. Willing to trade my 26.6 x 250 SR Laprade in excellent condition.

    2) Want: Ritchey Mountainbikes fillet brazed bullmoose handlebar in silver and with 22.2mm quill - for 1983 Mt. Tam. Will trade my black, alloy one for later Ritchey bike (also 22.2mm).

    Sent from my SM-G960U using Tapatalk
    Last edited by cegrover; 02-16-2019 at 09:37 PM.

  180. #380
    mtbr member
    Reputation: cegrover's Avatar
    Join Date
    Oct 2004
    Posts
    1,686
    FYI: I have a message in to Nitto to see if this handlebar was recalled. Some have told me it likely way. If so, it won't be available for a trade!

  181. #381
    mtbr member
    Reputation: Powerglider's Avatar
    Join Date
    Dec 2017
    Posts
    5
    WANTED: Long Rock Shox Judy bolt on crown 9 1/2'' x 1 1/8'' or C/S/S Asm. I have a bunch of MAG/JUDY crowns & parts to trade or Cash.

    -John Y.

  182. #382
    mtbr member
    Reputation:
    Join Date
    Nov 2005
    Posts
    112
    Quote Originally Posted by Powerglider View Post
    WANTED: Long Rock Shox Judy bolt on crown 9 1/2'' x 1 1/8'' or C/S/S Asm. I have a bunch of MAG/JUDY crowns & parts to trade or Cash.

    -John Y.
    Have both a NOS uncut Judy XC steerer/crown, and a long steerer/crown/stanchion assembly from a later Judy or maybe SID.

    I'll have to go measure, but I think the NOS one is 10" at least.

  183. #383
    mtbr member
    Reputation: caemis's Avatar
    Join Date
    Dec 2015
    Posts
    161
    Hi there, I am looking for another vintage Rock Lobster frame(set) matchin my 6ft height - any info is much appreciated. Thanks! M.

  184. #384
    mtbr member
    Reputation: Powerglider's Avatar
    Join Date
    Dec 2017
    Posts
    5
    Quote Originally Posted by wesMAmyke View Post
    Have both a NOS uncut Judy XC steerer/crown, and a long steerer/crown/stanchion assembly from a later Judy or maybe SID.

    I'll have to go measure, but I think the NOS one is 10" at least.
    PM Sent... -jy

  185. #385
    mtbr member
    Reputation: DoubleCentury's Avatar
    Join Date
    Nov 2005
    Posts
    2,011
    Looking for an Ibis titanium stem, threadless 1-1/8", for a Bow-Ti build.

  186. #386
    mtbr member
    Reputation: Powerglider's Avatar
    Join Date
    Dec 2017
    Posts
    5
    Looking For:

    Grip Shift SRT-800 shift covers and or cover/grip set. Used in good condition from a cracked pair of X-Rays under your bench would work too.

    Thanks in advance... -John Y.

  187. #387
    artistic...
    Reputation: colker1's Avatar
    Join Date
    Jan 2004
    Posts
    7,574
    Want_ 1in threaded headset. Preferably King 2nut but could do w/ something else. Have lots of stuff here.. from a suntour xc 26.4 seatpost to control tech ahead 1in stem 135/10 in silver. dia compe ss7 brake levers.
    I could buy it too....
    WTB: Bomber Z2 1 1/8 steerer, in good to excellent shape OR bomber rebuild kit.

  188. #388
    Kick Start My Heart
    Reputation: davez26's Avatar
    Join Date
    Dec 2004
    Posts
    567
    Quote Originally Posted by Powerglider View Post
    Looking For:

    Grip Shift SRT-800 shift covers and or cover/grip set. Used in good condition from a cracked pair of X-Rays under your bench would work too.

    Thanks in advance... -John Y.
    I saw a set of shifters over @ www.bikerecyclery.com that may interest you.


    Sent from my iPad using Tapatalk

  189. #389
    mtbr member
    Reputation: richierich1966's Avatar
    Join Date
    Aug 2019
    Posts
    53

    Rock shox judy xcl hydra triple crown

    WTB or trade:
    I need both crowns and steerer or at least a top crown for a ('99?) Shox Judy XLC Hydra. It has 28mm stanchions and a double crown. The top crown was available in three different configuration - regular (flat), medium (about 1" of drop), LMK what you have-
    THANKS!

  190. #390
    mtbr member
    Reputation: DeoreDX's Avatar
    Join Date
    Jul 2007
    Posts
    57
    Looking for an upper link mount for old Girvin linkage forks. Son wants to keep his Girvin but he really needs a shorter stem so hoping with an upper link mount I can fit on an aftermarket stem.
    -DeoreDX

  191. #391
    mtbr member
    Reputation:
    Join Date
    May 2016
    Posts
    7
    ISO Titus Cyborgs - full suspension design prior to racer-x... were used as rental bikes at poison spider around 96, came in aluminum and titanium, while bikes or just the derailleur hangar!

  192. #392
    This place needs an enema
    Reputation: mikesee's Avatar
    Join Date
    Aug 2003
    Posts
    15,068
    Looking for a set of late 90's SRAM carbon v-brake levers. There are at least two models, IIRC one was labeled 9.0, the other was 9.0sl.

    These, and these.

    Either will work, and ideally I'd buy a few sets if I could.

    PM me or hit me direct: mike dot curiak at gmail dot com

    Thanks.

  193. #393
    mtbr member
    Reputation: mainlyfats's Avatar
    Join Date
    Oct 2005
    Posts
    1,206
    Does anyone have a Paul front derailleur they want to part with?

  194. #394
    Bikes in jeans
    Reputation: jestep's Avatar
    Join Date
    Jul 2004
    Posts
    2,254
    Quote Originally Posted by mainlyfats View Post
    Does anyone have a Paul front derailleur they want to part with?
    They hit ebay from time to time if you want to set an alert but you're looking at $$$ for one.
    WTB: Med Bontrager Ti Lite, PM Me...

  195. #395
    mtbr member
    Reputation: mainlyfats's Avatar
    Join Date
    Oct 2005
    Posts
    1,206
    Quote Originally Posted by jestep View Post
    They hit ebay from time to time if you want to set an alert but you're looking at $$$ for one.
    Yeah... It's for a project and is the only 34.9 front derailleur I know of that fully disassembles. Plus, it's Paul. Any other candidates?

  196. #396
    mtbr member
    Reputation:
    Join Date
    Sep 2014
    Posts
    8
    Looking for a nice set of Shimano XT pedals part # PDM 735
    Thanks for looking

  197. #397
    mtbr member
    Reputation:
    Join Date
    Sep 2014
    Posts
    8
    Looking for a very nice set of Shimano XT shift levers part # BLM 733

    Thanks for looking

  198. #398
    Proudly Plus-Sized
    Reputation: blaklabl's Avatar
    Join Date
    Mar 2011
    Posts
    1,623
    Looking for a mid-90's (94-96) Stumpjumper Frame & Fork (rigid), steel. Size 18" or 19" please. Thank you!
    MTBR: Your dad's online mountain bike forum.



  199. #399
    mtbr member
    Reputation: mainlyfats's Avatar
    Join Date
    Oct 2005
    Posts
    1,206
    Anyone have a tandem they'd like to move? Love to be able to share my passion with my autistic son. Must be able to box and ship. PM me.





    EDIT:
    Found one!
    Last edited by mainlyfats; 4 Weeks Ago at 02:42 PM.

  200. #400
    I Tried Them ALL... SuperModerator
    Reputation: Cayenne_Pepa's Avatar
    Join Date
    Dec 2007
    Posts
    6,744

    For Sale

    Cleaning-out the Vintage bin:
    1) Tektro 165mm rotors, for Avid BBDB mechanical disc x2 - straight, with 45 miles $25/shipped to USA

    2) Shimano XTR FC-M952 Octalink 175mm w/ Spider - no chainrings, $50/shipped to USA

    Thread for Wanted Items for Vintage MTB Only-tektro_165.jpg

    Thread for Wanted Items for Vintage MTB Only-m952_spider.jpg

    Thread for Wanted Items for Vintage MTB Only-m952_left.jpg


    Sent from my iPhone using Tapatalk
    "This is a male-dominated forum... there will be lots of Testosterone sword-shaming here" ~ Kenfucius

Page 2 of 3 FirstFirst 123 LastLast

Similar Threads

  1. viewing unread posts within a thread?
    By icycle in forum Site Feedback/Issues
    Replies: 2
    Last Post: 10-20-2017, 07:33 AM
  2. Replies: 4
    Last Post: 08-26-2013, 12:21 PM
  3. Thread spacing for cantilever posts? help
    By ncal408 in forum 29er Bikes
    Replies: 5
    Last Post: 05-30-2011, 07:32 PM

Members who have read this thread: 113

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

THE SITE

ABOUT MTBR

VISIT US AT

© Copyright 2020 VerticalScope Inc. All rights reserved.