Flux RP3 shock on 04 Burner- Mtbr.com
Results 1 to 5 of 5
  1. #1
    meow
    Reputation: Cato's Avatar
    Join Date
    Feb 2004
    Posts
    588

    Flux RP3 shock on 04 Burner

    I have an opportunity to upgrade my basic Fox ProPedal shock to an RP3 with Propedal that was original on an '05 Flux. Holding the RP3 up to the ProPedal the eye to eye measurement is the same. However, since the Flux has about another 1/2" of rear travel, I'm wondering if the stroke on the RP3 is longer.This would affect the the rise rate if the valving is set differently for more travel. Any ideas?

    Thx!

  2. #2
    Nothing here
    Reputation: Unknownrash's Avatar
    Join Date
    Sep 2004
    Posts
    757
    I think the Burner is 6.5x1.5" and the Flux should be 7.5x2.0.

  3. #3
    meow
    Reputation: Cato's Avatar
    Join Date
    Feb 2004
    Posts
    588

    Wrong....

    Turner's site states the stock RP3 shock on the Flux is 6.5" x 1.5". If the stock Burner shock is the same length then it's gold. Can't find that data though.

  4. #4
    Nothing here
    Reputation: Unknownrash's Avatar
    Join Date
    Sep 2004
    Posts
    757
    My bad on the Flux. I measured my Burner and it is indeed 6.5x1.5.

  5. #5
    rr
    rr is offline
    I don't do PC
    Reputation: rr's Avatar
    Join Date
    Dec 2003
    Posts
    7,399
    I have an RP3 on my Burner, works great, 6.5x1.5, and it has the medium valving thats marked on the shock.

Members who have read this thread: 0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

THE SITE

ABOUT MTBR

VISIT US AT

© Copyright 2019 VerticalScope Inc. All rights reserved.