Reba Race Pushloc "sticky"- Mtbr.com
Results 1 to 2 of 2
  1. #1
    mtbr member
    Reputation:
    Join Date
    Dec 2007
    Posts
    44

    Reba Race Pushloc "sticky"

    Hopefully someone can help me with this. I have an 09 Reba Race with pushloc. I just got it this year and have put about 300 miles on it. The pushloc was working fine, but now it is "sticking" in the locked out position.

    So far I have:
    Changed the cable and housing
    Removed the Motion Control damper and verified the spring is in its proper position
    Verified the pushloc lever works
    Disassembled and reassembled the fork lock out mechanism
    Reviewed the service manual
    Reviewed the Rock Shox pushloc installation video

    Symptoms:
    With no cable attached the lock out will return to the open position almost 100% of the time, but if it gets cocked, the spring cannot overcome the friction to return to the open position.

    It appears that when the cable is attached it is cocking the lockout mechanism. When it is stuck I can push the forward part of the mechanism down, and it will return to its normal position.

    Any ideas how to alleviate this problem?

  2. #2
    Never trust a fart
    Reputation: frdfandc's Avatar
    Join Date
    Sep 2007
    Posts
    4,342
    You will need to visit your LBS and have them call Rock Shox (Sram) and get them to send out a new lockout damper (parts have a 2 year warranty) and replace it.

Members who have read this thread: 0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

THE SITE

ABOUT MTBR

VISIT US AT

© Copyright 2020 VerticalScope Inc. All rights reserved.