Race Face Evolve DH ISIS Crankset- Mtbr.com
Results 1 to 4 of 4
  1. #1
    Up In Smoke
    Reputation: Train Wreck's Avatar
    Join Date
    Feb 2005
    Posts
    896

    Race Face Evolve DH ISIS Crankset

    Does anybody have any experience with these cranks on a SS?

  2. #2
    jmw
    jmw is offline
    mtbr member
    Reputation: jmw's Avatar
    Join Date
    Feb 2005
    Posts
    832
    my experiences have been less than ideal using ISIS on my mtb ss but I am only one.....

    if you do use ISIS, make sure to use the steel crank bolts and not aluminum, plus add some lock-tite to the threads....
    future nature

  3. #3
    mtbr member
    Reputation:
    Join Date
    Jun 2004
    Posts
    305
    I'm using that setup on my SS Steelhead (and Haro before that) with the stock 32 T ring and bash guard, granny gear removed and I have had no problems with it at all. I run an ACS BMX chain and it meshes well. No BB problems...yet.

  4. #4
    mtbr member
    Reputation:
    Join Date
    Jun 2004
    Posts
    305
    and DON'T add loctite to the crank bolt threads! Grease them and use the recommended torque (425 or 450 inch pounds, I believe).

Members who have read this thread: 0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

THE SITE

ABOUT MTBR

VISIT US AT

© Copyright 2019 VerticalScope Inc. All rights reserved.