Mountain Bike Reviews Forum banner

Stroker...

639 views 3 replies 4 participants last post by  locnrock 
#1 ·
Nearly all Strokers I have seen have a similar problem…
As they break in I mean with in the first month of use the lever rebound gets too slow and sometimes it doesn’t return at all…..The master cylinder piston sticks in place and the lever plays free till reaching it and then there is no more place to push …only putting pressure on the lever putts pressure on the pads….i mean the whole hydro system comes out of dynamic state and works in a static phase…..

But as said on better ones the lever moves but the rebound is very slow….it seems like the O-ring or the cup inside the M cylinder is a little too big for the inner bore of the M cylinder…..
Any suggestions…or
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top