Mountain Bike Reviews Forum banner

know anyone who still has a CPC Racing rig?

1K views 1 reply 2 participants last post by  DrEVS 
#1 ·
straight outta Utah, originally made by a snowmobile fab shop.
here's a late-model BHD.


They actually were pretty novel, especially back in 1999. please refrain from commenting on the lack of brakes and monstrous bottom bracket height.

here's a lil info about em,
http://www.ridemonkey.com/forums/archive/index.php/t-128377.html

http://forums.mtbr.com/showthread.php?t=161610&page=1

point is: I bought a hadley wheel that said cpc racing at a swap meet. Turns out they were custom made spaced at 145mm, and the only bike that can use it is a CPC with a concentric bottom bracket. the rotor spacing is wacky too.
Since you need this hub to make those bikes go, I thought I'd see if anyone needs one.
 
See less See more
1
#2 ·
sever said:
please refrain from commenting on the lack of brakes and monstrous bottom bracket height.
Or the reverse stem, or the "Bad Hair Day" graphics, or the etc etc. :)

I actually stayed with those guys back in the late 90's when we were all out for the Snow Summit NORBA National. Cool guys. Their sponsorship with Tioga forced them to run 2.3 Factory DH tires on that bike... can you even imagine?
It's surely overbuilt for DH racing, but the technology and application was cool... probably more appropriate for big huckers than DH racers.

Don't know anyone who currently has one.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top