Mountain Bike Reviews Forum banner

P321 Hub Conversion from XD to Shimano Driver for SS

1K views 5 replies 4 participants last post by  waltaz 
#1 ·
What do I need to convert a new P321 rear hub from an XD driver to a Shimano driver for SS use? I had thought this was an easy - and cheap - conversion, like Hope or DT Swiss, but am having trouble finding info on it.

Thanks for any info!


Sent from my iPad using Tapatalk
 
#4 ·
What do I need to convert a new P321 rear hub from an XD driver to a Shimano driver for SS use? I had thought this was an easy - and cheap - conversion, like Hope or DT Swiss, but am having trouble finding info on it.

Thanks for any info!

Sent from my iPad using Tapatalk
Problem solvers make a single speed sprockets for XD drivers for single speeding

Sent from my SM-G930F using Tapatalk
 
#6 ·
It's called the Zinger; I've got one with several cogs if you're interested. Never used, I'd let it go cheap.

Sent from my iPhone using Tapatalk
I found this online, and looked into it, but don't like it. Don't like those cheap, stamped cogs one bit, and the whole setup is too busy for me. Thanks, though!

Sent from my iPad using Tapatalk
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top