Mountain Bike Reviews Forum banner

2018 SS parts swap thread.

10K views 87 replies 32 participants last post by  LonelyDwarfProd. 
#1 · (Edited)
Old thread is 7 years old, hard to read, and mostly out of date. Let's start fresh.
 
#2 · (Edited)
Have:
21 tooth fixed disc cog 3/32 Problem Solvers brand. This turns any disc hub into a fixed gear hub!
Surly 3/32 21 tooth SS cog
Brand new Shimano Zee 36 tooth 104 bcd chainring
Truvativ Roleur 5 bolt 172.5 Crankset with BB for cross/road/fixie
Dark Cycles 104 BCD bashring silver/black with sweet old school flame cutouts
Cheap 1/8" fixed cog
MRP 104 Bashring silver kind of beat up but functional

PM for pics

Want:
Sweet bells that go ding-ding for my bikes
Frame Bags of different sizes
Quality mechanical disc brake set BB7 or similar/better
Front fork rear 135mm QR spaced non-offset
Whatcha got?
 
#10 · (Edited)
Have:
- BB7 brakes with gold Avid levers
- Various brake rotors
- Salsa Bell Lap 2 Drop Bars, 26 mm clamp
- 27.5x3.0 Nobby Nic, Pacestar compound. New in box.
- On One Fleegle Pro bars, polished


Want:
- Carbon rigid fork - either 27.5+ with ~420 A-C and QR axle or 29+ with ~510 A-C and 110x15 axle
- Front Road mechanical disc brake caliper OR drop bar front brake lever for V-brakes
-29er/700c disc front wheel
 
#12 ·
@FRS1661 - I have a Nashbar carbon fork that might fit your needs... 100mm, QR, 1 1/8" steerer 7.5" long, Axle to bottom of steerer measures at 475mm. Crazy light!

I also have:
Nashbar aluminum handlebars, not much sweep, 31.8mm dia., 720mm wide.
Deda Zero1 Stem, forged aluminum, 31.8mm dia., 110mm long, 8deg rise/drop.

I want:
Pedals with clips and platforms. Whatcha got?

-Tom
 
#20 ·
I managed to break part of the spider off this crankset, so you can't safely use 104 BCD rings on it. However, it's a 2x crankset so the small ring holes (64BCD?) are still fine. If you want a crankset that will only be used with a tiny ring, you can have these for a nominal price. Fat bike? Cargo bike?

No BB, 170mm arms, made for 68/73mm bottom brackets.

Silver Shadow
 
#35 ·
If anyone is in the UK I have the following for the cost of postage. Don't need anything currently but hope for good karma in return :D ?

Velosolo 32T ring. Really nice quality ring and very little use


KCNC Arrow Stem (90mm, -17, OS, little use) and Syntace F109 stem (110mm, +/-6, OS, little use)



Blackspire Stinger, can be used as a BB tensioner. Fitted and used in the workstand only.



2x CB cleats, new



Shock pump. Can be sent anonymously if you don't want to reveal you haven't MTFU and run rigid on your SS :D
 
#36 · (Edited)
Additions to the have list and clarification to my wants list:

Have:
- BB7 brakes with gold Avid levers
- Various brake rotors
- Salsa Bell Lap 2 Drop Bars, 26 mm clamp

- On One Fleegle Pro bars, polished 17* sweep, 660 wide, 25.4 clamp
- Bontrager Riser bar 750 wide x 15 mm rise. 9 deg sweep, 31.8 clamp


Want:
- Carbon rigid fork with ~420 A-C and QR axle
- Rigid fork: 29+ with ~510 A-C and 110x15 axle
- Front Road mechanical disc brake caliper OR drop bar front brake lever for V-brakes
- 29er/700c disc front wheel
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top