Pike 454 Uturn with Hope pro2. 2 issues- Mtbr.com
Results 1 to 9 of 9
  1. #1
    mjc
    mjc is offline

    Reputation:
    Join Date
    Apr 2006
    Posts
    17

    Pike 454 Uturn with Hope pro2. 2 issues

    I just installed a Pike Uturn with a Hope Pro2. The maxel hub qr seems to stop in the wrong place when the wheel is installed leaving the lever facing strait ahead...
    Also, I have a hayes 8 inch rotor- Even though I move the caliper ALL the way inbord, it still has major rub. On the previous fork-Fox Float RL 130 the caliper lined up right in the center.....

    Any suggestions for correction would be apreciated.

    Thanks

  2. #2
    mtbr member
    Reputation:
    Join Date
    Nov 2005
    Posts
    4,245
    Quote Originally Posted by mjc
    I just installed a Pike Uturn with a Hope Pro2. The maxel hub qr seems to stop in the wrong place when the wheel is installed leaving the lever facing strait ahead...
    Also, I have a hayes 8 inch rotor- Even though I move the caliper ALL the way inbord, it still has major rub. On the previous fork-Fox Float RL 130 the caliper lined up right in the center.....

    Any suggestions for correction would be apreciated.

    Thanks
    dissassembe it and rotate the lever 180 and put it back together.

  3. #3
    mtbr member
    Reputation:
    Join Date
    May 2004
    Posts
    8,227
    there is also a link to a pdf about being able to position it at any direction you want.
    i can email it to you if need be.
    as for teh caliper, take it to the lbs, or use spacers or something.

  4. #4
    melon farmer
    Reputation: marcus_dukakis's Avatar
    Join Date
    Apr 2005
    Posts
    567

  5. #5

    Reputation:
    Join Date
    Jun 2005
    Posts
    1,661
    pdf link no worky..

  6. #6

    Reputation:
    Join Date
    Jun 2005
    Posts
    1,661

  7. #7
    mtbr member
    Reputation:
    Join Date
    Apr 2006
    Posts
    142
    Quote Originally Posted by westin
    dissassembe it and rotate the lever 180 and put it back together.
    What he said

  8. #8
    EDR
    Reputation: eatdrinkride's Avatar
    Join Date
    Jun 2005
    Posts
    9,521
    I've got 8'' hayes rotor on my pike coil and i'm pretty sure I had to put some shims (errr...washers) on the mounts to get it set up right. I don't have it in front of me...get shims, fool around till you get it right. As far as the Maxel.....what everyone else said. Loosen the nut on the opposite end of the lever until you can flip the lever around 180 degrees, re-tighten.

  9. #9

    Reputation:
    Join Date
    Aug 2004
    Posts
    513
    You need the qr adapter for hayes brakes, not the 20mm one for the pike.

Members who have read this thread: 0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

THE SITE

ABOUT MTBR

VISIT US AT

© Copyright 2019 VerticalScope Inc. All rights reserved.