• 04-25-2015
    GPcruiser
    2 Attachment(s)
    Warbird 15 cable routing issues?
    Hi all,
    I've recently been putting some good mileage on my warbird. All in all its a really fun bike and i have been having a blast. I noticed something today while cleaning my bike that i need suggestions on. Cables rubbing frame down to bare metal in 2 spots. What can i use to remedy this? Should i just stop crying and keep pedaling?
    Attachment 983774Attachment 983775
  • 04-25-2015
    steinercat
    3M Clear tape.
  • 04-25-2015
    Volsung
    Yellow reflective tape!
  • 04-25-2015
    ATBScott
    Quote:

    Originally Posted by Volsung View Post
    Yellow reflective tape!

    Excellent! Just using a high-lighter might do the trick too! :o)
  • 04-26-2015
    Birdss
    I've put a lizard skin protective patch on my Salsa between the frame and cables.

    Maybe move the front brake cable outside of the jagwire cable so it's not rubbing the front of the heat tube.

    It something that happens on most bikes.
  • 04-30-2015
    Robg68
    I had the same problem on my Trek Crossrip. I used gorilla clear tape. Problem solved.


    My Bikes--2014 Trek Fuel 8-29er, 2014 Trek Crossrip Elite, 2015 Trek Farley 6.
  • 05-05-2015
    willapajames
    Don't worry 'bout it.
  • 05-11-2015
    PMC
    Quote:

    Originally Posted by steinercat View Post
    3M Clear tape.

    This ^^^
    The 3M Clear Paint Protector (same stuff used for 3M car bra) does the trick.
    Happens on most if not all bikes.