Ritchey 44mm Press Fit Headset for Reign- Mtbr.com
Results 1 to 2 of 2
  1. #1
    ...is still one gear
    Reputation: onetothepowerofn's Avatar
    Join Date
    Jan 2005
    Posts
    138

    Ritchey 44mm Press Fit Headset for Reign

    I purchased an 07 reign frame without headset recently. I know a lot of you use the Orbit Z from FSA. I can get a great deal on Ritchey products and was wondering whether the Ritchey WCS or Pro Press fit headsets would fit? Apparently these are only available in Europe - donīt ask me why. Specs are as follows (taken from the Ritcheylogic.com website):

    WCS Press Fit
    : Full complement angular contact cartridge bearings
    : Compatible with Campy style headtubes
    Stack Height : 12.9/18/25mm
    Cup Material : Alloy
    Headtube ID/depth : 44mm/9mm
    Bearings : Sealed Cartridge Stainless
    Weight : 110g (10mm)
    Availability = Europe Only

    Firstly, is there anyone out there who is using one of these successfully? If not, I believe the 44 ID is the critical dimension (not sure about the depth) - is there anything else I should check? Should it fit? Thanks in advance.
    Attached Images Attached Images

  2. #2
    mtbr member
    Reputation:
    Join Date
    May 2007
    Posts
    24
    it might work but i would be a little unsure about that because it doesnt press in very far. Giant makes adapters that you can use to put a normal headset in their head tubes, but i would get the FSA or a giant integraded

Members who have read this thread: 0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

THE SITE

ABOUT MTBR

VISIT US AT

© Copyright 2019 VerticalScope Inc. All rights reserved.