Just ordered the new Maverick decals...- Mtbr.com
Results 1 to 4 of 4
  1. #1
    mtbr member
    Reputation: Denis's Avatar
    Join Date
    Jan 2004

    Just ordered the new Maverick decals...

    Yeah, they are finally available. I should get them in a few days, will post an update and photos when I've put them on.

    In the mean time, here are a few pictures and instructions to put them on:

    Frame - White

    Frame - Black

    Fork - DUC32

    Fork - SC32


    Instructions for installing Maverick Decals:

    For Hard or Black Anodized Frames and Forks:

    To remove old decals on ANODIZED MATERIALS ONLY:
    -Use a commercially available paint stripper to remove old decals, careful to not touch anything other than the anodized surface. Do not use any abrasives to remove old decals.
    -You may notice a faint image of the old decal due to fading of the ano around it, this is normal.
    -Once old decal is removed clean surface with lacquer thinner, this is the best chemical for removing all of the residue in the rough surface of the anodization.
    -Use the faint image left over to place new decal into place.
    -Cut out individual decals needed, leaving as much of the surrounding material as possible.
    -Place clear side of decal down on a table, gently peeling up blue backing paper, leaving the decals on the clear film on table top. (peeling up clear side may leave decal stuck to 2 surfaces, not good)
    -Make sure to arrange decal position before placing into surface. Look twice, set once!
    -Press into place and rub down the clear film firmly with your thumb.
    -Gently peel clear film off, careful not to peel decal up with the clear film, hold edges down with finger while peeling up clear film.
    -Allow the decals to "cure" for 24hrs before washing or brushing bike and decals.
    ***Do not use any type of heat gun to "cure" you'll be sorry!***

    Newly Painted Frame or Fork:

    -See Maverick website for decal arrangements (frame/fork photos), or use you own personalized touch.
    -Place new decals over newly painted surface, make sure surface is lint and oil free.

    *Decals WILL NOT withstand extreme heat. Advise the paint shop to not use a clear powder coat finish over the decals and reheat.
    *Decals may only be clear coated with "wet" or “liquid” clear coat finish.

  2. #2
    Fortes Fortuna Iuvat
    Reputation: Datalogger's Avatar
    Join Date
    Jul 2008
    Thank god, these are long overdue!

    Thanks for the update Denis!
    Maverick Durance Ano-DUC32/C KING/XTR
    Mav ML8 Ano-DUC32/X0
    Mav ML8-DUC32/I9/XTR
    09 Spec. Demo-Totem-Ti DHX
    Norco Team DH

  3. #3
    mtbr member
    Reputation: ragetty's Avatar
    Join Date
    Jul 2006

    i can order these from maverick direct? - ANSWER: yes!

    has anyone (despite the warning in the instructions regarding heat) put these on a powder-coated frame? - ANSWER: they will go on the finished frame, but subsequent heat treatment is a no-go!

    thx, ragetty
    Last edited by ragetty; 07-06-2011 at 12:35 AM.

  4. #4
    rebmem rbtm
    Reputation: alex_sdca's Avatar
    Join Date
    Apr 2009
    The "durance" part looks too low key. Every other frame gets a cool M with upside down star pointed down logo.....
    I do like the rest though.

Members who have read this thread: 0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts




© Copyright 2020 VerticalScope Inc. All rights reserved.