Low temp wire for flexibility when winter riding- Mtbr.com
Results 1 to 5 of 5
  1. #1
    mtbr member
    Reputation:
    Join Date
    Sep 2014
    Posts
    249

    Low temp wire for flexibility when winter riding

    Does anybody have a recommendation on a wire that works well in the winter down to about -10F or -23C?

    Looking for something that will stay flexible and carry enough current for modest light output, such as for a 2 emitter light. 2 conductor wire would be nice, but when I've looked for that it was quite expensive.

    So far Pomona test lead wire with silicone insulation looks like an option, but I'm guessing you folks have found something more convenient.

  2. #2
    mtbr member
    Reputation:
    Join Date
    May 2005
    Posts
    3,829
    I use a cable used for industrial sensors. It has a urethane jacket that stay pretty flexible when cold though I have never tried it at temps as low as you are looking for. Silicone insulation will be the best for those temps. I've seen a 2 conductor with silicone insulation used on RC cars. It is a paired cord like appliance "zip" cord rather than jacketed and had a red and black color. I think it was at Hobbyking but a quick Google turned up this...

    https://powerwerx.com/red-black-bond...frwvfgod-bognq
    GoPro adapters for bike lights http://www.pacifier.com/~kevinb/index.html

  3. #3
    mtbr member
    Reputation:
    Join Date
    Sep 2014
    Posts
    249
    Thanks for the hobby king tip,

    Yes, they have several gauges and colors available there. there's a category for Silicon wire (as they put it, sounds like fiber optic) under the Hardware and Accessories section.

    Turnigy High Quality 20AWG Silicone Wire 1m (Black) (US Warehouse)

    I can make an excuse to include some of this with an order from that place.

    People who buy this wire are mad that it comes pre-cut to 1m length, but that shouldn't be too much of a problem for bike light battery connections.

    I'll try to remember to update this post with results sometime in December.

  4. #4
    mtbr member
    Reputation: milliesand's Avatar
    Join Date
    Jun 2015
    Posts
    460
    In my other hobby, people use Vacuum cleaner wire (replacement powercord or salvage from home ) as it remains flexible while very cold. Easy to find locally, cheap, works.

  5. #5
    mtbr member
    Reputation:
    Join Date
    Nov 2010
    Posts
    27

Similar Threads

  1. Help with wire routing for SLX m671 front derailleur bottom pull wire routing.
    By taskemann in forum Drivetrain - shifters, derailleurs, cranks
    Replies: 2
    Last Post: 07-30-2016, 09:29 AM
  2. Replies: 13
    Last Post: 12-19-2015, 06:50 PM
  3. Replies: 58
    Last Post: 07-19-2015, 09:08 AM
  4. Replies: 2
    Last Post: 02-19-2013, 07:52 PM
  5. Saddles and flexibility
    By toddre in forum General Discussion
    Replies: 7
    Last Post: 03-02-2012, 12:15 PM

Members who have read this thread: 0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

THE SITE

ABOUT MTBR

VISIT US AT

© Copyright 2020 VerticalScope Inc. All rights reserved.