Results 1 to 3 of 3

Thread: DIY Diffuser?

  1. #1
    mtbr member
    Reputation:
    Join Date
    Feb 2006
    Posts
    43

    New question here. DIY Diffuser?

    I've got a Niterider Pro 1500 I've been using on my handlebars with a Magicshine MJ900 on my helmet. I'm pretty happy with the MJ900 on my helmet to handle the spot light duties, but I'd like to widen out the beam on the Niterider a bit to give me more of a flood light. Does anyone have any suggestions about how I might go about that?

  2. #2
    X83
    X83 is offline
    mtbr member
    Reputation:
    Join Date
    May 2018
    Posts
    27
    I'd take the light apart and measure the lens then find a suitable replacement stripe type lens to widen the beam pattern.

    Here a good source for lenses after you find the correct size. https://www.aliexpress.com/store/all...190226e8iNwg92

    https://www.action-led-lights.com/co...ics-reflectors
    Last edited by X83; 11-13-2018 at 02:02 PM.

  3. #3
    Action LED Lights
    Reputation: Action LED Lights's Avatar
    Join Date
    Nov 2011
    Posts
    615
    Quote Originally Posted by X83 View Post
    I'd take the light apart and measure the lens then find a suitable replacement stripe type lens to widen the beam pattern.

    Here a good source for lenses after you find the correct size. https://www.aliexpress.com/store/all...190226e8iNwg92

    https://www.action-led-lights.com/co...ics-reflectors
    Our wide angle lens is 39mm in diameter but can always be cut down to fit your light since is looks like it's smaller. You can either replace your current cover lens or use some small spots or glue and attach it on the inside or outside. For lights with a lens greater than 39mm you can still attach it to your current lens and it will spread all the light that hits it.
    Jim Harger
    Action LED Lights
    www.action-led-lights.com

Similar Threads

  1. Betty R with Diffuser (Bar Mount)
    By stu06 in forum Lights and Night Riding
    Replies: 0
    Last Post: 12-19-2014, 08:49 PM
  2. Flip down diffuser
    By DIYtailight in forum Lights DIY - Do It Yourself
    Replies: 1
    Last Post: 11-13-2011, 07:56 PM
  3. Diy
    By fused in forum Shocks and Suspension
    Replies: 15
    Last Post: 01-07-2011, 09:37 AM
  4. What DIY voltage regulator for DIY lights
    By dmalovic in forum Lights DIY - Do It Yourself
    Replies: 9
    Last Post: 11-29-2005, 11:17 AM
  5. Paging Homebrew (and other DIY lighting nuts): DIY Battery Pack question
    By glenzx in forum Riding Passion and Stories
    Replies: 18
    Last Post: 10-14-2005, 11:50 AM

Members who have read this thread: 39

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

THE SITE

ABOUT MTBR

VISIT US AT

© Copyright 2019 VerticalScope Inc. All rights reserved.