battery question for 1st light build- Mtbr.com
Results 1 to 2 of 2
  1. #1
    mtbr member
    Reputation:
    Join Date
    Mar 2007
    Posts
    1

    battery question for 1st light build

    I'm attempting my first light build and am using a 3 xpg star. I hope u guys can help me with battery advice. I want to make a dependable, easy connecting, quick charge system. First, if the led is pushed at a max of 1500ma and using 4 x 2400ma batteries, I roughly get a run time like 2400ma x 4 / 1500ma x 3 = 2.13 hours? Second, any thoughts on Nimh vs LiFePO4 batteries. Third, I want to recharge the batteries in the case I put them in. Can anyone recommend a quick charger using some type of quick connector so that I can charge the batteries on the bike. Thanks in advance for helping me get started. This is the light I plan on building, http://www.instructables.com/id/Impr...ht-with-integ/ I'm substituting 3 xpgs for the endor star. Just curious if the battery pack indicated is sufficient for 2 hours run time.
    Last edited by gitdirty; 12-19-2010 at 08:43 PM.

  2. #2
    mtbr member
    Reputation:
    Join Date
    Dec 2007
    Posts
    145
    You've missed out some factors .......have a look here

Members who have read this thread: 0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

THE SITE

ABOUT MTBR

VISIT US AT

© Copyright 2020 VerticalScope Inc. All rights reserved.