Ripley LS V3 owners-
Results 1 to 3 of 3
  1. #1
    mtbr member
    Join Date
    Jul 2011

    Ripley LS V3 owners

    Just wondering if you can do me a favor.

    Measure the distance between the crank and chainstays on both sides at ~the middle of the pedal hole.

    Please include your crank length. Just curious if on a stock crank set up that distance is the same side to side.

    The rear chainstay to BB doesn't look to be symmetrical.

    I've got SiSl2 cranks and when set up with a good chain line the drive side is a little further from the CS than the non-ds.

    Ripley LS v3
    OG Ripley v2 handed down to son

  2. #2
    mtbr member
    Join Date
    Jul 2006
    I just checked on my bike.

    If there's any difference, it's very small, like maybe 1 or 2mm at most. Hard to say exactly because there are boots over the crank-ends which interfere with the calipers doing a precise measurement.

    See photos below. I have 170mm cranks and the gap between the crank and chain-stay was about 5mm on the drive side and maybe 6-7 on the non-drive side.
    Attached Thumbnails Attached Thumbnails Ripley LS V3 owners-img_20200402_184903.jpg  

    Ripley LS V3 owners-img_20200402_184914.jpg  

  3. #3
    mtbr member
    Join Date
    Jul 2011
    Thanks, installing the cranks based on BB measurements I get a little over 5 Non-DS on one side and 10 on the DS.
    Ripley LS v3
    OG Ripley v2 handed down to son

Similar Threads

  1. Ripley LS V3 dropper post length
    By glader60 in forum Ibis
    Replies: 2
    Last Post: 12-07-2019, 02:39 PM
  2. Ripley LS V3 vs. Ripmo
    By socaltrailrider in forum Ibis
    Replies: 21
    Last Post: 10-02-2018, 05:50 PM
  3. Replies: 40
    Last Post: 08-05-2018, 01:17 PM
  4. Hows the Ripley LS V3?
    By hosercom in forum Ibis
    Replies: 47
    Last Post: 10-18-2017, 09:57 AM
  5. Ripley LS v3 Build Up - Steerer Length
    By bremmick in forum Ibis
    Replies: 10
    Last Post: 10-07-2017, 08:07 AM

Members who have read this thread: 34

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts




© Copyright 2020 VerticalScope Inc. All rights reserved.