ML and E13 crank no match- Mtbr.com
Results 1 to 9 of 9
  1. #1
    mtbr member
    Reputation:
    Join Date
    Apr 2005
    Posts
    82

    ML and E13 crank no match

    Just wanna let you know that the Moonlander and the E13 crank do not match.
    The crank arm on the non drive side hits the chain stay. I tried maximum spacers, but it still hits it. A bit of a downer as this crankset set be back a few $$..
    I was aiming for a single ring setup with a full chain guide.
    Oh well, back to the drawing board.

  2. #2
    mtbr member
    Reputation:
    Join Date
    Apr 2008
    Posts
    2,516
    I've see e13's for sale online, and a few sites said that they were incompatible with the Moonlander. Looks like there's a Mr. Whirly in your future.
    Jason
    Disclaimer: www.paramountfargo.com

  3. #3
    mtbr member
    Reputation: kreater's Avatar
    Join Date
    Nov 2004
    Posts
    783
    i'm in the process of building a ML as well. i did't want to run the the whirley cranks so i though i would try the FSA Fatback cranks. so far so good they clear the chain stays and since i am running the ML as a 1/10 and 4in tires looks like things will clear. not sure if it would work with BFL tires though. oh and rolling D rims.
    Attached Thumbnails Attached Thumbnails ML and E13 crank no match-ml-1.jpg  

    ML and E13 crank no match-ml-2.jpg  

    "Live dangerously and you live right."
    Johann Wolfgang von Goethe

  4. #4
    mtbr member
    Reputation: HDTVdevil's Avatar
    Join Date
    Nov 2011
    Posts
    296
    Are there any cranks that are known not fit on mukluk Ti frame?

    Sent from my GT-I9100 using Tapatalk

  5. #5
    mtbr member
    Reputation: kreater's Avatar
    Join Date
    Nov 2004
    Posts
    783
    don't know about fit on the salsa. so far looking good for the ML
    "Live dangerously and you live right."
    Johann Wolfgang von Goethe

  6. #6
    mtbr member
    Reputation:
    Join Date
    Aug 2012
    Posts
    65
    which e*13 crank? i was thinking of the xcx+ single/double crank:

  7. #7
    mtbr member
    Reputation:
    Join Date
    Aug 2012
    Posts
    65
    i have been thinking about chain/tire clearance, and going to use the outside tabs if i had to. i'm planning on setting the moonlander up 1x10, and i thought the e*13 crank would work?????

  8. #8
    mtbr member
    Reputation:
    Join Date
    Aug 2012
    Posts
    65

  9. #9
    mtbr member
    Reputation: thesilversurfer's Avatar
    Join Date
    Oct 2011
    Posts
    264
    When Pete built my Fatback this year he recommended the FSA Fatback cranks as they are wider than then the E13's. Awesome cranks, I highly recommend them.

Members who have read this thread: 0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

THE SITE

ABOUT MTBR

VISIT US AT

© Copyright 2019 VerticalScope Inc. All rights reserved.