Glory owners with saint cranks- Mtbr.com
Results 1 to 5 of 5
  1. #1
    yaha ha
    Reputation: snowforner15's Avatar
    Join Date
    Oct 2006
    Posts
    586

    Glory owners with saint cranks

    I bought some used cranks for my 06 glory.
    How many BB cup spacers do i use and which side?
    Thanks

  2. #2
    mtbr member
    Reputation:
    Join Date
    Mar 2007
    Posts
    170
    how much were your cranks

  3. #3
    mtbr member
    Reputation: ScBullitFr3rider's Avatar
    Join Date
    Sep 2007
    Posts
    141
    Quote Originally Posted by snowforner15
    I bought some used cranks for my 06 glory.
    How many BB cup spacers do i use and which side?
    Thanks

    maybe one or two on the drive side to get the desired chainline, you're gonna have to take it on and off and experiment with # of spacers seeing as you probaly dont have a manual since they're used. 3 spacers might be too much because your spindle is only so long and it might not be long enough for you to thread the endcap on the non-drive side. You might also have to play with the spacing of your chainguide if you run into alignment problems.

    Good Luck, it can be a pain, but they're really nice cranks, easiest to setup out of the External BB bunch.

  4. #4
    Meh.
    Reputation: XSL_WiLL's Avatar
    Join Date
    Nov 2004
    Posts
    17,508
    You did get the 83mm model, right?

    Instructions should be on the Shimano website.

  5. #5
    yaha ha
    Reputation: snowforner15's Avatar
    Join Date
    Oct 2006
    Posts
    586
    ya made sure of 83mm

    and to answer the question they were $$160 used once..

Members who have read this thread: 0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

THE SITE

ABOUT MTBR

VISIT US AT

© Copyright 2019 VerticalScope Inc. All rights reserved.