EVO rockers- Mtbr.com
Results 1 to 6 of 6

Thread: EVO rockers

  1. #1
    yarrrp
    Reputation:
    Join Date
    May 2007
    Posts
    178

    EVO rockers

    SO...there are two different rockers now for the EVO. The ones for the freeride are the OG rockers and you have some newish nifty ones for the other evo? Do they lower the BB and slack it out? Explain please.

  2. #2

    Reputation:
    Join Date
    Jul 2004
    Posts
    117
    They're the same geo except the Taiwan ones have double bearings in the back also.

  3. #3
    mtbr member
    Reputation:
    Join Date
    Oct 2007
    Posts
    6
    So the dual bearing rockers will fit any Evo? Because one of the rear bearings is loose in the rocker and its rubbing the seat stays. Poor press fit of bearing I would guess.

  4. #4
    yarrrp
    Reputation:
    Join Date
    May 2007
    Posts
    178
    Tighten your bolts

  5. #5
    mtbr member
    Reputation:
    Join Date
    Oct 2007
    Posts
    6

    Come on!!

    The bolt isn't loose. The bearing is loose in the rocker. It looks like when is was pressed in it was a little crooked and removed some of the material in the press fit. The rocker can be moved in and out about a 1/16th of an inch. You can disassemble rocker and pull the bearing out with your fingers.

  6. #6
    Is this thing on?
    Reputation: Bradfly85's Avatar
    Join Date
    Apr 2007
    Posts
    49
    The best thing to do is email Brian, Alan, or any of the guys at Chumba and I feel more than confident they will help to resolve any issue you may be having.
    Or even just call them!
    [[/B][/FONT]

Members who have read this thread: 0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

THE SITE

ABOUT MTBR

VISIT US AT

© Copyright 2019 VerticalScope Inc. All rights reserved.