Paul Word Hub and 6 speed freewheel?-
Results 1 to 6 of 6
  1. #1
    Did I catch a niner+?
    Reputation: Mr Pink57's Avatar
    Join Date
    Jul 2009

    Paul Word Hub and 6 speed freewheel? : Shimano 6-Speed Tourney Bicycle Freewheel Replacement Cluster - MF-TZ : Bike Cassettes And Freewheels : Sports & Outdoors

    Hey guys looking to put this on my commuter, I do not need 9, 10, or 11 speeds on this bike. It has a 36x16 on it now and it would benice to have a small range and a nice bailout gear.

    Is this going to work on a Paul WORD freewheel hub? I assume the wheel will have to be slightly redished? Or is there even enough threads on a hub like this for it to work?

    The 6 speed is nice but if I can do the 7 speed I will, the ratios are more inline at 14,16,18,20,22,24, and 34.

    Mr. Krabs: Is it true, Squidward? Is it hilarious?

  2. #2
    mtbr member
    Reputation: newfangled's Avatar
    Join Date
    Sep 2010
    Have you tried contacting Paul directly? I think they'd know better than anyone...and I'd trust them more than random internet weirdos.

    But speaking as a random internet weirdo, I think the issue wouldn't be the threading so much as the hub spacing. If it's already a 135mm hub it's going to be too wide with a multispeed freewheel on there. 6speed hubs normally have that 1" of extra axle spacers sticking out on the driveside. (I think, but I really have no idea)

  3. #3
    mtbr member
    Reputation: rogbie's Avatar
    Join Date
    Jun 2011
    I would guess there isn't enough room to put a cassette on there. Contacting Paul Comp. is the way to get the best answer.

    Personally, I run a 20t White Ind. Eno freewheel, Paul Comp. Melvin chain tensioner and a 24x36x44t triple. A similar set-up might work for you. The White Ind. freewheel is pricey, but worth the cost because they're serviceable.

  4. #4
    jrm is online now
    mtbr member
    Reputation: jrm's Avatar
    Join Date
    Jan 2004
    To do that you need to go with a bmx cassette hub.

  5. #5
    mtbr member
    Join Date
    Apr 2012
    If you need a bailout gear, you could get a WI Dos ENO and a double crankset. As long as the chainrings are 2 teeth apart, you don't need a different chain, and changing ratios is as easy in most cases as just loosening the RH bolt on the rear wheel and flipping the chain over.

    It is an incredibly expensive way to get a bailout gear, for sure...

  6. #6
    mtbr member
    Reputation: BrianMc's Avatar
    Join Date
    Jan 2010
    I used one for a while on the errand bike with an old Shimano hub and decided to go 1 x 9 and switched from 27" to 700C. But I am no longer the powerhouse I once was so I liked the gears between with a 42 chain ring.

Similar Threads

  1. 7 speed bike with 8 speed freewheel?
    By Ecurb_ATX840 in forum Drivetrain - shifters, derailleurs, cranks
    Replies: 3
    Last Post: 07-15-2014, 02:43 PM
  2. 8 speed freewheel with 9 speed chainring
    By BigDriveLittleWedge in forum Singlespeed
    Replies: 1
    Last Post: 03-17-2014, 08:05 PM
  3. Replies: 0
    Last Post: 11-29-2013, 12:14 AM
  4. Replies: 1
    Last Post: 10-30-2013, 01:53 PM
  5. Using disc side of Paul Word SS hub for fixed gear?
    By TwigJumper in forum Singlespeed
    Replies: 11
    Last Post: 04-13-2012, 04:08 PM

Members who have read this thread: 0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts




© Copyright 2020 VerticalScope Inc. All rights reserved.