• 10-10-2009
    lanpope
    1 1/4" to 2" Adapter for T2 - Anyone using one?
    I have a 1 1/4" receiver hitch and a T2 for my Subaru Outback. Buying a truck next week and was wondering if anyone is using an adapter to make their 1 1/4" rack work on a 2" receiver? What's your setup?

    Keeping the Subaru, so it would be nice to be able to use the rack on either vehicle.

    Is the connection secure? What about rattling and bouncing?

    Thanks,

    LP
  • 10-11-2009
    Rock
    Adapters work
    Like this one.

    http://www.etrailer.com/pc-HA~HT02.htm

    I use this type when using my rack on my wifes MDX. It wobbles alittle more than just one connection, but you can buy a locking bolt to tighten it up. The main movement is up and down, not side to side.

    Rock
  • 10-11-2009
    longman
    http://www.thuleracks.com/product_sp..._id=49&sku=912

    you need part B for $24.50. You will need to cut it so the hole lines up with the hole on your T2 tongue but it's aluminum and really easy to cut. I use one for my 1.25" T2 when it goes in my friends 2" hitch receiver. There'e no rattling around as you use the original hitch bolt that you got with the T2.
  • 10-11-2009
    lanpope
    Quote:

    Originally Posted by longman

    Now that is what I am talking about. Great info!

    Thanks,

    LP