Results 1 to 10 of 10
  1. #1
    mtbr member
    Reputation:
    Join Date
    Sep 2011
    Posts
    9

    chainrings for hollowgram sl cranks

    I need some suggestions on chainrings. I have been running a 2x9 setup but I am not satisfied with it. I recently brought a new 4 bolt triple spider for my cranks, but need some suggestions on what chain rings to choose. I am currently looking at middle burn and race face chainrings so I can run 3x9.
    Thanks

  2. #2
    mtbr member
    Reputation:
    Join Date
    Mar 2007
    Posts
    106

    holowgram

    i mounted these in 38/24 on my scalpel 29crb
    not expensive and works very good

    ZORLONI S.N.C. di Paolo e Sergio Zorloni

  3. #3
    mtbr member
    Reputation:
    Join Date
    Feb 2012
    Posts
    87
    how about a set of xt ones, keep seeing them on ebay for about 50 brand new, i'm using the fsa ones that came with my triple hollowgram, theyre ok in the dry but get a bit of mud round them and they tend to keep hold of the chain and either wont shift well or worse they suck the chain up into the chainstay,

  4. #4
    mtbr member
    Reputation:
    Join Date
    Dec 2006
    Posts
    117
    is this about the 2012 hollowgram crankset ?
    diameter 80/120 ?
    i love this one but i need smaller ring than 26 on my scalpel 29....

  5. #5
    Unstable Corruption
    Reputation: 0xDEADBEEF's Avatar
    Join Date
    Oct 2011
    Posts
    18

    chainrings for hollowgram sl cranks

    Greetings to hollowgram experts.
    Cannot post my own topic yet.

    I've got Hollowgrams with 39/26 XX rings and 120 bcd spider.
    I want to make it 36/22.
    So i need to buy a new 104BCD spider with new chainrings?
    will BOR LK 104/64 spider do the job?

  6. #6
    mtbr member
    Reputation:
    Join Date
    Aug 2006
    Posts
    410
    yes it will. BOR also make a range of 120bcd - 80bcd rings, but i'm not too sure if they do 36/22. they are very good rings

  7. #7
    Unstable Corruption
    Reputation: 0xDEADBEEF's Avatar
    Join Date
    Oct 2011
    Posts
    18

    chainrings for hollowgram sl cranks

    Thanks!
    it's 25T minimum with 120 BCD, not enough for me.
    And what about the tools i'll need to replace the spider?
    i need spider tool, and a new lockring? or may be i can re-use existing one?

  8. #8
    mtbr member
    Reputation:
    Join Date
    Aug 2006
    Posts
    410
    25t, i guessed 22t might be too small.

    if you already have the crank removal tool KT013 - yeah just the spider tool, you can certainly re use the lock ring. and apply some loctite 242, (i think)??? pdf guides are available on c'dale website.

    good luck.

  9. #9
    mtbr member
    Reputation:
    Join Date
    Aug 2006
    Posts
    410
    yes, loctite 242!

  10. #10
    Unstable Corruption
    Reputation: 0xDEADBEEF's Avatar
    Join Date
    Oct 2011
    Posts
    18

    chainrings for hollowgram sl cranks

    thank you for your answers)

Members who have read this thread: 0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

THE SITE

ABOUT MTBR

VISIT US AT

© Copyright 2019 VerticalScope Inc. All rights reserved.