Fox Launch "Sport" knee pad hack?? WTF?- Mtbr.com
Results 1 to 2 of 2
  1. #1
    mtbr member
    Reputation:
    Join Date
    Mar 2017
    Posts
    237

    Fox Launch "Sport" knee pad hack?? WTF?

    Just ordered a pair of $28 Fox knee/shin pads (https://www.amazon.com/FOX-Launch-Sp...ch+knee+guards)

    It's a lot of material for the price, but--wow, these things seem completely useless?? With the straps "tight but comfortable" and the pad centered on the knee, every time I flex my knee the pad inches downward until it's halfway off the knee (takes about 3-5 knee bends). There's almost no flex in the hinge between the knee and shin--it's a single piece of foam on the inside from top to bottom, and the the 2 separate plastic guards on the outside are connected with beefy, inelastic straps.

    They didn't even try to make the things flexible--it's just a shin guard that goes up past your knee, with a top strap on the thigh that will hopefully keep it aligned with your knee in a perfectly aligned frontal impact.

    Has anyone tried to modify these to give them more flex? I doubt I could sew through the foam, but if I were to slice the foam below the knee (creating 2 pieces, a knee section and shin section), could I use some kind of caulk or glue (or heat) to seal the cut edges?

    Or can they be sewn to the bottom of a pair of shorts to help anchor them?

    Or do they get much less stiff once broken in?

    I don't get it. Seems unusable as is. I welcome any input. Maybe I'm bending my knees wrong.

  2. #2
    mtbr member
    Reputation:
    Join Date
    Mar 2017
    Posts
    20
    I've used these but they look a little bit different mine don't have the above knee strap. Yeah theyre loose and slide around I wouldn't want to use them too often. Probably good over pants though.

Similar Threads

  1. Fox Launch Pro vs Launch Enduro Knee Pads
    By osbaldo in forum Apparel and Protection
    Replies: 8
    Last Post: 12-25-2015, 05:18 AM
  2. "If I was just wearing knee pads...." *Mildly Gross Pics*
    By fastslowpronewb in forum Rider Down, injuries and recovery
    Replies: 13
    Last Post: 02-12-2015, 03:25 PM
  3. Any good comparisons between 1X11 and the "hack" 1X10 setups?
    By jdee2wheels in forum Drivetrain - shifters, derailleurs, cranks
    Replies: 27
    Last Post: 11-15-2014, 03:25 PM
  4. Bike mag XX1 "hack"
    By Jisch in forum Fat bikes
    Replies: 68
    Last Post: 02-05-2014, 09:03 AM
  5. Replies: 7
    Last Post: 06-04-2011, 07:35 AM

Members who have read this thread: 0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

THE SITE

ABOUT MTBR

VISIT US AT

© Copyright 2020 VerticalScope Inc. All rights reserved.