Im servicing an older Rock shox fork and went in to tighten the plunger bolt down into the lower tube and the bolt snapped in the lower tube left prob 100% of the bolt in the thread. i found the service torque to be 14ftlbs which seem like alot for such a small bolt into aluminum.but kept turning like an idiot and snapola. my question is has anyone had success trying to drill it out retapping or drilling and extracting or does the piece at the bottom of the lower tube come out cause it has 2 small holes in the side of it like theres maybe get a tool in there and turn it out or is it pressed into the bottom of the tube. Any help appreciate it