• 08-18-2010
    biggearss
    Voodoo Canzo 29er Bushings
    Anyone know where or how to get new rear bushing for a Voodoo Canzo? I have tried contacting Voodoo a number of times and have not heard a word back. Love the bike and would like to get it going again.
  • 08-18-2010
    hsakkire
    You can find all that you need in my response to this post. Mtnbiker4life can help

    http://forums.mtbr.com/showthread.php?t=640372
  • 08-18-2010
    biggearss
    I am actually looking for information on the bushing where the seat stay and chain stays meet.
  • 08-20-2010
    thomllama
    try http://www.enduroforkseals.com - (realworldcycling, same place) they have all kinds of bearing and can get you what you need...

    If you look on the black seal there should be a # there you can use to reference what you need for a replacement.

    you will need a press to get them out and new ones back in.

    other option is if they aren't that bad you can just clean them and re-grease.. take a pick or a pin and just softly peel back the seal from the outer edge, I use a thin oil over a degreaser to clean (I use tri-flow) hit it with a air blast then pack in grease. reassemble and go for a few rides. I usually go back and pack it with more grease after a few rides to make sure it's really loaded and everything is covered...
  • 08-22-2010
    biggearss
    Still not what I am looking for. I need a rear pivot bushing.
  • 08-25-2010
    thomllama
    Quote:

    Originally Posted by biggearss
    Still not what I am looking for. I need a rear pivot bushing.

    what bushing? where on the bike?

    pictures help!! ;)
  • 08-26-2010
    Duzitall
    He needs the little clear plastic ones. biggearss, how have you tried to contact Voodoo? They always answered me via email.
  • 08-30-2010
    biggearss
    4 Attachment(s)
    I have tried email. even from two different accounts thinking one may have gone to spam. They were always good about answering when I first bought the bike.

    I have attached a few pictures showing the pivot that needs repair and the part I am looking for.
  • 08-31-2010
    biggearss
    Quote:

    Originally Posted by thomllama
    what bushing? where on the bike?

    pictures help!! ;)


    I uploaded some pictures
  • 08-31-2010
    thomllama
    try BTI, they are the distributor for voodoo...

    https://www.bti-usa.com/
  • 08-31-2010
    boomn
    Quote:

    Originally Posted by thomllama
    try BTI, they are the distributor for voodoo...

    https://www.bti-usa.com/

    actually they are Voodoo. Aynway, they would definitely be the best place to start
  • 11-23-2017
    gdyeags
    Did you ever find this?