Note: The proceeds from this sale will benefit my 2017 Dana-Farber Marathon Challenge (DFMC) fundraising effort. I'm running my 8th and final Boston Marathon with the DFMC. 100% of the purchase price goes to the DFMC and 100% of that goes directly to cancer research. There are no administration costs whatsoever. To date, through previous bike parts sales I have donated $1750. Last year I raised $9176 and I'm hoping to beat that amount this year.

Tomii #33. 650B/27.5 mountain bike frame. TIG welded. This frame has fewer than 100 miles. Itís in excellent condition though will need paint due to the addition of the cable guide braze-ons I had installed. Initially this was a single speed and sent it back to Nao for the conversion. Never got around to sending it to Jordan Low so it awaits your creative interpretation.

Here are the specs:


  • Head Tube Length: 100mm
  • Head Tube Diameter: 44mm
  • Effective Top Tube Length: 605mm
  • Seat Tube Length (center-to-top): 17.5 inches
  • Seat Tube Length (center-to-center): 15.5 inches
  • Seat Post Diameter: 27.2
  • Saddle Height: 741mm
  • Dropouts: Paragon Sliding
  • Chainstay Measurement: 415mm (somewhere around there for the sliders)
  • Head Tube Angle: 69.5 degrees
  • Seat Tube Angle: 73 degrees
  • Bottom Bracket Width: 73mm, threaded
  • Bottom Bracket Height: 12"
  • Fork Axle-to-Crown: 470mm (suspension corrected designed for ENVE MTN fork)
  • Max Tire Size: 2.4"





$750/bo. Flexible on price as itís going to need paint, which would be around, say, $400.

You can see current pictures here and here.

You can see naked pictures here, here, here, here and here.

Entire thread here.