Okay, I've been through the manuals and they don't cover replacement of the bearings - either the smaller ones in the yoke, the small inner-ones on the switch, or the large radius switch bearing and bushing.
So, I'm thinking the standard press-out for the small ones should work (touchier since I have limited equipment) but I am really left wondering how to tackle the large radius bearings on the Switch.
So, if anyone has any technique to share that'd be appreciated. Would save me the ultimate fall back of driving 90 minutes to Bethlehem PA to connect with a good Yeti shop that can probably help out.
Cheers!
So, I'm thinking the standard press-out for the small ones should work (touchier since I have limited equipment) but I am really left wondering how to tackle the large radius bearings on the Switch.
So, if anyone has any technique to share that'd be appreciated. Would save me the ultimate fall back of driving 90 minutes to Bethlehem PA to connect with a good Yeti shop that can probably help out.
Cheers!