Results 1 to 4 of 4

Thread: ASX 6 to 7

  1. #1
    mtbr member
    Reputation:
    Join Date
    Jan 2006
    Posts
    184

    ASX 6 to 7

    Do I really need the tool from yeti to switch out the dogbone from 7in to 6inch or is
    there another way around it?

  2. #2
    mtbr member
    Reputation:
    Join Date
    Sep 2004
    Posts
    118
    Quote Originally Posted by Doro
    Do I really need the tool from yeti to switch out the dogbone from 7in to 6inch or is
    there another way around it?
    No, you don't. Metric hex driver or universal bike tool will be OK.

  3. #3
    mtbr member
    Reputation:
    Join Date
    Jan 2006
    Posts
    184
    how do you get the bushing out then? I can unscrew one side but the bushing stays in and I cant get it out!

  4. #4
    Stray Bullet
    Reputation: Nagaredama's Avatar
    Join Date
    Aug 2004
    Posts
    2,258
    Quote Originally Posted by Doro
    how do you get the bushing out then? I can unscrew one side but the bushing stays in and I cant get it out!
    There really isn't a bushing holding it in. Just the bolts that screw together. Use a small allen wrench to push the female bolt out.

    You only need the tool to remove the bearing on the shuttle.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •