Page 5 of 9 FirstFirst 123456789 LastLast
Results 201 to 250 of 430
  1. #201
    Snapper
    Reputation: johnd663's Avatar
    Join Date
    Jun 2007
    Posts
    489

    not getting the love

    Hi

    i have gone from the last 6 years on 29ers to a Yeti 5A and it has been a steep relearning curve.

    I am 6.5 and 100kgs on a XL frame with 130mm floats and I cant seem to get used to the slack head angle. i cant drop the forks as i get helps of pedal strikes as it is. It is simply the fact that due to my size (big bloke size) I need to run a longer stem and riser bars to get the right position. This position works great for XC bike and 29ers but this yeti strikes me as a real trail bike. Might try a short stem and really wide bars (similar reach- but improve leverage) - but this will hamper climbing.

    I just havent got the cockpit sorted - perhaps over thinking it and because i am a big bloke = need to make do.

    anyone else found the relaxed angles on the 5 requires different setup?

    i only have the one bike so dont want to limit its ability or all round goodness.

  2. #202
    > /dev/null 2&>1
    Reputation: Procter's Avatar
    Join Date
    Feb 2012
    Posts
    3,425
    @ 130mm fork you'll probably be at 67.5 or so? You may get used to it quicker than you think. How many miles have you put in?

    What is your lower cup on your headset? I think it needs to be EC44/40, but you might be able to find a lower cup with the shortest stack possible. Other than that, besides going to a 120mm (which you don't want to do because of pedal strikes) not sure what you can do.

  3. #203
    Snapper
    Reputation: johnd663's Avatar
    Join Date
    Jun 2007
    Posts
    489
    Quote Originally Posted by ddprocter View Post
    @ 130mm fork you'll probably be at 67.5 or so? You may get used to it quicker than you think. How many miles have you put in?

    What is your lower cup on your headset? I think it needs to be EC44/40, but you might be able to find a lower cup with the shortest stack possible. Other than that, besides going to a 120mm (which you don't want to do because of pedal strikes) not sure what you can do.
    I hated it at first but we have been getting along alot better.

    probably around 600 kms or 10 hours a week for 4 months

    it is my one bike so it has been ridden at bike parks, all mountain stuff and prodominately fast groomed XC trails. It is perfect for the rough stuff and more than capable but lacks something in the XC general riding. perhaps i could install an angle headset and steepen the angle a touch.
    Perhaps it is not the right bike for me or it is such a leap from 29ers

  4. #204
    mtbr member
    Reputation:
    Join Date
    May 2010
    Posts
    14
    Quote Originally Posted by ddprocter View Post
    @ 130mm fork you'll probably be at 67.5 or so? You may get used to it quicker than you think. How many miles have you put in?

    What is your lower cup on your headset? I think it needs to be EC44/40, but you might be able to find a lower cup with the shortest stack possible. Other than that, besides going to a 120mm (which you don't want to do because of pedal strikes) not sure what you can do.
    headtube for ASR-5 is i.d 34mm on top headtube and i.d 49.6mm on low headtube , mine is 2012 asr-5

  5. #205
    > /dev/null 2&>1
    Reputation: Procter's Avatar
    Join Date
    Feb 2012
    Posts
    3,425
    Thanks lschen

    So I guess a working angleset would be this Works EC34/EC49 (coincidentally, it says for yeti asr), with 1.0 degree adjustment. That's pretty steep though (you'd go from 67.5 to 68.5). Although the lower stack height is a high 16mm, which offsets some of that, so it could work for you.

    Works Components - 1 0 Degree EC34 EC49 Tapered Steerer Tube Headset e g Yeti ASR

  6. #206
    mtbr member
    Reputation: jon123's Avatar
    Join Date
    Oct 2009
    Posts
    830
    johnd663 -- I'm curious: why did you switch from 29 to 26?

  7. #207
    Snapper
    Reputation: johnd663's Avatar
    Join Date
    Jun 2007
    Posts
    489
    Quote Originally Posted by jon123 View Post
    johnd663 -- I'm curious: why did you switch from 29 to 26?
    purely financial

    I was broke due to a long period of unemployment and then low wage job. Had to sell off all my bikes - a beautiful Ti Blacksheep, Turner Sultan with Enve/King and XTR and had one bike left - a Singular hardtail SS - very blinged out. This bike was great but i wanted more of an alrounder - I wanted suspension. Once i sold the Swift I only had $2.5 grand and the options for a good XL 29er FS in this country for 2 1/2 grand was next to impossible. I had been alittle bored with the FS 29er I had owned and found they were dull, cumbersome and had taken much of the fun out of my riding - they just plow over everything. Many of the newer 29ers have addressed many of the issues mentioned - Yeti, Santa Cruz, Transition, Rocky Mountain,Spec and Trek - but the cost of entry is currently too high.
    So what is the best alrounder I could get for 2.5 grand? Found a secondhand Yeti 5 for 2.75 grand - perfect.
    At 6.4 and 100 kgs, I believe a 29er would suit me better for fit, but there is 5 pounds difference between my 5 and 29er Sultan and the 5 is more fun on the trail.
    I now have a 29er SS in the stable and would like to add a FS 29er when funds allow but so happy to be able to get out on the 5 and enjoy my riding again.
    26ers arent dead - no way - get the best bike you can afford regardless of wheelsize. Yeti have always been one of the best.
    I would add that a 4 inch bike with steeper HA would have been a better alrounder for the trails I ride - like a Flux or ASR-C but there arent too many XLs floating around these parts.
    cheers
    JD

  8. #208
    Snapper
    Reputation: johnd663's Avatar
    Join Date
    Jun 2007
    Posts
    489
    Quote Originally Posted by ddprocter View Post
    Thanks lschen

    So I guess a working angleset would be this Works EC34/EC49 (coincidentally, it says for yeti asr), with 1.0 degree adjustment. That's pretty steep though (you'd go from 67.5 to 68.5). Although the lower stack height is a high 16mm, which offsets some of that, so it could work for you.

    Works Components - 1 0 Degree EC34 EC49 Tapered Steerer Tube Headset e g Yeti ASR
    will try dropping the forks from 130 - 120mm for starters and see how i go.
    cheers folks

  9. #209
    nero
    Reputation: nerofinis's Avatar
    Join Date
    Mar 2011
    Posts
    70
    I bought a set of Hope Pro Evo 2 laced to Flow ex rims for my 5 and some new rubber to go along with them Schwalbe Nobby Nic 2.35 front and Racing Ralph 2.25 rear. Well I finally got a chance to ride today and the difference is night and day. Grip for days and the bike felt amazing in the corners, very confidence inspired although i did have a few "oh ****" moments because I was able to carry so much more speed.

    I must say that I was kinda thinking that I may have made a mistake in going with the flow ex over the arch ex do to the weight of the flow but that was put to rest this afternoon. The flows spin up and accelerate super quick out of corners. I'm really not sure what to attribute it to... stiffness, the wider rim profile, new rubber or the fact that this is my first tubeless setup. < I know I'm super late to the party. Either way I just thought I would share my stoke!

  10. #210
    Recently Returned Rider
    Reputation:
    Join Date
    Feb 2008
    Posts
    11

    New to the Club

    Just bought my first Yeti. Took it out on the trail for the first time this past week. My god is this thing fast and nimble. Definitely lives up to the comments/reviews.

    Attached Thumbnails Attached Thumbnails The ASR 5 build/picture thread-img_1584.jpg  

    Last edited by Gladden; 01-31-2013 at 07:42 PM.

  11. #211
    mtbr member
    Reputation: KevinGT's Avatar
    Join Date
    Dec 2012
    Posts
    1,829
    Nice! What color is that? I don't see a "c" so I'm assuming it's an aluminum but that doesn't look like black ano.

    And what did you build it up with? Stock Yeti build or custom?

  12. #212
    Recently Returned Rider
    Reputation:
    Join Date
    Feb 2008
    Posts
    11
    Thanks man. It's a gloss black in aluminum. This scheme:

    http://www.calgarycycle.com/bikes/im...5_aluminum.jpg

    All stock for now. Any suggestions on upgrades from other ASR riders would be welcomed.

  13. #213
    just ride
    Reputation:
    Join Date
    Oct 2006
    Posts
    643
    Hi Guys,

    I'm planing on buying the ASR-5 alloy frame but have few concerns:

    1) How is the carbon rear triangle for the 2012 models? Last time I was reading about this bike (in 2011), they had faulty rear triangle. Has that been addressed for the current model?

    2) I know this bike is stiff but is there brake jacking on this? Does the rearend starts hopping all over the place once brake is applied?

    3) The 2012 models uses GXP BB now, right? On the pictures I've seen online, the BB frame is threaded.

    4) Do any of you guys use this bike for longer rides? Is it comfortable like the reviews for blur xc/trc? They mentioned the blur xc/trc are the weapon of choice for longer rides. I'm hoping that I can use this bike for long rides as well. None of my bikes can do that with the exception of my Nickel.

    Here are the Full Suspension bikes I have owned since 2010:
    2008 Blur LT
    2009 Scott Genius
    2011 Santa Cruz Nickel
    2012 Specialized Stumpy Expert Carbon Evo

    Of all the bikes, the Nickel was my favorite. This is why I'm here. I like the single pivot, weight, low BB, steep SA, slack HA & the price on the ASR-5.

    Please advise. Thanks!

  14. #214
    > /dev/null 2&>1
    Reputation: Procter's Avatar
    Join Date
    Feb 2012
    Posts
    3,425
    1) I have a 2011 ASR5C, which may or may not be the same as the 2012 carbon rear, I'm not sure. The chainstays have alloy reinforcement inside. I've got > 500 miles on medium-aggressive Bay Area trails. No probs. I don't really jump this bike too much, but I don't avoid modest drops either. Haven't heard anyone report any issues in the Yeti forum recently.

    2) Brake Jack - There's a tad more than my Pivot Firebird (DW link) but not bad. I don't feel its an issue. It will be noticeable compared to your stumpy but you'll probly forget about it after a few rides. Its just going to be 'typical' jack for a low-pivot single-pivot.

    3) edited: whoops, gxp cranks are not compatible with their bb30 version, sorry! but remaining advice still stands: My 2011 is a regular 73mm threaded, and I use a Sram XX GXP crank with the standard threaded GXP BB. Yeti Cycles / Home says its still 73mm shell as of the '13 model as well.

    4) Long rides: This bike is sort of an F1 racer who's suspension stays on the stiff side then wakes up in the gnar, especially if you use pro-pedal or CTD. They have tuned the RP23 really well on this bike so that it resists pedal bob in the first inch of travel, then livens up after that.

    So it'll be a mixed bag - it probably won't feel as plush as your evo in technical climbing and technical flats, but, it could make up for it by being light and minimizing pedal bob. Hard to say till you ride one. On this front, you could consider a 150mm fork too. I have a talas 130-150 which I think is perfect for this bike.

    Hope that helps!
    Last edited by Procter; 02-11-2013 at 10:13 PM.

  15. #215
    mtbr member
    Reputation:
    Join Date
    Jul 2007
    Posts
    2,925
    Little help with ASR5 sizing, please. I normally ride mediums and I'm currently on a MotoLite. The medium asr5 seems a bit longer than what I'd normally ride. Im 5'8 with a 32" inseam so a little bit longer in the legs than most but only by a tad. I prefer not to have my seatpost well above my bars and a Med frame generally helps with this. However, the Small frames have almost the same seat tube length so I'm I. Between sizes and undecided.

    Can anyone help me make my decision? Thanks.

  16. #216
    mtbr member
    Reputation: BMC FS's Avatar
    Join Date
    Dec 2011
    Posts
    83
    Carbon rear triangle. Anyone having issues with chain slap on the underside of the rear triangle? Yeti did not offer protection hear as they did on chainstay. Also, why did they leave outer, top corner of chainstay exposed? getting some chain marks there also. Chain is not too long, i only have two links past full tension in highest gears. Run a 2x10 XT. Hits the underside in small ring up front and outer corner in big ring. Currenty having to use an old tube for chainstay protection but it would not reach the underside slap area. Guess I'll just have to resort to installing the silicone tape over and over. Bummer design flaw. Realy bummed me out when noticed all the marks after a couple rides. Other than that, bike is great.

  17. #217
    Austin, Texas
    Reputation: smokehouse4444's Avatar
    Join Date
    Apr 2011
    Posts
    164






    Joined the Yeti Tribe last week when I finally had my build completed. I am absolutely loving it, though only two rides so far. Everything about it feels fantastic. I normally ride a quick set of loops on a track close to me in about 53-58 minutes. I looked at my watch the other day after my first ride and was astonished to see a 49:02 staring up at me. Followed that up yesterday with a tired 49:32. Wow!!!

    2012 Yeti ASR-5 frame w/Fox CTD Kashima shock
    RockShox Recon Gold RL Fork
    XT Shifters/Deraillers/Cassette
    Stroker Hydraulic Brakes
    Cane Creek 110 Headset
    Easton Haven Carbon Bar
    Truvativ Crank
    WellGo MG-1 Mag Flats
    Terry Fly Saddle
    Truvativ Seatpost
    Odi Rogue Grips
    WTB Laser CrossCountry Wheels
    Schwalbe Racing Ralphs (new design)

  18. #218
    mtbr member
    Reputation: KevinGT's Avatar
    Join Date
    Dec 2012
    Posts
    1,829
    GORGEOUS bike Smokehouse! Love love love the Turquoise!

  19. #219
    mtbr member
    Reputation: KevinGT's Avatar
    Join Date
    Dec 2012
    Posts
    1,829
    Quote Originally Posted by mnigro View Post
    Little help with ASR5 sizing, please. I normally ride mediums and I'm currently on a MotoLite. The medium asr5 seems a bit longer than what I'd normally ride. Im 5'8 with a 32" inseam so a little bit longer in the legs than most but only by a tad. I prefer not to have my seatpost well above my bars and a Med frame generally helps with this. However, the Small frames have almost the same seat tube length so I'm I. Between sizes and undecided.

    Can anyone help me make my decision? Thanks.
    I think you're dead on for a medium. I'm 5' 6" with a 29" inseam and the Small is absolutely perfect. In fact, the cockpit was a bit tighter than I like with a 50mm stem so I'll probably go up to 90mm.

    At your height and inseam, I think you'd be a perfect fit on the Medium.

  20. #220
    > /dev/null 2&>1
    Reputation: Procter's Avatar
    Join Date
    Feb 2012
    Posts
    3,425
    Quote Originally Posted by BMC FS View Post
    Carbon rear triangle. Anyone having issues with chain slap on the underside of the rear triangle?
    Not sure where exactly you're referring to - I got some scrapes where the red arrow is, so I covered this with a piece of stick-on frame guard. I'm not sure whether this was chain slap or hitting it on roots and rocks - chain can't really get up there very easily unless it comes off. But, frame guard fixed it.
    The ASR 5 build/picture thread-2013-02-16_15-35-19_204.jpg

    Also, why did they leave outer, top corner of chainstay exposed? getting some chain marks there also.
    Not sure what you mean here either, but, on all my bikes, I've always had chips and chain slap all around where the green arrows are, so I wrap both the chainstay and the seatstay with extra handlebar tape or cut an inner tube down the middle and use it for wrap.

  21. #221
    Austin, Texas
    Reputation: smokehouse4444's Avatar
    Join Date
    Apr 2011
    Posts
    164
    Quote Originally Posted by KevinGT View Post
    GORGEOUS bike Smokehouse! Love love love the Turquoise!
    Thank you my man. Funny you use that particular word. The first day that i rode the Yeti, i was picking the bike up into the bed of the truck and a couple of guys rode by and they hit the brakes and one of the guys said, "GOD, that is a gorgeous bike". Made that first ride even better!

  22. #222
    mtbr member
    Reputation: Jasondenney's Avatar
    Join Date
    Feb 2013
    Posts
    71

    Yeti ASR-5 Custom Build

    Hi,
    My LBS was cool enough to let me build this bike from the ground up using their tools (hence the picture overload, sorry). It was a huge learning experience and a lot of fun, hope you guys like it!

    Frame: Yeti ASR 5 Alloy w/ Fox CTD Kashima Shock
    Fork: Fox Float F.I.T. RLC Kashima w/ custom slikgraphic yeti decals
    Wheels: Mavic Crossmax SX Wheels
    Brakes: Shimano Saint 180mm/180mm
    Crank: Shimano Saint
    Shifter: Shimano Saint
    Derailleur: Shimano Saint
    Pedals: Shimano XTR trail SPDs
    Handlebar: Raceface sixc DH cut to 30 inches
    Stem: Raceface Atlas (50mm)
    Seatpost: Thomson
    Saddle: WTB Yeti rocket
    Seat Clamp: Yeti
    Grips: ODI Yeti addition
    Tires: Schwalbe Nobby Nic


    Still planning to add a Fox d.o.s.s. dropper post but it wasn't in the initial build budget so it'll have to wait for a few more paydays.
    Attached Thumbnails Attached Thumbnails The ASR 5 build/picture thread-img_2147.jpg  

    The ASR 5 build/picture thread-img_2206.jpg  

    The ASR 5 build/picture thread-img_2208.jpg  

    The ASR 5 build/picture thread-img_2209.jpg  

    The ASR 5 build/picture thread-img_2211.jpg  

    The ASR 5 build/picture thread-img_2212.jpg  

    The ASR 5 build/picture thread-img_2215.jpg  

    The ASR 5 build/picture thread-img_2213.jpg  

    Attached Images Attached Images  
    Last edited by Jasondenney; 02-18-2013 at 11:47 AM.

  23. #223
    mtbr member
    Reputation: Jasondenney's Avatar
    Join Date
    Feb 2013
    Posts
    71

    We the people ...

    ...
    Last edited by Jasondenney; 02-18-2013 at 09:02 AM. Reason: cant figure out how to delete this?..

  24. #224
    mtbr member
    Reputation: Jasondenney's Avatar
    Join Date
    Feb 2013
    Posts
    71
    [QUOTE=BMC FS;10164573]Carbon rear triangle. Anyone having issues with chain slap on the underside of the rear triangle?

    Have you tried any of the new Shimano Deralleurs with their shadow technology? It has worked well for me and limits most chain slap.
    Last edited by Jasondenney; 02-18-2013 at 08:57 AM.

  25. #225
    mtbr member
    Reputation:
    Join Date
    May 2010
    Posts
    14

    my ASR-5

    Here is my ASR-5, very happy with her

    It's a pity that ASR-5 alloy is no longer available since 2013...

    Frame: Yeti ASR 5 Alloy in small, w/ Fox CTD Kashima Shock
    Fork: Rockshox Revelation 150-120 DPA,
    Wheels: Mavic XM719, DT supercomp, F/ XTR 15-thru R/ CK 142x12 hub
    Brakes: Shimano XTR M985
    Crank: Shimano XTR 38(Blackspire)/24T, w/ Blackspire chain guard, E13 chain guide
    Shifter: Sram X.0
    F. Derailleur: Shimano XTR M970
    R. Derailleur: Sram X.0 9sp
    Pedals: VP
    Handlebar: Truvativ AKA cutted to 680mm
    Stem: Truvativ AKA 70mm
    Seatpost: FSA Afterburner
    Saddle: Fizik Gobi XM
    Seat Clamp: Salsa
    Tires: F/Schwalbe Nobby Nic 2.25 R/Schwalbe Rocket Ron 2.25

    The ASR 5 build/picture thread-wp_20130224_053-1000.jpg

    The ASR 5 build/picture thread-wp_20130224_057-1000.jpg

    The ASR 5 build/picture thread-wp_20130224_070-1000.jpg

    The ASR 5 build/picture thread-wp_20130224_074-1000.jpg

    The ASR 5 build/picture thread-wp_20130224_076-1000.jpg

  26. #226
    mtbr member
    Reputation:
    Join Date
    Jul 2007
    Posts
    2,925

    Here's my new 5

    Vanilla build with XT drive train, XX Rev, GD post and Oozey wheels. No ride time as I just built it up yesterday but it feels good so far. Can't wait for the ifrst ride tomorrow... now if the rain will hold off.

    The ASR 5 build/picture thread-asr5.jpg

  27. #227
    mtbr member
    Reputation:
    Join Date
    Sep 2010
    Posts
    407
    Damn! That blue frame and your build look nice and clean.
    Bravo!
    Lynn Woods
    JRA cycles

  28. #228
    mtbr member
    Reputation:
    Join Date
    Jul 2007
    Posts
    2,925
    Thanks. I was worried how it would look if I went with the blue frame. Hoped for an Ano Black but this is all that was left. I would have bought it no matter what color it came in though. My rear brake line was a bit too short so had to improvise with the routing until the new line comes it.

    I also went a little crazy with the frame tape on the rear triangle... Not much bare carbon left back there.

  29. #229
    mtbr member
    Reputation:
    Join Date
    Jan 2009
    Posts
    28
    Quote Originally Posted by mnigro View Post
    I also went a little crazy with the frame tape on the rear triangle... Not much bare carbon left back there.

    I did the same. I also do like the chainstay protection Yeti installs from the factory.

  30. #230
    mtbr member
    Reputation:
    Join Date
    Jul 2007
    Posts
    2,925
    Any bigger riders on a 5 that can chime in on Psi of the ctd? I'm 200lb and running a 1/2 inch sag, should be spot on 25%, which for me is 195 psi. I had this on its maiden voyage today and it tended to blow through the mid travel. I was a bit surprised because I though the bike was supposed to have a more firm mid stroke. I was thinking that it might be initial stiction on the shock that is causing it to show 25% sag when it might really be softer but I'm rocking around a bit and then resetting the o-ring so it should be correct.

    What is your weight and what psi you running?

  31. #231
    mtbr member
    Reputation:
    Join Date
    Jul 2007
    Posts
    2,925
    Btw, the bike rides and climbs well with the zero stack bottom cup I'm using and the Rev at 130mm. Gets hung up on the chunky stuff during steep climbs a bit but no more than my old motolite. Really flickable and fun bike. Digging it so far.

  32. #232
    mtbr member
    Reputation:
    Join Date
    Feb 2013
    Posts
    31
    Just got my bike back from the LBS after transferring all my parts over from my roscoe... well happy!!
    Attached Thumbnails Attached Thumbnails The ASR 5 build/picture thread-bike.jpg  


  33. #233
    Austin, Texas
    Reputation: smokehouse4444's Avatar
    Join Date
    Apr 2011
    Posts
    164
    Lots of beauties posted recently. Love these bikes. I've noticed on mine that the difference when I switch from the 29er to the 5 are not as dramatic. Not sure why, probably head angle or something, but couldn't be happier with the turquoise baby!

  34. #234
    mtbr member
    Reputation:
    Join Date
    Oct 2012
    Posts
    40
    Anybody weighed the ASR-5 X0/x9 build from CC yet? Mines is coming in the next couple days so just curious!

  35. #235
    mtbr member
    Reputation:
    Join Date
    Jul 2007
    Posts
    2,925
    CC should give the total build weight at the bottom of the order page.

  36. #236
    mtbr member
    Reputation:
    Join Date
    Oct 2012
    Posts
    40
    Ya it said 25.88 pounds, just seemed a hair on the light side for an aluminum frame with a 140 on it. Stoked if its really that light!

  37. #237
    mtbr member
    Reputation:
    Join Date
    Jan 2013
    Posts
    1
    Here's mine. Just added a WTB yeti saddle and will be getting a dropper seat post soon.

    Spec is

    ASR5a in large
    Fox Float FIT 140mm
    Xt all round
    Hope hubs with stans arches
    Thomson 70mm stem
    Purgatory tyres 2.3 front and rear


    My new Yeti by lehutch, on Flickr


    Llandegla, frozen but fast by lehutch, on Flickr

    Best bike ever

  38. #238
    Long live the ASR-7
    Reputation: Doba's Avatar
    Join Date
    Nov 2008
    Posts
    269
    Yeti Cycles ASR-5 with Fox Float CTD - 2012 from Departmentofgoods.com

    If anyone is looking for a smoking deal on a frame, here you go.

  39. #239
    mtbr member
    Reputation: BMC FS's Avatar
    Join Date
    Dec 2011
    Posts
    83

    At Moonscape

    ASR5 Med frame Al
    Fox RL 140mm fork
    FSA SL K bars and seatpost
    XT 38/28 crankset
    Sram XO rear derailleur X9 shifters and front derailleur
    Reynolds Wheelset
    Forte Tires, Tsali rear, Pisgah front
    Beautiful Loaded stem 50mm
    Stainless Eggbeaters
    The ASR 5 build/picture thread-moonscape.jpg
    Last edited by BMC FS; 04-01-2013 at 06:32 AM. Reason: photo change

  40. #240
    mtbr member
    Reputation: BMC FS's Avatar
    Join Date
    Dec 2011
    Posts
    83
    Quote Originally Posted by ddprocter View Post
    Not sure where exactly you're referring to - I got some scrapes where the red arrow is, so I covered this with a piece of stick-on frame guard. I'm not sure whether this was chain slap or hitting it on roots and rocks - chain can't really get up there very easily unless it comes off. But, frame guard fixed it.
    Click image for larger version. 

Name:	2013-02-16_15-35-19_204.jpg 
Views:	628 
Size:	133.6 KB 
ID:	772403



    Not sure what you mean here either, but, on all my bikes, I've always had chips and chain slap all around where the green arrows are, so I wrap both the chainstay and the seatstay with extra handlebar tape or cut an inner tube down the middle and use it for wrap.
    Sorry for the late late reply. Here is where the chainlsap is. Don't know how to put those fancy arrows on an attachment but if you blow up pics you could see nics. The ASR 5 build/picture thread-lower-chain-stay.jpgThe ASR 5 build/picture thread-upper-chain-stay.jpg

  41. #241
    > /dev/null 2&>1
    Reputation: Procter's Avatar
    Join Date
    Feb 2012
    Posts
    3,425
    Quote Originally Posted by BMC FS View Post
    Sorry for the late late reply. Here is where the chainlsap is. Don't know how to put those fancy arrows on an attachment but if you blow up pics you could see nics. Click image for larger version. 

Name:	lower chain stay.jpg 
Views:	409 
Size:	75.7 KB 
ID:	785294Click image for larger version. 

Name:	upper chain stay.jpg 
Views:	309 
Size:	72.2 KB 
ID:	785296
    Ok so on Pic 1: have a piece of stick-on frameguard there now. You could even use 2 layers. This is needed pretty much on every bike I have ever had, even my other bike with a MRP G2 chainguide. Don't know how it gets up there but it does. And, even if you used a chainguide to reduce chain slap, one day you'll probably get chainsuck up there on a muddy day, so best to protect it.

    On pic 2: I think this is a pic of chips on the bottom, outer edge of the chainstay, right? This is most likely chain slap and unavoidable. I highly recommend wrapping the entire chainstay as in my pic, with bar-tape or an inner-tube cut down the middle. This has also been a necessity on every bike I've owned.

  42. #242
    mtbr member
    Reputation: BMC FS's Avatar
    Join Date
    Dec 2011
    Posts
    83
    Quote Originally Posted by ddprocter View Post
    Ok so on Pic 1: have a piece of stick-on frameguard there now. You could even use 2 layers. This is needed pretty much on every bike I have ever had, even my other bike with a MRP G2 chainguide. Don't know how it gets up there but it does. And, even if you used a chainguide to reduce chain slap, one day you'll probably get chainsuck up there on a muddy day, so best to protect it.

    On pic 2: I think this is a pic of chips on the bottom, outer edge of the chainstay, right? This is most likely chain slap and unavoidable. I highly recommend wrapping the entire chainstay as in my pic, with bar-tape or an inner-tube cut down the middle. This has also been a necessity on every bike I've owned.
    Thanks for the tip. Have a piece of vinyl tape for temp. Need to get some of the Lizard skin silicone tape pieces. Just trying to keep it clean looking as possible so trying to avoid a big wrap of some sort unless I can find something cool looking.

  43. #243
    mtbr member
    Reputation:
    Join Date
    Apr 2012
    Posts
    926
    Quote Originally Posted by BMC FS View Post
    Sorry for the late late reply. Here is where the chainlsap is. Don't know how to put those fancy arrows on an attachment but if you blow up pics you could see nics. Click image for larger version. 

Name:	lower chain stay.jpg 
Views:	409 
Size:	75.7 KB 
ID:	785294Click image for larger version. 

Name:	upper chain stay.jpg 
Views:	309 
Size:	72.2 KB 
ID:	785296
    How does the chain get way down/over there on pic #1? Are you sure it's not from rocks being thrown up from the front wheel? As for the bottom pic, I put a piece of black electrical tape right there on my frame, and there's not a scratch after a full season of riding. Maybe a Shadow+ or Sram type2 would help....
    Last edited by max_lombardy; 04-13-2013 at 09:27 AM.

  44. #244
    mtbr member
    Reputation: gomer hardtale's Avatar
    Join Date
    Jul 2008
    Posts
    234

    new baby

    the new bike on it's maiden voyage. pretty sweet
    Attached Thumbnails Attached Thumbnails The ASR 5 build/picture thread-img_1072.jpg  

    bikeporn is protected speech

  45. #245
    mtbr member
    Reputation: BMC FS's Avatar
    Join Date
    Dec 2011
    Posts
    83
    Quote Originally Posted by max_lombardy View Post
    How does the chain get way down/over there on pic #1? Are you sure it's not from rocks being thrown up from the front wheel?
    Yes, not rocks. It happens while in the small ring. I have a spacer on the drive side of bottom bracket so can't move it out anymore. Just have to keep protective tape on it. Bikes worth it though.

  46. #246
    mtbr member
    Reputation:
    Join Date
    Jun 2011
    Posts
    170

    My much loved ASR5a

    DSC00896 by ruscle1, on Flickr" width="549">

    DSC00887 by ruscle1, on Flickr" width="549">

    DSC00894 by ruscle1, on Flickr" width="549">

    DSC00885 by ruscle1, on Flickr" width="549">

    DSC00892 by ruscle1, on Flickr" width="549">

    Full Spec:
    * Frame Size: Medium ASR5a
    * Fork: BOS Deville 140
    * Shock: Bos Vip'R
    * Brakes: Hope Tech EVO V2's with 183mm rotors
    * Cranks: Middleburn Duo X-Type
    * Shifters: Sram XX
    * Front Derailleur: Sram XX
    * Rear Derailleur: Sram XX
    * Pedals: Point1 Podium's
    * Stem: Easton Haven 55mm
    * Handlebar: Easton Havoc carbon
    * Seatpost: Rock shox Reverb
    * Saddle:Gilles Berthoud Galibier
    * Bottom Bracket: Hope Ceramic
    * Cassette: Sram X0, 11-36
    * Headset: Chris King
    * Grips: ESI Chunky foam
    * Spokes: Sapim CX-Ray
    * Front Tire: Continental UST Rubber Queen 2.2
    * Front Rim: Light-bicycle wider carbon
    * Front Hub/Skewer: Chris King ISO 20mm
    * Rear Tire: Continental UST Rubber Queen 2.2
    * Rear Rim: Light-bicycle wider carbon
    * Rear Hub/Skewer: Chris King ISO 12x142
    * Weight: Not sure, probably close to 27LB

  47. #247
    mtbr member
    Reputation:
    Join Date
    Jan 2011
    Posts
    3
    Here is my first ASR5:

    <a href="http://s283.photobucket.com/user/edwardgurhy/media/YetiASR5_zps4eeed560.jpg.html" target="_blank"><img src="http://i283.photobucket.com/albums/kk318/edwardgurhy/YetiASR5_zps4eeed560.jpg" border="0" alt=" photo YetiASR5_zps4eeed560.jpg"/></a>

    Here is my second ASR5, doing a spot of riding in Les Arc:

    <a href="http://s283.photobucket.com/user/edwardgurhy/media/IMG_0669_zps41205764.jpg.html" target="_blank"><img src="http://i283.photobucket.com/albums/kk318/edwardgurhy/IMG_0669_zps41205764.jpg" border="0" alt=" photo IMG_0669_zps41205764.jpg"/></a>

    ...and back home after a bit of a clean and refresh:

    <a href="http://s283.photobucket.com/user/edwardgurhy/media/IMG_0958_zpsedfa9467.jpg.html" target="_blank"><img src="http://i283.photobucket.com/albums/kk318/edwardgurhy/IMG_0958_zpsedfa9467.jpg" border="0" alt=" photo IMG_0958_zpsedfa9467.jpg"/></a>

    .... and here is the current one:

    <a href="http://s283.photobucket.com/user/edwardgurhy/media/IMG_0316_zps50d3eb4c.jpg.html" target="_blank"><img src="http://i283.photobucket.com/albums/kk318/edwardgurhy/IMG_0316_zps50d3eb4c.jpg" border="0" alt=" photo IMG_0316_zps50d3eb4c.jpg"/></a>

    All different builds - but some parts have migrated from one bike to another. Each done lots of miles and the current one is in bits waiting for some suspension bushes to arrive. Now has a dropper seatpost on which is great fun....

  48. #248
    mtbr member
    Reputation: smithcreek's Avatar
    Join Date
    Nov 2012
    Posts
    496
    Took her out for a first ride yesterday and I'm very happy. Guess I can now officially say I"m glad I joined the tribe. So much more nimble than my last bike for the slow, techy, twisty, rocks and roots sections we have in New England. Tight up and downhill turns are a breeze compared to what I was used to. The only thing I need to get used to is getting the front up. My last bike was too easy, and I don't mean in a good way, so that's just what I'm used to. I'll need to change my technique, put a bit more oomph into it. I had been thinking of going back to a hardtail but this bike should be perfect for what I need. The rear end is very firm, easy to pedal, but takes away a lot of the big hits.

    The bike is mainly X0, Cane Creek Headset, Easton Haven stem, American Classic wheels. Fork is a Fox Talas 110-140 which is great to have on the techy sections. In fact most of my riding is on the 110 setting and the rear suspension on this bike is nice and firm so pedal strikes were no issue, and on our trails that's important. The Ritchey bars and Shimano pedals are about the only thing that will be changed once I figure out what I want.

    The ASR 5 build/picture thread-dsc01090.jpg
    Last edited by smithcreek; 04-06-2013 at 07:30 AM.

  49. #249
    mtbr member
    Reputation: KevinGT's Avatar
    Join Date
    Dec 2012
    Posts
    1,829
    Love those less-than-common colors. The slate gray ano, blue, and orange look fantastic!

  50. #250
    mtbr member
    Reputation:
    Join Date
    Apr 2012
    Posts
    926
    Dang Ruscle that's a crazy build! Very non-traditional!!! Cool

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •