Results 1 to 3 of 3
  1. #1
    mtbr member
    Reputation: Bunyan's Avatar
    Join Date
    Dec 2007
    Posts
    451

    Roval Traverse 29 - tubeless setup

    I know I was looking for this info before and couldn't find it so I'll post it up in case anyone is looking for it.

    I was able to set up my new Roval Traverse 29er tubeless with a floor pump running 2.2 Purgatory tires. They sealed right up and are holding pressure just fine.

    Now I just need to find out if these wheels are going to be Clyde worthy. Time will tell...

  2. #2
    usually cranky
    Reputation: b-kul's Avatar
    Join Date
    Sep 2009
    Posts
    9,927
    no goop?

  3. #3
    mtbr member
    Reputation: Bunyan's Avatar
    Join Date
    Dec 2007
    Posts
    451
    No sorry, I used about 7-8 oz of Stan's goop per wheel.
    I forget if it was front or rear wheel now but remember the weight went from 5.57 lbs to 5.11 lbs.

    My XXL Evo now weighs in at 29.8 lbs. Not to shabby for a 140mm full squish.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •