Results 1 to 3 of 3
  1. #1
    mtbr member
    Reputation:
    Join Date
    Oct 2005
    Posts
    361

    20mm front hub bearing replacement advice needed

    So I have a 20mm front hub that is running a bit rough to say the least. I was wondering if anyone had some advice on how to replace the bearings?

    The end caps don't seem to pop off. There is an aluminum sleeve in the center but I'm not sure how to access it.

    Thanks
    Attached Thumbnails Attached Thumbnails 20mm front hub bearing replacement advice needed-imag0423.jpg  


  2. #2
    mtbr member
    Reputation: 006_007's Avatar
    Join Date
    Jan 2004
    Posts
    8,249
    Those end caps will come off, then you will drive the bearings out.

    Hold the end gaps in a vice with a set of soft jaws to not damage the caps, then work them out gently.

  3. #3
    mtbr member
    Reputation:
    Join Date
    Oct 2005
    Posts
    361
    great managed to get the end caps off...do i hammer the aluminum sleeve to get the bearings out ?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •