Page 1 of 2 12 LastLast
Results 1 to 100 of 191
  1. #1
    gobsmacked Moderator
    Reputation: girlonbike's Avatar
    Join Date
    Apr 2008
    Posts
    8,685

    Thread for Wanted Items for Vintage MTB Only

    Since for sale ads are now free and wanted ads have always been free but hard to find, instead of flooding the forum with wanted threads, let's just post them here. MCS and I will move things here as they crop up as lurkers and new people may not see this.

    Maybe negotiate through pms if you can help people out. As always, be wary of spammers and scammers. Just because they have an MTBR account doesn't make them legit. Use common sense.

    VINTAGE MOUNTAIN BIKES AND PARTS ONLY. Let's say the cut off should be around 1997ish give or take a few years.
    Last edited by girlonbike; 04-11-2016 at 09:58 AM.

  2. #2
    rismtb
    Reputation:
    Join Date
    Dec 2012
    Posts
    492
    ok anybody got a Trailmaster any model for sale?

  3. #3
    gobsmacked Moderator
    Reputation: girlonbike's Avatar
    Join Date
    Apr 2008
    Posts
    8,685

    Thread for Wanted Ads and Posts for Vintage MTB Only

    Wait. Me too. Maybe not the Laguna though.

  4. #4
    mtbr member
    Reputation: tductape's Avatar
    Join Date
    Mar 2008
    Posts
    2,380
    Seek:

    Salsa P10
    2 wheels worth black deer head brakes
    Trailmaster Large
    Cunningham Large
    Ibis Custom Large
    Breezer II or III Large
    Seek: Koski Trailmaster. Breezer Series 2 or 3. Cunningham Racer.

  5. #5
    mtbr member
    Reputation:
    Join Date
    Oct 2013
    Posts
    15
    Dear Forum Members:

    I am searching for a front derailleur for my early nineties Ritchey Mountain Bike restoration.

    Trying to setup NOS, Ritchey Compact 175 Crankset on the bike.

    The existing Shimano Deore XT front derailleur is not compatible with Ritchey Crankset.

    Looking for good upgrade for Front Derailleur, one that I can scale out if I add a new rear derailleur in the future.

    Please provide make and model of Front Derailleur (with flat profile outer plate), as this has been a daunting project.

    Thanks,

    Casey

  6. #6
    gobsmacked Moderator
    Reputation: girlonbike's Avatar
    Join Date
    Apr 2008
    Posts
    8,685
    Quote Originally Posted by cbbond View Post
    Dear Forum Members:

    I am searching for a front derailleur for my early nineties Ritchey Mountain Bike restoration.

    Trying to setup NOS, Ritchey Compact 175 Crankset on the bike.

    The existing Shimano Deore XT front derailleur is not compatible with Ritchey Crankset.

    Looking for good upgrade for Front Derailleur, one that I can scale out if I add a new rear derailleur in the future.

    Please provide make and model of Front Derailleur (with flat profile outer plate), as this has been a daunting project.

    Thanks,

    Casey
    Can you post a picture of your crankset? There should be tons of XT FDs that you can use. They are pretty prevalent. You would need a seattube diameter measurement as well.

  7. #7
    gobsmacked Moderator
    Reputation: girlonbike's Avatar
    Join Date
    Apr 2008
    Posts
    8,685
    Quote Originally Posted by tductape View Post
    Cunningham Large
    If one lands within your radar and you swing and miss, it's off the list.

  8. #8
    mtbr member
    Reputation: tductape's Avatar
    Join Date
    Mar 2008
    Posts
    2,380
    Quote Originally Posted by girlonbike View Post
    If one lands within your radar and you swing and miss, it's off the list.
    I had some good advice that it was too small.
    Seek: Koski Trailmaster. Breezer Series 2 or 3. Cunningham Racer.

  9. #9
    mtbr member
    Reputation:
    Join Date
    Oct 2013
    Posts
    15
    I uploaded an image of my Ritchey Logic Compact (175) cranks (**).

    **Note: Searching for Compatible Front Derailleur

    Please help!
    Attached Thumbnails Attached Thumbnails Thread for Wanted Items for Vintage MTB Only-ritcheylogiccompactcranks.jpg  

    Last edited by cbbond; 04-11-2016 at 11:56 AM. Reason: Upload Image

  10. #10
    mtbr member
    Reputation:
    Join Date
    Apr 2011
    Posts
    178
    I am looking for DKG shifter mounts for XTR900. Anyone got a spare pair left?

    So greedy Mr. Aemmer....! What kind of a wanted list is that?

  11. #11
    Stokeless Asshat
    Reputation: jeff's Avatar
    Join Date
    Jan 2004
    Posts
    3,346
    Thanks G.

    Quality 1" fork. Steel. Threaded or threadless. 420 AC. 8 1/2" + steer tube tube needed.
    Mid 80's vintage 650b rims. 32 or 36 hole. Double wall preferred.
    27.0 seat post. Silver. Ritchey or Nitto early 90's vintage. Silver. 330mm+.
    Last edited by jeff; 06-29-2016 at 05:09 PM.
    Zip ties? Not on my bike!

    Want:
    650B rims or wheel set. 80's vintage 32 or 36 x 135mm

  12. #12
    VRC Illuminati
    Reputation: Rumpfy's Avatar
    Join Date
    Dec 2003
    Posts
    17,574
    Quote Originally Posted by cbbond View Post
    I uploaded an image of my Ritchey Logic Compact (175) cranks (**).

    **Note: Searching for Compatible Front Derailleur

    Please help!
    A 28.6 Suntour XC Pro MD FD would probably be your best option then. The curve of the cage was set to follow the 'compact' microdirve rings.
    I might have one, but I need to see if it's regular XC Pro or MD. Let me know if you're interested and I'll go lookin'.

    Quote Originally Posted by jeff View Post
    Thanks G.


    Ritchey cable hanger. 1" for quill. Not clamp style. Silver.
    I've got one of these. PM me your address and I'll send it your way.
    -eric-

    http://www.rumpfy.com
    Wanted: NDS Suntour XC Pro Microdrive 175mm Crank Arm.

  13. #13
    VRC Illuminati
    Reputation: Rumpfy's Avatar
    Join Date
    Dec 2003
    Posts
    17,574
    While we're at it, I'm looking for a complete set of Ritchey Logic cantilever brakes (silver is ideal).

    I've got a compete set of M732 XT in silver for trade. I might have an ok set of M900 XTR to trade as well.
    -eric-

    http://www.rumpfy.com
    Wanted: NDS Suntour XC Pro Microdrive 175mm Crank Arm.

  14. #14
    mtbr member
    Reputation: rzims's Avatar
    Join Date
    Sep 2005
    Posts
    1,097
    looking for a good rear der for my 1986 Schwinn Sierra

  15. #15
    mtbr member
    Reputation:
    Join Date
    Jul 2012
    Posts
    476
    A 15" WTB Phoenix. I know I know..... keep praying.....

  16. #16
    Stokeless Asshat
    Reputation: jeff's Avatar
    Join Date
    Jan 2004
    Posts
    3,346
    I might be able to help you with those brakes but there's a chance it's the later goldish finish. It will take a few days before I can dig in to the box though.
    Quote Originally Posted by Rumpfy View Post
    While we're at it, I'm looking for a complete set of Ritchey Logic cantilever brakes (silver is ideal).

    I've got a compete set of M732 XT in silver for trade. I might have an ok set of M900 XTR to trade as well.
    Zip ties? Not on my bike!

    Want:
    650B rims or wheel set. 80's vintage 32 or 36 x 135mm

  17. #17
    Humanoid Lobster
    Reputation: Jak0zilla's Avatar
    Join Date
    May 2010
    Posts
    658
    Does anyone have a Suntour XC 9000 FRONT cantilever brake? (Not a rear SE, or a later XC Pro.)
    Don't call it a gooseneck.

  18. #18
    VRC Illuminati
    Reputation: Rumpfy's Avatar
    Join Date
    Dec 2003
    Posts
    17,574
    Quote Originally Posted by jeff View Post
    I might be able to help you with those brakes but there's a chance it's the later goldish finish. It will take a few days before I can dig in to the box though.
    Cool, keep me posted. The levers I have are the goldish finish, so that could work out well. We could work out a trade, but I'd owe you something to balance the deal.
    -eric-

    http://www.rumpfy.com
    Wanted: NDS Suntour XC Pro Microdrive 175mm Crank Arm.

  19. #19
    mtbr member
    Reputation:
    Join Date
    May 2014
    Posts
    204
    In dire need of a Shimano M732 front derailleur in 28.6 clamp. Needs to be mint or near mint for finishing a bike I've been working on for way too long.

    I have cash or cool parts to trade, if that's what you're into.

  20. #20
    rismtb
    Reputation:
    Join Date
    Dec 2012
    Posts
    492
    I have a couple different ones

  21. #21
    mtbr member
    Reputation:
    Join Date
    Dec 2015
    Posts
    68
    Hi,
    I am looking for some stuff which is hard to get and even harder in Europe...

    - Salsa P7 or P10 stem (1", quill)
    - PAUL(DDT) Front Hub, 32°, red, first version (swap possible with a black Bullseye 32° front hub)

    I am located in Berlin/Germany.
    Thanks,
    Marco

    Sorted:
    Dirt Drop (Specialized BB1)
    Last edited by caemis; 05-03-2016 at 09:16 AM.

  22. #22
    -bustin punks
    Reputation: fatchanceti's Avatar
    Join Date
    Jan 2005
    Posts
    582
    The skinwall 26x1.9 Speedmax Tires on my Rock Combo are a bit crusty.

    I know these don't tend to be a super desireable tire, but they work well on that application and blackwalls look stupid on that bike - anybody have some?

    Or something else in the 1.8 or 1.9 range that might work?

  23. #23
    mtbr member
    Reputation:
    Join Date
    Oct 2008
    Posts
    29
    - Cunningham fixed angle seatpost for my 38.2 Phoenix or maybe just the parts where you fit the saddle to the post and ill figure it out from there.
    - Cunningham seatpost Quick release
    - 36 WTB rear hub silver, needs to be the early stickered version not the laser edged.

    ^ all icing on the proverbial cake.

    have; cash, might trade nos wtb new paradigm bits (front hub, headset, bottom bracket (not ti))

  24. #24
    mtbr member
    Reputation: rzims's Avatar
    Join Date
    Sep 2005
    Posts
    1,097
    different rear derailluers?

  25. #25
    DFA
    DFA is offline
    mtbr member
    Reputation: DFA's Avatar
    Join Date
    Jan 2004
    Posts
    365
    1 1/8" 120mm - 0 deg. silver Control Tech ahead stem.

  26. #26
    rismtb
    Reputation:
    Join Date
    Dec 2012
    Posts
    492
    best rear dear I have not nos or anything
    Attached Thumbnails Attached Thumbnails Thread for Wanted Items for Vintage MTB Only-img_6353.jpg  


  27. #27
    rismtb
    Reputation:
    Join Date
    Dec 2012
    Posts
    492

    death by over engineering

    At one point Suntour was at the top of the mfg heap


    Quote Originally Posted by rzims View Post
    different rear derailluers?
    Attached Thumbnails Attached Thumbnails Thread for Wanted Items for Vintage MTB Only-img_6367.jpg  

    Thread for Wanted Items for Vintage MTB Only-img_6350.jpg  


  28. #28
    mtbr member
    Reputation:
    Join Date
    Oct 2013
    Posts
    15
    **Note: I am searching 'FRONT DERAILLEUR' for my Ritchey Project - with flat profile outer plate

  29. #29
    mtbr member
    Reputation: sbsbiker's Avatar
    Join Date
    Dec 2007
    Posts
    2,171
    I'm looking for a Browning automatic front chainring/crankset, and any steel Moots products,(19' steel YBB)

  30. #30
    used to be uno-speedo....
    Reputation: dirtdrop's Avatar
    Join Date
    Dec 2003
    Posts
    1,270
    I am looking for 2 x Ritchey Megabite Z-Max 2.1 tan wall tyres in NOS or very good condition.

  31. #31
    mtbr member
    Reputation: iamkeith's Avatar
    Join Date
    Feb 2010
    Posts
    774
    Quote Originally Posted by dirtdrop View Post
    I am looking for 2 x Ritchey Megabite Z-Max 2.1 tan wall tyres in NOS or very good condition.
    I'm assuming you know about these, but just in case:

    MOMBAT: Tires For Sale
    We still hang bike thieves in Wyoming [Pedal House]

  32. #32
    mtbr member
    Reputation:
    Join Date
    Dec 2015
    Posts
    68
    Quote Originally Posted by caemis View Post
    Hi,
    I am looking for some stuff which is hard to get and even harder in Europe...

    - Salsa P7 or P10 stem (1", quill)
    - PAUL(DDT) Front Hub, 32°, red, first version (swap possible with a black Bullseye 32° front hub)

    I am located in Berlin/Germany.
    Thanks,
    Marco

    Sorted:
    Dirt Drop (Specialized BB1)
    still looking :-)

  33. #33
    mtbr member
    Reputation: tductape's Avatar
    Join Date
    Mar 2008
    Posts
    2,380
    Starting a new project and looking for some missing bits.

    Seek in good to great condition. All proper for 1983:

    Front and rear derailleurs Suntour Mountech. FOUND
    Front/Rear (130) Phil Wood hubs. Steel center, prefer logo intact.
    Suntour XCII Pedals.
    Sella Royal anatomic seat?
    Campagnolo wheel quick release skewers. FOUND
    Shift/Brake housing (yellow preferred) proper for a 1983 build.
    Seidisport chain.
    Last edited by tductape; 05-13-2016 at 04:27 PM.
    Seek: Koski Trailmaster. Breezer Series 2 or 3. Cunningham Racer.

  34. #34
    Got some Bullshot grease?
    Reputation:
    Join Date
    Jun 2009
    Posts
    9

    WTB: WTB Speedmaster Roller Cam Pulleys

    Name:  Rollers.jpg
Views: 1302
Size:  14.3 KB

    I've finally got my hands on a WTB Speedmaster Roller Cam, but the pulleys are wrecked by previous owner.

    I need a set of WTB Speedmaster Roller-Cam Pulleys

  35. #35
    mtbr member
    Reputation:
    Join Date
    Mar 2009
    Posts
    10
    Does anyone here know the part number for the coda rear brake adaptor that allows a standard pattern brake to be bolted up where a Sachs brake once was on the super V 4000 DH.
    Or even where I might find one?
    Also looking for an SDG saddle in red glitter. Any style as long as it's in good condition.

    Will pay good money and postage to australia.Name:  image.jpeg
Views: 1233
Size:  45.2 KBName:  image.jpeg
Views: 1238
Size:  64.4 KB

  36. #36
    mtbr member
    Reputation:
    Join Date
    Jan 2013
    Posts
    357
    Need a pair of M730 XT black cantilever brakes preferably in black. Also looking for either a tioga or answer hyperlite handlebar in black. For an 88 mongoose tomac signature.

  37. #37
    mtbr member
    Reputation:
    Join Date
    Jul 2012
    Posts
    476
    Looking for a set of Black XC Pro Brakes, would love the hanger and cross over cables if you have them too but not a show stopper if not. Thanks!!

  38. #38
    mtbr member
    Reputation:
    Join Date
    Jun 2012
    Posts
    116
    looking for a few skewers
    one front M730 [100mm] has the rubber handle-STILL NEED THIS!!
    one or two sets M737 [100/135] let me know what you got-ONE SET PURCHASED AND STILL LOOKING FOR SECOND SET

    thanks
    Last edited by stingray230sx; 07-28-2016 at 10:38 AM. Reason: partially sorted

  39. #39
    mtbr member
    Reputation:
    Join Date
    Oct 2015
    Posts
    282
    not looking for much, but maybe rare?

    1 - Gravity Research "rim crusher" brake (front or rear, but I don't think it matters)

    Not too much great to trade, but good shape rear/front M735 derailleurs and v brakes, Easton hyperlite bars, 2013 Syntec 27.3 carbon post...

  40. #40
    gobsmacked Moderator
    Reputation: girlonbike's Avatar
    Join Date
    Apr 2008
    Posts
    8,685
    I need Shimano M700 Deerhead derailleurs in pretty great shape. Got cash, got stuff, thanks!

    EDIT: SORTED, thank you rismtb!
    Last edited by girlonbike; 08-03-2016 at 07:46 AM.

  41. #41
    rismtb
    Reputation:
    Join Date
    Dec 2012
    Posts
    492
    Hi girlonbike, I have some early stuff will send pic of f&r

  42. #42
    gobsmacked Moderator
    Reputation: girlonbike's Avatar
    Join Date
    Apr 2008
    Posts
    8,685
    Quote Originally Posted by rismtb View Post
    Hi girlonbike, I have some early stuff will send pic of f&r
    thanks! will send you a pm.

  43. #43
    mtbr member
    Reputation: Williwoods's Avatar
    Join Date
    May 2004
    Posts
    1,004
    I am looking for the Englund Total Air removal/installation tool and spare rebound adjusters.

    just scored some cartridges that came on a Judy and I will need to rebuild ,transplant and install them in my fork. Hoping someone has spares they don't need.




    Name:  1.JPG
Views: 922
Size:  13.1 KB

    Thread for Wanted Items for Vintage MTB Only-93.jpg

    Thread for Wanted Items for Vintage MTB Only-screen-shot-2016-07-27-11.11.52-am.png

  44. #44
    mtbr member
    Reputation:
    Join Date
    Sep 2015
    Posts
    61
    Anyone have a Campagnolo U brake? Im in need of one. The set on eBay is missing to much and is super rough. Thanks!

  45. #45
    Mantis, Paramount, Campy
    Reputation: Shayne's Avatar
    Join Date
    Jan 2004
    Posts
    4,670
    I've got the tool for sure (I've always just installed and removed with my hands) and perhaps the rebound bits. It might not be until the weekend before I can search for them.
    *** --- *** --- ***

  46. #46
    mtbr member
    Reputation: Williwoods's Avatar
    Join Date
    May 2004
    Posts
    1,004
    Thanks Shayne! that would surely help. much appreciated!

  47. #47
    CBI 2L
    Reputation:
    Join Date
    Dec 2012
    Posts
    231
    Looking for a 36 hole Specialized BX23 or GX23 rim. White label preferred.

    Can buy or trade for something else

  48. #48
    rismtb
    Reputation:
    Join Date
    Dec 2012
    Posts
    492
    Hi girlonbike these are the ones I have I couldn't figure out how to download pics on PM pane
    Attached Thumbnails Attached Thumbnails Thread for Wanted Items for Vintage MTB Only-img_6849.jpg  

    Thread for Wanted Items for Vintage MTB Only-img_6848.jpg  

    Thread for Wanted Items for Vintage MTB Only-img_6847.jpg  

    Thread for Wanted Items for Vintage MTB Only-img_6846.jpg  


  49. #49
    gobsmacked Moderator
    Reputation: girlonbike's Avatar
    Join Date
    Apr 2008
    Posts
    8,685
    perfect. pm'ed! thanks!

  50. #50
    the new Gilbert Grape
    Reputation: laffeaux's Avatar
    Join Date
    Jan 2004
    Posts
    5,827
    I'm looking for a wide (25 in. minimum) handlebar appropriate for a late '90s build.

    The frame is from '96, but the components are a bit newer (1997-98 era). To find the width I want the bars will likely be riser - I prefer medium to low rise. Club Roost made a set that would work, and possibly others.

    Thanks.
    Each bicycle owned exponentially increases the probability that none is working correctly.

  51. #51
    mtbr member
    Reputation: Williwoods's Avatar
    Join Date
    May 2004
    Posts
    1,004
    Getting closer to a fully functioning Englund TA system for my '97 Judy XC.

    I am looking for a pair of Englund top caps and the top out springs for a 63mm travel to fit a 97' Judy XC.

    The top out springs shown are what I believe to be the 72mm travel springs.

    Thread for Wanted Items for Vintage MTB Only-img_8111.jpg

    Thread for Wanted Items for Vintage MTB Only-screen-shot-2016-08-02-10.51.02-am.jpg

  52. #52
    Stokeless Asshat
    Reputation: jeff's Avatar
    Join Date
    Jan 2004
    Posts
    3,346
    I have a Bontrager Crowbar with the built in cross brace. I'll measure when I get home if interested.
    Quote Originally Posted by laffeaux View Post
    I'm looking for a wide (25 in. minimum) handlebar appropriate for a late '90s build.

    The frame is from '96, but the components are a bit newer (1997-98 era). To find the width I want the bars will likely be riser - I prefer medium to low rise. Club Roost made a set that would work, and possibly others.

    Thanks.
    Zip ties? Not on my bike!

    Want:
    650B rims or wheel set. 80's vintage 32 or 36 x 135mm

  53. #53
    -bustin punks
    Reputation: fatchanceti's Avatar
    Join Date
    Jan 2005
    Posts
    582
    Quote Originally Posted by laffeaux View Post
    I'm looking for a wide (25 in. minimum) handlebar appropriate for a late '90s build.

    The frame is from '96, but the components are a bit newer (1997-98 era). To find the width I want the bars will likely be riser - I prefer medium to low rise. Club Roost made a set that would work, and possibly others.

    Thanks.
    They aren't necessarily of that vintage, but Salsa made fairly wide "flat bars" with 25.4mm clamps until very recently.

  54. #54
    the new Gilbert Grape
    Reputation: laffeaux's Avatar
    Join Date
    Jan 2004
    Posts
    5,827
    Quote Originally Posted by jeff View Post
    I have a Bontrager Crowbar with the built in cross brace. I'll measure when I get home if interested.
    Yeah, if you don't mind checking I'd be interested.

    I'd prefer to go vintage over modern if possible.
    Each bicycle owned exponentially increases the probability that none is working correctly.

  55. #55
    Stokeless Asshat
    Reputation: jeff's Avatar
    Join Date
    Jan 2004
    Posts
    3,346
    Pretty hammered. Logo rub but straight, no dings. 25" Free if you want em and not offended if you don't.



    Quote Originally Posted by laffeaux View Post
    Yeah, if you don't mind checking I'd be interested.

    I'd prefer to go vintage over modern if possible.
    Attached Thumbnails Attached Thumbnails Thread for Wanted Items for Vintage MTB Only-img_3608.jpg  

    Thread for Wanted Items for Vintage MTB Only-img_3609.jpg  

    Zip ties? Not on my bike!

    Want:
    650B rims or wheel set. 80's vintage 32 or 36 x 135mm

  56. #56
    mtbr member
    Reputation:
    Join Date
    Dec 2015
    Posts
    68
    Hi, I am still looking for a Salsa P10 stem 1" quill ... or can someone give me the exact measurements for a rebuild.
    Thanks, Marco (from Berlin/Germany)

  57. #57
    gobsmacked Moderator
    Reputation: girlonbike's Avatar
    Join Date
    Apr 2008
    Posts
    8,685
    Quote Originally Posted by caemis View Post
    Hi, I am still looking for a Salsa P10 stem 1" quill ... or can someone give me the exact measurements for a rebuild.
    Thanks, Marco (from Berlin/Germany)
    I think try the Salsa thread here. There's a jpg of a pamphlet with the measurements. Try google. Should come up.

  58. #58
    mtbr member
    Reputation:
    Join Date
    Sep 2004
    Posts
    963
    Looking for a 22.2 bontrager quill stem for 25.4 bar,130-135 reach low rise.

    Thanks!

  59. #59
    mtbr member
    Reputation:
    Join Date
    Nov 2012
    Posts
    249
    I have an AMP fork if anyone is interested..

  60. #60
    used to be uno-speedo....
    Reputation: dirtdrop's Avatar
    Join Date
    Dec 2003
    Posts
    1,270
    I'm looking for the below groupset or individual parts (or a donor bike) in good condition. Please PM if you have any for sale.

    Brakes: Campagnolo Record OR
    Brake Levers: Campagnolo Record OR
    Front Derailleur: Campagnolo Record OR, bottom pull, adjustable 28.6-33mm clamp version
    Headset: Campagnolo Record OR, 1 inch threaded
    Rear Derailleur: Campagnolo Record OR
    Derailleur Cables: Campagnolo Record OR
    Cables: Campagnolo Record OR
    Cassette: Campagnolo Record OR
    Chain: Campagnolo Record OR
    Cranks: Campagnolo Record OR with matching chainrings
    Bottom Bracket: Campagnolo Record OR
    Pedals: Campagnolo Record OR
    Seatpost: Campagnolo Record OR, 29.4mm
    Hubs & Skewers: Campagnolo Record OR

  61. #61
    mtbr member
    Reputation:
    Join Date
    May 2014
    Posts
    204
    Quote Originally Posted by N10S View Post
    Looking for a 22.2 bontrager quill stem for 25.4 bar,130-135 reach low rise.

    Thanks!
    Almost positive I have that stem. PM me and I'll check when I get home from work.

  62. #62
    mtbr member
    Reputation:
    Join Date
    Jun 2012
    Posts
    116
    Quote Originally Posted by stingray230sx View Post
    looking for a few skewers
    one front m730 [100mm] has the rubber handle-still need this!!
    One or two sets m737 [100/135] let me know what you got-one set purchased and still looking for second set

    thanks
    all found thanks

  63. #63
    mtbr member
    Reputation:
    Join Date
    Jun 2012
    Posts
    116
    Looking for a bolt on Vbrake shock brace for a judy xc in champagne/silver, please and thanks
    Last edited by stingray230sx; 09-02-2016 at 01:42 PM. Reason: Spelling

  64. #64
    gobsmacked Moderator
    Reputation: girlonbike's Avatar
    Join Date
    Apr 2008
    Posts
    8,685
    Just a reminder. Big ticket items like frames wanted or for sale doesn't belong in these small ticket items threads. You still need to take out an ad here:

    WANTED: Wanted Bikes and Frames - Buy and Sell Mountain Bikes and Accessories
    FOR SALE: Vintage Bike - Buy and Sell Mountain Bikes and Accessories

    Ads are now free! FREE!! FREEEEEEE!!!

    Thanks. It's in the stickies...

    For best visibility, fill out a classifieds ad, start a new thread in the VRC forum and the now not-so-new policy is to not lock them so people can comment but the OP may not excessively bump their own threads.

    Piggybacking in photo threads with wanted or for sale spam will get those posts deleted. Those threads are to celebrate the bikes, not hawk them.

  65. #65
    mtbr member
    Reputation: tductape's Avatar
    Join Date
    Mar 2008
    Posts
    2,380
    Chris King, Black, 1" 2nut. I just need the top nut for my CK headset. Currently substituting a Shimano on there and it is driving me batty.

    CBR crank caps in black.

    Hite Rite, large Black (I have several in silver).

    That is all.
    Last edited by tductape; 09-03-2016 at 01:42 PM.
    Seek: Koski Trailmaster. Breezer Series 2 or 3. Cunningham Racer.

  66. #66
    artistic...
    Reputation: colker1's Avatar
    Join Date
    Jan 2004
    Posts
    7,097
    have- Fat City rigid orig. threaded fork for wicked 18in. color is metallic purple.

    want- light, high end steel, 415/420mm fork w/190mm (at least) unthreaded 1 1/8 steerer.
    WTB: Bomber Z2 1 1/8 steerer, in good to excellent shape OR bomber rebuild kit.

  67. #67
    mtbr member
    Reputation: fat tire trader's Avatar
    Join Date
    Sep 2010
    Posts
    101
    Attn. Dirtdrop,
    I have a single Campag cantilever. Do you have any parts to trade? I'm collecting parts to build a Rossin MTB.

  68. #68
    acoustic motorbike
    Reputation: apexspeed's Avatar
    Join Date
    Jul 2004
    Posts
    166

    Thread for Wanted Items for Vintage MTB Only

    Found.
    Last edited by apexspeed; 09-16-2016 at 04:47 AM.
    .
    2003 Serotta Fierte Cyclocross
    2008 Turner Flux
    2000 Gunnar Rockhound


  69. #69
    artistic...
    Reputation: colker1's Avatar
    Join Date
    Jan 2004
    Posts
    7,097
    want- Ibis titanium Hbar.

    xtr m950 v brake levers.

    king classic rear hub. 135mm.

    Selle Italia Turbomatic> can't have enough of those.
    Last edited by colker1; 09-06-2016 at 06:33 AM.
    WTB: Bomber Z2 1 1/8 steerer, in good to excellent shape OR bomber rebuild kit.

  70. #70
    mtbr member
    Reputation:
    Join Date
    Jul 2010
    Posts
    620
    Quote Originally Posted by girlonbike View Post
    Piggybacking in photo threads with wanted or for sale spam will get those posts deleted. Those threads are to celebrate the bikes, not hawk them.
    That was my favorite pastime back when Classifieds cost $2. I recall celebrating a certain 1990 Spec Stumpy that I also had for sale somewhere else, coincidentally!

  71. #71
    artistic...
    Reputation: colker1's Avatar
    Join Date
    Jan 2004
    Posts
    7,097
    Quote Originally Posted by klasse View Post
    That was my favorite pastime back when Classifieds cost $2. I recall celebrating a certain 1990 Spec Stumpy that I also had for sale somewhere else, coincidentally!
    Weren't you celebrating an Ibis Titanium that was sold too? Good job.
    WTB: Bomber Z2 1 1/8 steerer, in good to excellent shape OR bomber rebuild kit.

  72. #72
    mtbr member
    Reputation:
    Join Date
    Jul 2010
    Posts
    620
    Quote Originally Posted by colker1 View Post
    Weren't you celebrating an Ibis Titanium that was sold too? Good job.
    yeah show me an Ibis Ti that has never been sold. duh

  73. #73
    Sergeant Spandex
    Reputation: lewisfoto's Avatar
    Join Date
    Nov 2013
    Posts
    665
    I need a 26.4 seat post for my Wicked, I have Kalloy on the way so I can get it back on the trail but would love something nicer???
    Attached Thumbnails Attached Thumbnails Thread for Wanted Items for Vintage MTB Only-wicked-cracked-post.jpg  


  74. #74
    mtbr member
    Reputation:
    Join Date
    Dec 2015
    Posts
    68
    Quote Originally Posted by caemis View Post
    Hi, I am still looking for a Salsa P10 stem 1" quill ... or can someone give me the exact measurements for a rebuild.
    Thanks, Marco (from Berlin/Germany)
    Hi, the planned rebuild doesn't work (at least not here in Germany), so still looking for the stem above...
    Thanks!

  75. #75
    Stokeless Asshat
    Reputation: jeff's Avatar
    Join Date
    Jan 2004
    Posts
    3,346
    I found 26.4 Control Tech to be the only post that size that would hold up on my Fat.
    Quote Originally Posted by lewisfoto View Post
    I need a 26.4 seat post for my Wicked, I have Kalloy on the way so I can get it back on the trail but would love something nicer???
    Zip ties? Not on my bike!

    Want:
    650B rims or wheel set. 80's vintage 32 or 36 x 135mm

  76. #76
    mtbr member
    Reputation:
    Join Date
    Oct 2015
    Posts
    282
    Hite Rite, large Black (I have several in silver).

    - td, I've got one laying around collecting dust, black large - gratis, if you're Bay Area or close shipping free too. I have a couple, but can't quite get them dialed in right, I'm obviously no bike mech.

    Cheers, Ben

  77. #77
    mtbr member
    Reputation:
    Join Date
    Jun 2016
    Posts
    16

    Marin lite/titanium parts

    EARLY MARIN LITE / TITANIUM PARTS!

    Hi, I've got a couple of early (92/93) top end marins that I'm building up in a kind of mid life crisis reliving my youth kind of way!! I'm looking for any interesting or rare parts titanium included, seat posts, seats & stem, did I say any Ti parts would be nice?!!!

    I'm in the UK but don't let that put you off! I have 100% ebay feedback and my username on Retrobike | Retro, Vintage and Classic Mountain, Road and BMX bikes is shawnb for some reassurance !

    Thanks
    Shawn.

  78. #78
    mtbr member
    Reputation:
    Join Date
    Dec 2015
    Posts
    68
    Hi,
    does anyone have a pair of WTB Toe Flips left over? Thanks, Marco

  79. #79
    mtbr member
    Reputation:
    Join Date
    Apr 2014
    Posts
    63
    Seeking rear axle for WTB classic 135mm rear FW hub. I have the end caps. Old axle was bent, then lost. :-(

  80. #80
    Old School
    Reputation: Joe Steel's Avatar
    Join Date
    Dec 2003
    Posts
    1,039
    I need a single, Magura vinyl brake lever dust cover. The one that snaps on. Not the rubber version. Thanks!

  81. #81
    mtbr member
    Reputation: Williwoods's Avatar
    Join Date
    May 2004
    Posts
    1,004
    Looking for:

    Bontrager Mag21 crown in good shape
    White Industries USA made CNC 110 CBD Cranks

  82. #82
    the new Gilbert Grape
    Reputation: laffeaux's Avatar
    Join Date
    Jan 2004
    Posts
    5,827
    Looking for a fillet brazed Ritchey quill stem (not bullmoose) in size 130 or 140mm. Got anything?

  83. #83
    rismtb
    Reputation:
    Join Date
    Dec 2012
    Posts
    492
    not fillet but newer 130mm tig possibly to get you going
    Attached Thumbnails Attached Thumbnails Thread for Wanted Items for Vintage MTB Only-img_1688.jpg  


  84. #84
    mtbr member
    Reputation:
    Join Date
    Apr 2016
    Posts
    375
    Quote Originally Posted by rismtb View Post
    not fillet but newer 130mm tig possibly to get you going
    If laffeaux doesn't need it, let me know how much you need please.

    Sent from my SM-N920V using Tapatalk

  85. #85
    mtbr member
    Reputation: datasurfer's Avatar
    Join Date
    Nov 2006
    Posts
    313
    "might be able to help you with those brakes but there's a chance it's the later goldish finish. It will take a few days before I can dig in to the box though."

    "Cool, keep me posted. The levers I have are the goldish finish, so that could work out well. We could work out a trade, but I'd owe you something to balance the deal."

    --------

    Jeff, did you and Rumply ever do this trade? If not I am interested in your gold finish Ritchey brakes.

  86. #86
    mtbr member
    Reputation: datasurfer's Avatar
    Join Date
    Nov 2006
    Posts
    313
    Quote Originally Posted by Williwoods View Post
    Looking for:

    Bontrager Mag21 crown in good shape
    White Industries USA made CNC 110 CBD Cranks
    I may have the crown you are looking for, however it has some brake cable rub. Otherwise OK.

  87. #87
    the new Gilbert Grape
    Reputation: laffeaux's Avatar
    Join Date
    Jan 2004
    Posts
    5,827
    Quote Originally Posted by rismtb View Post
    not fillet but newer 130mm tig possibly to get you going
    Thanks for the offer, but I really need the fillet brazed version. I have a stem that will work until I find the right one.

    Hopefully dubya3 can use it.
    Each bicycle owned exponentially increases the probability that none is working correctly.

  88. #88
    mtbr member
    Reputation: datasurfer's Avatar
    Join Date
    Nov 2006
    Posts
    313
    Quote Originally Posted by lewisfoto View Post
    I need a 26.4 seat post for my Wicked, I have Kalloy on the way so I can get it back on the trail but would love something nicer???
    I have a 26.4 Interloc if u r interested.

  89. #89
    mtbr member
    Reputation: datasurfer's Avatar
    Join Date
    Nov 2006
    Posts
    313
    Quote Originally Posted by Mr. Claus View Post
    not looking for much, but maybe rare?

    1 - Gravity Research "rim crusher" brake (front or rear, but I don't think it matters)

    Not too much great to trade, but good shape rear/front M735 derailleurs and v brakes, Easton hyperlite bars, 2013 Syntec 27.3 carbon post...
    Have the "Rim Crusher" (front), Pipe Dreams (rear) and cantilever levers in red if you are interested and have some commensurate items to trade...

  90. #90
    rismtb
    Reputation:
    Join Date
    Dec 2012
    Posts
    492
    where would you like this mailed? how fast do you want would depend on shipping over the 20 for stem if you still want

  91. #91
    mtbr member
    Reputation:
    Join Date
    Apr 2016
    Posts
    375
    Quote Originally Posted by rismtb View Post
    where would you like this mailed? how fast do you want would depend on shipping over the 20 for stem if you still want
    Cheapest mail would be fine, unless it fits in a $6 small priority box. I'll talk to the wife tonight and see if we still have access to PayPal (haven't used it in forever), assuming you use that method. Otherwise I can drop $25- $30 or usps money order in the mail to you.

    I'll get back to you this evening

    Sent from my SM-N920V using Tapatalk

  92. #92
    mtbr member
    Reputation:
    Join Date
    Apr 2016
    Posts
    375
    It's from around 2000 so it's not quite vintage but I'd love to find one or two more of these old Specialized BG saddles. I was told this one was a take off from a Rockhopper

    Sent from my SM-N920V using Tapatalk

  93. #93
    gobsmacked Moderator
    Reputation: girlonbike's Avatar
    Join Date
    Apr 2008
    Posts
    8,685
    lets try to keep this thread vintage only. otherwise, the purpose of this thread gets lost. great stuff for people to buy/sell/trade so far. thanks to all who've offered their stuff.

  94. #94
    VRC Illuminati
    Reputation: Rumpfy's Avatar
    Join Date
    Dec 2003
    Posts
    17,574
    Quote Originally Posted by datasurfer View Post
    "might be able to help you with those brakes but there's a chance it's the later goldish finish. It will take a few days before I can dig in to the box though."

    "Cool, keep me posted. The levers I have are the goldish finish, so that could work out well. We could work out a trade, but I'd owe you something to balance the deal."

    --------

    Jeff, did you and Rumply ever do this trade? If not I am interested in your gold finish Ritchey brakes.
    Dang, where ya been H?
    -eric-

    http://www.rumpfy.com
    Wanted: NDS Suntour XC Pro Microdrive 175mm Crank Arm.

  95. #95
    mtbr member
    Reputation:
    Join Date
    Oct 2015
    Posts
    282
    Quote Originally Posted by datasurfer View Post
    Have the "Rim Crusher" (front), Pipe Dreams (rear) and cantilever levers in red if you are interested and have some commensurate items to trade...
    Oh man, that's fantastic DS. I could really use the gravity research rim crusher brake. I'm a bit light on trade items, what are you looking for? Would you mind sending me a pic in a PM? I'm sure we can work out some kind of trade. I have a nice control tech jimmy stop brake, and a WTB (I think American made, but I can send pics) speedmaster canti brake, odd older Ti specialized stem (threadless 1 1/8", look them up they're actually quite nice)....let me know what you think. Cheers, oh and are you a Bay Area person?

  96. #96
    mtbr member
    Reputation: datasurfer's Avatar
    Join Date
    Nov 2006
    Posts
    313
    Quote Originally Posted by Rumpfy View Post
    Dang, where ya been H?
    Hey E! Missed you guys too! Been spending half my time in WA/OR expanding my business. Hasn't left a lot of time for my vintage bike fetish lately ;-)

  97. #97
    mtbr member
    Reputation:
    Join Date
    Nov 2012
    Posts
    249
    delete
    Last edited by BikeBro; 11-08-2016 at 12:50 PM.

  98. #98
    mtbr member
    Reputation:
    Join Date
    Feb 2006
    Posts
    142
    Anyone has parts for a Gary Fisher RS-1? I need the elastomers for the rear 'shock', or suggest replacement options? Thanks

  99. #99
    Stokeless Asshat
    Reputation: jeff's Avatar
    Join Date
    Jan 2004
    Posts
    3,346
    I totally flaked on him. Now they're on my neighbors bike.
    Quote Originally Posted by datasurfer View Post
    "might be able to help you with those brakes but there's a chance it's the later goldish finish. It will take a few days before I can dig in to the box though."

    "Cool, keep me posted. The levers I have are the goldish finish, so that could work out well. We could work out a trade, but I'd owe you something to balance the deal."

    --------

    Jeff, did you and Rumply ever do this trade? If not I am interested in your gold finish Ritchey brakes.
    Zip ties? Not on my bike!

    Want:
    650B rims or wheel set. 80's vintage 32 or 36 x 135mm

  100. #100
    mtbr member
    Reputation: Williwoods's Avatar
    Join Date
    May 2004
    Posts
    1,004
    possibly. what are you trying to get for it? how are the sidewalls on those rims? I see the raw hub come up for sale every once in a while.

Page 1 of 2 12 LastLast

Similar Threads

  1. Replies: 4
    Last Post: 08-26-2013, 12:21 PM
  2. viewing unread posts within a thread?
    By icycle in forum Site Feedback/Issues
    Replies: 1
    Last Post: 10-24-2011, 08:27 AM
  3. Thread spacing for cantilever posts? help
    By ncal408 in forum 29er Bikes
    Replies: 5
    Last Post: 05-30-2011, 07:32 PM

Members who have read this thread: 224

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •