Page 4 of 29 FirstFirst 1 2 3 4 5 6 7 8 14 ... LastLast
Results 76 to 100 of 703
  1. #76

  2. mtbr member
    Reputation:
    Join Date
    Mar 2011
    Posts
    84
    had to repost my list wouldnt let me edit it and I have dug out my old stash.....
    Have;
    Scott Unishocks Elastomer grey shocks 1" threaded steerer (these are the recalled ones it should be noted)
    Profile Bar None race aluminum handlebar 138grams circa 94
    Ritchey Logic red clipless original version
    Mavic 230 anodized rims unlaced 32h
    Mavic 231 Hard anodized rims unlaced 32h
    Nishiki road frames (mens and womens) lugged steel (late 60 early 70's)
    27" wheelsets (2) steel rims with high flange qr hubs
    tons of road stuff stems,shifters bars etc.
    old Condor saddle
    old generator light set 60's
    Shimano Eagle rear derailleur
    Shimano Thunderbird front derailleur
    Shimano Exage front derailleur (1988)
    Shimano Exage Mountain Thumbies (1988)
    Shimano Mountain LX Biopace Crankset 175 28/38/48 (1988)
    Exage Wide Cantilevers (1988)
    Exage Brake levers (1988)
    Exage Biopace crankset 175 28/38/48 (1987)
    Michellin Wildgripper Lite S front and rear tires Folding green (heavy dry rot and fraying of skinwalls but intact bead I have them mounted and up to pressure)
    Smoke and Dart Folding (fraying of skinwall but intact bead)
    Smoke and Dart Steel bead (fraying of skinwall but intact bead)
    Specialized Rockhopper Comp (1989) complete only thing not original is tires. The seat will need replaced though as its basically faded and ripped. Looks like a 16-17 frame
    Scwinn clear creek mtn frame 20-21

    wanted;
    usable 1" suspension fork
    prefer manitou original or 2,3,comp want a cnc one
    or working mag 20 or Marzocchi from that period as well

    Shimano XT m735 front derailleur top pull 34.9

  3. #78
    mtbr member
    Reputation:
    Join Date
    Apr 2011
    Posts
    49
    no thanx, i just want the same ritchey in a 16 size

  4. #79
    mtbr member
    Reputation:
    Join Date
    Sep 2010
    Posts
    623
    Ok, will try to keep it simple this time..

    Have - 1 set of suntour xc pro thumb shifters, 1 set of shimano deore thumb shifters
    Want - a disc/rim compatible 650b front wheel/tire

  5. #80
    mtbr member
    Reputation: DoubleCentury's Avatar
    Join Date
    Nov 2005
    Posts
    1,265

    Salsa Frame Trade?

    I have two Salsa Ala Cartes, both in a 17" frame size, measured center to top. The toptubes are 22.16" and the headtubes are 1". I am guessing they are both 1996 vintage.

    I would like to trade one of these frames (your choice) for the next size up or maybe even the next size after that so that my dirtdrop setup is more upright.

    Salsa sizing can be found here: http://mombat.org/95Salsa9.JPG

    Photobucket

    Photobucket

  6. #81
    mtbr member
    Reputation:
    Join Date
    Apr 2006
    Posts
    281
    I love that drop bar Ala Carte.

  7. #82
    mtbr member
    Reputation: DoubleCentury's Avatar
    Join Date
    Nov 2005
    Posts
    1,265
    It's now being used to pull kids in a Burley trailer. Seriously.

  8. #83
    mtbr member
    Reputation:
    Join Date
    Feb 2007
    Posts
    293

    Klein Attitude 1992

    Have: 1992 Klein Attitude 22" in Horizon Linear Fade. Excellent condition, just picked up from the original owner.

    Want: Same but in a 20" frame size.

    Prefer to simply swap fuselages/MC handlebar and fork.

  9. #84
    hmmm.
    Reputation: David9999999's Avatar
    Join Date
    Sep 2008
    Posts
    145
    Want:
    Dia Compe 986 brakes (for one wheel)

    Have:
    Deore LX cantilevers (for one wheel)
    Deore LX front trigger shifter/brake lever combo
    other misc...

    And... Bike trade anyone?

    Want:
    Large/medium frame Raleigh Technium Peak
    Have:
    Large frame DBR Vertex with a mix of parts, XT/XTR/Sram Neos/Mavic/RockShox Judy SL

  10. #85
    used to be uno-speedo....
    Reputation: dirtdrop's Avatar
    Join Date
    Dec 2003
    Posts
    1,238
    Want: Salsa Moto Bar in silver / chrome

    Have: Various M900 components

  11. #86
    mtbr member
    Reputation:
    Join Date
    Apr 2010
    Posts
    75
    Have: Specialized BX25 wheels laced to Exage hubs; black rims. The front wheel brake service looks like the previous owner hardly ever used it! Rear wheel the black anodizing on the braking service has gone through most of the black anodizing, but these wheels are in fantastic shape. No rust, spin true.

    Have: OEM Specialized Ground Control "Black Max" 26 x 1.95 tires. These tires are in phenomenal shape, and you can tell they never saw a corner! Hairs are still standing crisp and tall on all but the knobs on the center of the tire. This is the Black Max version, the one that still has an actual sidewall, but it is colored black.

    Wheels and tires came from a 1993 Rockhopper that looks like it has been sitting on the garage hooks I got it off of since the week it was purchased!

    This bike is going to be a rider, so I thought I'd offer them up for trade in case someone that is looking for some "used minty" parts for their restoration ride.

    Want: Make offers, but basically want a replacement wheelset and tires- VRC or Modern; this Rockhopper is going to be seeing Western Michigan singletrack.
    -Kevin

    Wanted: 102bcd 4 bolt (M960) SS chainring in 32t or 34t variety

  12. #87
    mtbr member
    Reputation:
    Join Date
    Apr 2010
    Posts
    75
    Pics of front wheel with Shimano HB-RM50 hub and Ground Control Tire:





    -Kevin

    Wanted: 102bcd 4 bolt (M960) SS chainring in 32t or 34t variety

  13. #88
    mtbr member
    Reputation:
    Join Date
    Apr 2010
    Posts
    75
    Pics of Rear wheel with Shimano FH-HG50 hub and hyperglide 13-30 cassette with Ground Control Tire:







    -Kevin

    Wanted: 102bcd 4 bolt (M960) SS chainring in 32t or 34t variety

  14. #89
    gobsmacked Moderator
    Reputation:
    Join Date
    Apr 2008
    Posts
    7,143
    Have you tried to pull those rusted cogs off? Have you considered donating that wheel?

  15. #90
    mtbr member
    Reputation:
    Join Date
    Apr 2010
    Posts
    75
    huh?!
    -Kevin

    Wanted: 102bcd 4 bolt (M960) SS chainring in 32t or 34t variety

  16. #91
    mtbr member
    Reputation:
    Join Date
    Apr 2006
    Posts
    281
    As a former West-Michigander (Muskegon) I'll do my best to explain. If you've watched this forum for a period of time you might have noticed that there is a difference between "vintage" and "old". Vintage connotes something that when new, was valuable/rare/interesting/unique in some way that by virtue of being old becomes even more desirable. Old is something which when even was new was run of the mill and/or low end and by "virtue" of being old becomes less desirable. Most of what gets interest on this forum are bikes and parts that have some historical value and/or were hand-built in very small numbers.

    What you have on your hands is a wheelset/bike that falls firmly in the "old" category. The Rockhopper was on the low end of what Specialized offered and was built in super high numbers. If that wheel was immaculate your posting would generate at best a polite non-comment. But frankly, that wheel is far from immaculate. The cassette looks really rusty and the brake surface is worn through. On a forum where clean, hand-built bikes that retailed for 2G+ in 1993 get routinely trashed (see the Klein thread for my a recent, hilarious example) a rusty wheel off a bike that retailed for $500 is likely to see a bit of abuse.

    Not to disparage your ride or anything, any bike out on the trails is a good thing. Its just not going to be something that most on this forum are going to want to pay the shipping to acquire. I'd say keep the wheels and ride them until they give up the ghost. Yankee Springs was always my WM fave for that.

  17. #92
    gobsmacked Moderator
    Reputation:
    Join Date
    Apr 2008
    Posts
    7,143
    Well, personally, I have nothing against rockhoppers. I think they make perfectly solid riders and commuters. I just think that wheel is in bad shape and wheels are expensive to ship. Probably more expensive than the wheel is worth. If I had it, I would sell the tire and throw the rest of it in the trash or donate it the whole thing. The tire itself is in good shape but it's blackwall and also narrow.

  18. #93
    mtbr member
    Reputation:
    Join Date
    Sep 2004
    Posts
    1,540
    Wanted

    XTR Octalink BB English 112.5mm can be m950 or m952.
    XT m750 crankset 5 bolt (preferred) or 4 bolt, this was the last square taper XT model. Cranks can be in bad shape I just need the spider.
    I am trying to switch my kids buck shaver to 165mm cranks without spending too much more money. I have the arms but somehow missed the last of the bbs...

    Have to trade (assuming I get the above)
    170mm race face turbine lps 94/58 black.
    Tange 110mm square taper bb.
    Real Design square taper bb 107mm.
    Modern Shimano 9 speed cassette, low end but 11-34.
    sram x7 front derailleur.
    and lots of other stuff.

  19. #94
    mtbr member
    Reputation:
    Join Date
    May 2008
    Posts
    28

    KLEIN Linear Fade

    Will Trade This Frame For........
    Attached Images Attached Images  

  20. #95
    mtbr member
    Reputation:
    Join Date
    Feb 2011
    Posts
    236
    Want:
    wtb rm02 25.6
    Thomson 31.8x40 silver or similar
    Chris King 1" headset no logo black


    Have:
    wtb rm02 26.0
    Suntour rollercams 1 generation linear spring - nos cb6000?
    Thomson 31.8 black
    Chris King 1" headset no logo silver
    Last edited by Machianera; 06-04-2011 at 07:24 AM.

  21. #96
    mtbr member
    Reputation: Williwoods's Avatar
    Join Date
    May 2004
    Posts
    989
    Have: Sid 98 1 1/8" threadless in good working shape. Holds air. (will measure steerer later)

    Want: Straight blade rigid fork with suspension corrected geometry, such as a Kona P2 in 1 1/8" threadless (fairly long steerer needed) also would like a nice quality threadless headset to go with it.
    Last edited by Williwoods; 06-01-2011 at 12:16 PM.

  22. #97
    Doesntplaywellwithmorons!
    Reputation: DeeEight's Avatar
    Join Date
    Jan 2004
    Posts
    10,571
    Quote Originally Posted by lucifer View Post
    Wanted

    XTR Octalink BB English 112.5mm can be m950 or m952.
    XT m750 crankset 5 bolt (preferred) or 4 bolt, this was the last square taper XT model. Cranks can be in bad shape I just need the spider.
    Ironically I have a set of those cranks but with the XTR 4-arm spider/ring set mounted I keep meaning to sell/trade/get rid of.

    I do have several of the aftermarket 4-arm 104/64 spiders that were made for those cranks still though.
    I don't post to generate business for myself or make like I'm better than sliced bread

  23. #98
    Doesntplaywellwithmorons!
    Reputation: DeeEight's Avatar
    Join Date
    Jan 2004
    Posts
    10,571
    Have : A very good condition 1995 Marzocchi XC600 air/oil fork, the one with the 4 position compression damping adjuster and the drilled lowers. It has a 1 1/8 threaded steerer, about 7.25" long.

    Want : Make me an offer of something.
    I don't post to generate business for myself or make like I'm better than sliced bread

  24. #99
    Certified Bike Junkie
    Reputation: muddybuddy's Avatar
    Join Date
    Jan 2007
    Posts
    1,737
    have:
    -----'95 Ibis Szazbo frame medium
    -----Ritchey Fillet Brazed stem. 150mm x ~7* In black chrome finish, couple small
    scratches, but almost perfect.
    -----Bontrager Composite fork (the one with the fat legs) 1" steerer x 177mm some
    scrapes and scuffs, but overall very presentable.


    want:
    -----> late 80s to early 90s new england/east coast xc orientated frame i.e. Brave Racer,
    Grove Assault, Fat Wicked Lite,... possibly Slingshot or early Ti frame 20"
    or "large".

    -----> FTW or Yeti stem 1-1/4 10-15* x 135-140mm

    -----> old style IRD post 26.8 black


    Szazbo frame is in good condition. Size "Medium" with a 23" top tube. Derr hanger was tweeked when I got it and I had it straightened by a professional mechanic using the proper Park tool. Looks straight and solid. Finish is ok but it does have some scraps and scuffs. Decals are rubbing off in places. The shock spring has a little rust showing through the finish. I'll also include the Judy DH (80mm travel), Control Tech post and Aheadset headset. Fork looks like it needs a rebuild and new elastomers and the finish is bubbling a little on the front so the finish is probably on its way out. Post looks solid with some rusting on the bolts and the upper 4-5" are faded more than the lower portion.
    Attached Thumbnails Attached Thumbnails Official VRC 'Trade Only' Thread (no for sale items allowed) Part 2-szazbo.jpg  

    Official VRC 'Trade Only' Thread (no for sale items allowed) Part 2-szazbo-1.jpg  

    Official VRC 'Trade Only' Thread (no for sale items allowed) Part 2-szazbo-2.jpg  

    Need: McMahon brake for roller cam mounts, Mountain Goat fork.

  25. #100
    used to be uno-speedo....
    Reputation: dirtdrop's Avatar
    Join Date
    Dec 2003
    Posts
    1,238
    I have an '87 brown suede Turbo in very good condition and I am hoping to do a trade for a black Turbo saddle of the same vintage and condition.


Page 4 of 29 FirstFirst 1 2 3 4 5 6 7 8 14 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •