Hmm...good luck finding either of those. I would also like a brooks chair though. Sounds comfy.
Originally Posted by rismtb
Black Ringle Hollie Skewer set in black.
Ringle 32h SuperDuper Bubba/SuperDuperEight Hubset in Black.
Both in Nice shape.
I need front and rear
Minty XTR M900 derailliuers.
TNT Ti rear Hub
WTB New Paradigm rear hub
WTB Classic front hub
Suntour AP11 chain (for XC Pro)
Nice 170mm cranks
I have silver NOS Control Tech Canti's that I would trade for Black NOS Control Tech Canti's
Have more than I need, although want deer head front and rear. God bless Marco
I am looking for any length steerer I am going to cut the crown off and install it on a bontrager judy crown. Not picky on color just want in good to better riding shape. Do not care too much about the cosmetics of the fork so long as the function is good.
Meant for this to be a pm response to gentleman on last page sorry.
Last edited by pugslybell; 03-05-2013 at 09:05 AM.
Trades only. Please edit.
Originally Posted by pugslybell
Have: '99 Klein Mantra medium frame (white aluminum boom, base model) in used condition (scratches, chips, but no dents or cracks).
Want: Compatible small Mantra frame (or just trade the boom since the small/med used the same rear triangle).
Yeah, I must be mistaken.
Anyone interested in some Bullmoose Bars ? There are 3, one of which is blue/threadless (1"), and the other 2 are silver/quill. I'd like to find a
Salsa Chromoto Riser Bar or perhaps a Ti Riser. I'd throw in some extra items for a ti riser bar.
Here's what I have to trade these days --
ACS 2 speed Bmx Freewheel - 16/17 tooth
Answer Pro Taper Carbon Riser Bar - Used but clean
Azonic O.R.S. Stem 25.4, 90mm
Bontrager Seat Post 31.6, 350mm
FSA Afterburner cranks - 4 bolt (64/104mm bcd)
IRD Seatpost 27.0x350mm
Jamis Chromoly Riser Bar
Kona Project Two forks - 2, one from a 20" frame, one from a 15-16" frame, both 1x1/8, threaded
Marinovative Decelerators - Missing springs/straddle cable
NOS Crud Claw
Park Frame alignment gauge
Scott Pedersen SE Cantilever Brakes
Shimano Deore Xt M732 braze-on front derailleur, new in box.
Shimano Lx crankset, splined, 4 bolt
Soma 100mm stem 1x1/8
Sram x-7/x-5 derailleurs. mid/long cage
Sram x-5 rear shifter
Suntour A-Type Cogs: 22, 24, 28.
Suntour MD Xc Expert Crankset - 20/32/42
Tange Big Fork 1x1/8, 250mm steer tube, threaded
Tioga Chromoly Seat Post 27.0x300mm
Titanium Handlebar - flat, 22" wide, unbranded
Truvativ Stylo Riser Bar 20mm rise, 31.6, 680mm, 9 degree
Truvativ Seatpost 30.9x400mm
26" Tires - new or mint condition :
Kenda Kharisma xc racing tire
Maxxis Maxxlite 310 gram racing tire
Schwalbe Fast Fred 359 gram racing tire
27.5 inch tires (650b) - mint condition
Kenda Nevegal 2.1
Pacenti Quasi Moto 2.0
Here's what I am looking for --
Bmx handlebar - 5-6" rise, 10+ degree sweep. 26"+ wide.
Bear Trap Style pedals, Xc Pro, Victor, etc.
Brake lever extensions for bar ends - Kona Dr Dews/Paul Chim Chims/Other
Brake levers - want levers that are linear pull, good quality, light.
2 pairs of long v-brakes, levers optional. Clearance for 650b tires. Cane Creek Direct Curve 5 would be great.
Titanium Bar Ends
Titanium Riser Bar - Titec, White Bros ?
Titanium Seatposts - 27.0mm and 27.2mm
Mtb crankset - quality vintage 74/110mm bcd or 58/94
36/38 tooth rear cog
Inexpensive spedometers 1-3 needed
Large 24" bmx cruiser frame. I need something with a seat tube that's 12-14 inches long
Dropper seatpost. Prefer handlebar remote. 27.2
XTR chromoly seatpost 27.2 (M900 or M910 ?)
Last edited by phoenixbikes; 03-24-2013 at 12:57 AM.
Got a like new set of 24" Rhyno Lites laced up to Hayes/Hugi disc hubs with Arrow tires. What do I need? Don't really know.
Here's a photo of my parts to trade, will add more soon. Will add additional info on parts as soon as I can, If interested in anything let me know.
Parts to trade:
Manitou 3 - 1 1/4
Ritchey forcelite handlebar
Kore aheadlite stem 1 1/8
Kore stem 1 1/8
Avocet O2 seat titanium
Specialized prolong saddle
Icon stem 1"
Raceface North shore XS square taper cranks 165mm
XTR rapid rise M960
Tioga surefoot VI pedals
Sram ESP 7.0 levers
Lots more to trade, Raceface cranks, suspension forks, handlebars,stems, XTR. If you have anything I'm after, just let me know what your after and I might have it.
Im looking for:
Old 90's Rocky Mountain bike
Rear purple Ringle Super Eight hub
Rear Blue Ringle super eight hub
Ringle 26.8 Purple/3DV seatpost
1 1/4 Accutrax fork and Atac stem
Yo Eddy rigid fork 1"
90's Syncros parts, especially a set of hubs,rims or chainrings, crankomatic..
Cook bros cranks purple/3DV or black
Kooka Racha levers in Purple/3DV or black
Amp D1 disc caliper
Manitou X vert carbon MRD stem
a set of 90's coloured tires, or skinwall
early to mid 90s short travel (63MM ish) "working" suspension fork (Early SID, Judy XC, Manitou etc) - 1-1/8 threadless steerer
White or silverish rigid fork of same era and A-C (215 mm ish?) - 1-1/8" threadless steerer
(Basically something that will look/work well on this) :
Nitto dirt drop stem (mid or short quill) 26.0mm clamp
XT 7sp rear thumbshifter
PD-A520 SPD road pedals
Selle Italia Flite Ti Genuine Gel saddle (yellow/black)
Tons of assorted gripshift stuff (7sp gripshift road bike shifters anyone?)
Avid Shorty 4 cantilever brakes
Tektro CR720 cantilever brakes
Silver (OE only) Salsa Bell Lap drop bar
Shimano XT 730 170mm cranks
Or other 170mm cranks that used 122.5 bottom brackets
130mm Race Face Deus 1 1/8" threadless stem. 25.4 bar clamp. Looks nice, like a Thomson.
Shimano 16t, 17t MX30 freewheels
ACS Claws 18t, 19t freewheels
16t EAI Track cog
Other things I am after --
Titanium Stems. one 70-80mm, one 120mm.
Titec Hellbent Expert 220 Gram Chromoly Rail Saddle
Titec Ithy's Titanium Rail Saddle
Other light/comfortable titanium rail saddles., especially one with an open relief section.
A few other things up for trade --
A Little Stash Of Rigid Forks (20+) - Threadless, Threaded, mostly rim brake/curved leg. Let me know what you need.
Ritchey Vantage Rim/Suntour Xc Comp Hub Front Wheel
Serfas MR-303 Titanium Rail Saddle with open section
Salsa Chromoly Stem 110mm, threadless, 1x1/8
Two titanium seatposts, both 27.2. American Classic/J&L
Also, these two somewhat strange bars----
Last edited by phoenixbikes; 04-04-2013 at 11:00 PM.
I've got a 2002(?) Manitou Six Deluxe fork, in 1" with a 183mm threadless steerer (starnut installed). It's the 80mm travel version. I bought it used a long time ago and never used it. As far as I can tell it is in perfect order, although I've never had it on a bike.
Offer me something for it if you want it, or PM me a trade list. (black Flite saddle? XTR 8spd cassette? A Merlin Newsboy?)
Don't call it a gooseneck.
Last edited by s4gobabygo; 04-03-2013 at 08:32 AM.
Have: Clear Yeti Speed Grips
Need: Turquoise Yeti Speed Grips (just one actually).
Why would you own 100 Yugos when you could own 1 Porsche? - Rumpfy
- XTR M910 wheels
- NOS IRC Mythos XC 2.1 tires, rustwall (2 pairs front and rear)
- Black Control Tech handlebar (excellent)
- Black Control Tech ahead stem, 1 1/8" x 120mm x 5 (like new)
- Silver Control Tech ahead stem, 1" x 120mm x 0 (like new)
- Race Face Turbines --> one silver 175mm, one black 180mm with rings
- Shimano XT M737 brakes (full set)
- Shimano XT M737 front derailleur, 31.8 BP
- Shimano XT M739 rear derailleur
- Shimano XT M735 front derailleur, 34.9 BP
- Silver Topline cranks, 175mm
- Syncros ahead stem, 1 1/8" x 140mm x 5 (excellent, part of the decal is peeling)
- SDG Comp Ti kevlar saddle (well used)
- NOS Turqoise Onza Chill Pills
- New Chris King 19t cog (new)
- Red Salsa Lip Lock, 35.0 (like new)
Some more stuff in my album: For Sale Photos by mfh126 | Photobucket
- Vintage Slingshot frame/forks 18-19"
- Suntour XC Pro drivetrain
- Dia-compe SS5 levers and 986 brakes
What would Tesco do?
-full set (front & rear) older style Scott / Pedersen SE "Self Energizing" brakeset.
-Suntour XC Pro 7/8sp thumb shifters
-XTR M950 8sp rear derailleur SGS (long cage).
-older Salsa 1" ahead stem (110mm reach x 5-7 degree rise).
Wanted Sid from 98-2005. do not care about steerer length or size doing a judy conversion on it for my 1" Bontrager.
Xtr m 950/952 cranks in a 175
Xtr 8 or 9 speed shifters
Have Kooka Rasta annondized cranks
cooks quality prooducts cranks 176mm
1 avid arch supreme
92 Gt zaskar in a medium full xt 7 speed groupo
7 speed xt thumb shifters
King headset 1 1/8 silver before the logos (threadless)
Have NOS Cook Bros Racing E-type 175 crankset in blue with NOS silver rings 22-32-46.
Looking for NOS Kooka or RaceFace or M739 with NOS rings.
Anyone got any Control Tech Canti's that they'd trade for a set of Control Tech V- Brakes?
Rock Shox Mag 21 crown/steerer - 1 inch threaded x ~6" long (bike head tube is 4.5")
Rock Shox Mag 21 crown/steerer - 1 inch threaded x 5" long
Rock Shox Mag 21 crown/steerer - 1-1/8" inch threadless x 8" long
Rock Shox Mag 21 crown/steerer - 1-1/4" inch threadless x 7.5" long
Each bicycle owned exponentially increases the probability that none is working correctly.
Ritchey fork for '91 Bridgestone
I have a fork with a 6.375" long steerer with about the last 1.75" threaded and I need the same with something closer to a 5" steerer. I can cut and add additional threads, but thought maybe somebody needed a longer steerer and would like to trade.
I might have something like that.
Originally Posted by manzell
Seek: Koski Trailmaster. Breezer Series 2 or 3. Cunningham Racer.
I am on the lookout for a pair of VGC/NOS Mavic X517 or M217 Ceramic rims, 32 hole.
I have the following bits for trade:
M261CD rim 36 hole NOS,
X717 silver rims 32 hole hardly used,
M950 short cage rear mech,
Pauls stoplight cantis.
Last edited by tductape; 04-16-2013 at 09:43 PM.
Seek: Koski Trailmaster. Breezer Series 2 or 3. Cunningham Racer.