Results 1 to 4 of 4
  1. #1
    mtbr member
    Reputation:
    Join Date
    Dec 2006
    Posts
    60

    HELP > Ringle Slamma Jamma

    H E L P

    I need a bearing for a Ringle Slamma Jamma Headset (1 1/8").
    It is for the bottom cup but I think they are the same (top & bottom).

    Your help is much appreciated!

    T H A N K S
    looking for Adroit Strata fork in 21", preferred color = burgundy blue - THANKS

  2. #2
    VRC Illuminati
    Reputation: Rumpfy's Avatar
    Join Date
    Dec 2003
    Posts
    16,834
    Should be a pretty standard size bearing right?

    I sold my Slamma Jamma a while ago so I don't recall for sure.
    -eric-

    http://www.rumpfy.com
    Wanted: NDS Suntour XC Pro Microdrive 175mm Crank Arm.

  3. #3
    mtbr member
    Reputation:
    Join Date
    Dec 2006
    Posts
    60

    slamma jamma ringle

    Thanks Eric,

    What I can do is measure the size of the one bearing in the top cup but I can't measure the height (since it is pretty stuck in the cup...)....
    Is this standard too (so is there a standard ratio in diameter and height)?

    and then: where to get it? ebay? or just any hardware store...? Or do I sound dumb now ?

    does any one have a crappy slamma jamma lying around somewehre from which the bearing is ofcourse not that crappy ?

    help is much appreciated !
    looking for Adroit Strata fork in 21", preferred color = burgundy blue - THANKS

  4. #4
    Neo-Retro Forever
    Reputation:
    Join Date
    Oct 2004
    Posts
    1,573
    take the bearings to a local bearing supplier. There will be a code on the seal, and they should be able to get you a match.

    Look up "bearings" in your local yellow pages or online in your area.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •