Results 1 to 10 of 10
  1. #1
    CBI 2L
    Reputation:
    Join Date
    Dec 2012
    Posts
    145

    1993 Klein Adroit Team Storm

    This reunion has been ten years in the making. I originally bought this frame while still in college back in 1999/2000, can't quite remember. The story goes; bike was being sold by a bike mechanic turned DJ from Seattle who claimed to have been Tinker's mechanic while he raced for Klein. The seller 'claimed' that this was Tinker's back up race bike and was never used. Once his last season with Klein ended he gave the frame to some bike shop in Seattle where this guy ended up working as a full time mechanic. It hung there for several years until the owner either gave it to or this guy bought it from them with the hopes of building it up. He found a fork for it (MC2 fork) and started to work on it but never got very far.

    Now, I took the bike to the Klein factory, talked to the painters (Dale, Kory and others) and nobody really had any good insight, or couldn't remember. The frame is not signed which everybody said meant that Dale painted it since they all took so much pride in those paintjobs that they signed them. More than likely this was an early attempt at the Storm paintjob while Dale was developing it. We all know that the final team bikes had clouds starting on the headtube (on mine they start on the top and seat tubes), the the multi color fade starting with black/purple/pink (orange drops on the team bikes). So this bike lacks the clouds on the headtube and the orange on the dropouts. I'm fairly certain that it was either bike meant for a team rider that never got it, or maybe it was just an experiment that never got fully cooked. The other interesting tid bits are a 4th set of water bottle mounts which is rather uncommon for a normal Klein and the Ti brake bosses and BB spindle (something I've mostly seen on race bikes).

    Anyways, this is how I got it back then:



    Basically frame, MC2 fork, some record OR cranks with a front and rear derailleur. The frame had a few chips on the headtube from some attempts at fork removal and installation, a couple small chips around the dropouts and maybe a few more little nicks here and there. Otherwise it was in great shape. It stayed this way for a long time as I looked for a Strata fork (in hindsight a fool's errand as this bike never would have had a strata, oh well). Along the way I helped to organize a little museum exhibit for Cannondales's homecoming celebration in 2001 and ran into Tinker at the event. He was gracious enough to sign the frame. He didn't have any memory of having a second bike, but for that matter he didn't have much of a memory of any of that stuff. He did end up sending me some unused Mag-21 lowers which are a pretty good (not perfect) match for some of the purple on the frame, so who knows.



    It took me another year if not longer until the bike was complete. I found a Strata fork and MC1 and had them painted to match the frame at CyclART. Along with that they touched up some of the chips and cleared Tink's signature. The rest of the build was a rather uninspiring (by today's standards) M900 XTR I took off of a NOS Specialized Epic Ultimate (which I then sold for OMFG - $300). I did manage to find (can't remember where anymore) a perfectly matching Mag-21 crown and a Klein post with actual Boron fibers inside the tube. That along with the full suite of jerseys, shorts, helmet etc and this is how the bike ended up back then in late 2002/2003.



    Not long after that I lost my job and ended up selling off my entire collection of bikes to stay afloat. One of the very last bikes to go was this one. It sold to a friend on mine in Denmark with the promise that if he decided to sell it he'd give me right of first refusal. He agreed and bought the bike for $4500 which back in 2003 was an astronomical amount for a Klein, even this one.

    Fast forward 10 years. Life got a bit more stable and a couple years ago I renewed my interest in vintage bikes. I've been lucky to find some amazing bikes, but this whole time this bike has been sitting there in the back of my head. Nobody knew where the bike was, the owner was/is not a member of any groups and so the bike has just sat there. After a little bit of research through old email accounts and old friend I was able to track him down and to my surprise he still had the bike. We talked about it and he agreed that he'd sell it back to me at the same price he paid back then. The deal took a little while to ink out but after a couple months this showed up at my house over the weekend:



















    I gave the bike a quick bath, it was covered in cobwebs (still some on hubs), adhesive tape residue and so on. It looks like it hadn't been ridden in over ten years. Basically the same as the day I built it 10+ years ago. Crazy!!

    So, what's next??? Well, I never liked the fork and MC1 and so they'll go. I will actually do the opposite of what everyone wants for their Adroit and remove the Strata and will install the fork I got from Tink and put on a more subtle MC1, either black or maroon/black. I will take a page from Kai's book and build the bike with the same/similar spec that Tinker had back in 93. I've got most of the stuff sitting here and just need to build the wheels and put it together.

  2. #2
    mtbr member
    Reputation:
    Join Date
    Aug 2007
    Posts
    483
    Pretty dang cool.
    What goes around..............

    Now let's see how many PM's you get about the fork.

  3. #3
    Stokeless Asshat
    Reputation: jeff's Avatar
    Join Date
    Jan 2004
    Posts
    3,021
    And that there, boys and girls, is how it's done.
    Zip ties? Not on my bike!

    Want:
    650B rims or wheel set. 80's vintage 32 or 36 x 135mm

  4. #4
    CBI 2L
    Reputation:
    Join Date
    Dec 2012
    Posts
    145
    Thanks.

    Started working on the wheels last night only to find that the Ringle rear hub I had set aside for this build has a pretty rough bearing, which can't be replaced. So I have to somehow repack it from inside the hub. Good times.

  5. #5
    mtbr member
    Reputation: CYCLEJCE's Avatar
    Join Date
    Nov 2010
    Posts
    642
    Very cool story and pics! Thank you for sharing!

  6. #6
    VRC Illuminati
    Reputation: Rumpfy's Avatar
    Join Date
    Dec 2003
    Posts
    16,877
    Only one thing left to do. Light it on fire and ghost jump it!

    -eric-

    http://www.rumpfy.com
    Wanted: NDS Suntour XC Pro Microdrive 175mm Crank Arm.

  7. #7
    mtbr member
    Reputation: Linoleum's Avatar
    Join Date
    Aug 2008
    Posts
    856
    That is awesome, well done!

  8. #8
    mtbr member
    Reputation:
    Join Date
    Apr 2010
    Posts
    25
    very cool indeed!

  9. #9
    CBI 2L
    Reputation:
    Join Date
    Dec 2012
    Posts
    145
    Thanks guys, it is pretty amazing to have the bike sitting here again. Wheels are done and I'll start the Tinker build conversion over the next few weeks.

  10. #10
    CBI 2L
    Reputation:
    Join Date
    Dec 2012
    Posts
    145
    Tinker replica build almost done pending some 3DV Graftons and a replica Ringle prototype 31.6 post I'm making.








Similar Threads

  1. 1993 Klein Attitude Candy Red
    By LARRYJO in forum Vintage, Retro, Classic
    Replies: 14
    Last Post: 08-24-2012, 09:47 AM
  2. HELP! Klein Adroit rear brake cable problem
    By norsk biker in forum Vintage, Retro, Classic
    Replies: 8
    Last Post: 05-19-2012, 11:31 AM
  3. 1993 Klein Attitude Cosmic
    By LARRYJO in forum Vintage, Retro, Classic
    Replies: 25
    Last Post: 02-26-2012, 01:41 PM
  4. 1993 Klein Rascal
    By pinguwin in forum Vintage, Retro, Classic
    Replies: 2
    Last Post: 09-10-2011, 03:33 PM
  5. Klein Adroit in Ebay
    By elrancho66 in forum Vintage, Retro, Classic
    Replies: 40
    Last Post: 01-27-2011, 07:21 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •