Results 1 to 2 of 2
  1. #1
    got the dhr...
    Reputation: luseboy's Avatar
    Join Date
    Sep 2007

    DT i need your help...

    I have an 08 dhr, and i for some reason, keep snapping the bolts in the rear end, the smaller ones in the upper parts of the suspension at the rear-side of the shock. My local hardware stores only had bolts that were fully threaded through, to replace it with. Im wondering if this would be a problem? Also, my rear end is loose, i checked all the bolts, my hub, my through axle, my derailer hanger, is it possible that i dont haveenough grease packed into the pivots? would this even affect the tightnessof the rear end? I'll be at sea otter, so if i cant figure it out, i plan on just bringing it by the turner booth and having you or someone there look at it. Also, i want to put decals on my bike, where can i get them?

    Thanks a bunch in advance,
    you make one hell of a bike,

  2. #2
    mtbr member
    Join Date
    Apr 2004


    If you need a bolt quick, get a 55mm and cut off the extra thread, that way you get the extra long shank.


Members who have read this thread: 0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts



VISIT US AT and the ConsumerReview Network are business units of Invenda Corporation

(C) Copyright 1996-2018. All Rights Reserved.