Results 1 to 4 of 4
  1. #1
    mtbr member
    Reputation:
    Join Date
    Apr 2004
    Posts
    6

    Session 77 Suspension

    I got a Session 77 last spring. It is one of the best bikes I have ever had. Climbs amazing for it's size and goes down like no other. Use it as my all mountian bike. The bearing on drive side (seat stay to chain stay) Is no longer pressure fit in. When i took apart the linkgae the bearing falls out. The bearing seems fine no play and rolls smooth. Any one else had this problem or any suggestions?

  2. #2
    mtbr member
    Reputation: FrankH's Avatar
    Join Date
    Mar 2006
    Posts
    25
    Looks like the same as my Liquid.

    You need some Loctite Bearing Retainer - I used #638. Clean the circumference of the bearing and the frame, scraping off any old residue and wipe down with some alcohol. Apply the Loctite, use a clamp to keep the bearing in place, and leave to set overnight before reassembling.

  3. #3
    mtbr member
    Reputation:
    Join Date
    Jan 2004
    Posts
    419

    use 680!

    Use 680 Loctite!

  4. #4
    mtbr member
    Reputation:
    Join Date
    Apr 2004
    Posts
    6
    It is curing as we speek. There was no good way to clamp it so I just put it back in the frame and set it back up so it could apply pressure.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •