Yes, the stringers are bent/shaped by burying an "I" shaped structure below ground, save the horizontal top piece (you can see it pretty well in the first 2 pics). I then lag the ends of the stringers down into the "I"...you might need some help with the initial bend if the wood you're using isn't particularly springy
So I've been working on some stunts and jumps on a friend's land, which requires a pretty long ride in to get to the start of the DH section. I'm trying to avoid hauling a bunch of lumber into the forest. Hoping to build some ladders and skinnies using only forest material. Does anyone have any tips on pulling this off? Pics and/or ideas would be great.
wood features in my neck of the woods just rot out so fast, so we try to use dirt as much as possible. though chainsawing a couple logs as shown in other post used to fill the jumps so you don't have to use as much dirt works well. as the wood rots everything kinda glues together...
Sunnyside Bike Park Working Group
Albion Hills MPAC
will build trail for rep... give a rep today...