I recently changed the fork on my Specialized FSR fork with a Tange headset. The bearings are cartridge type (think that's what they are since you can't see the BBs). Well, after putting in new fork and setting the headset pieces back in, I noticed there is a 1mm gap betweem the silver top cup and the black headset cover. I don't remember there being a gap there. Also, the headset lock ring doesn't sit flush with the cover. It sticks up 1mm, as you can see in the pic where it's between the cover and spacer (with scratch). Hope the pic will show you what I mean.
I double, triple checked to make sure I had all the parts in the right location made sure no part was upside down. Do I need to press the lack ring down? I'm afraid it may damage something.
Results 1 to 1 of 1