I've got a superstar plasma chainguide on my on-one 456 carbon with Truvativ stylo cranks, but i'm having massive problems with alignment.
Running the chainguide in place of the single drive side BB spacer as I should.
Filed the granny ring tabs off (were interfering with the chainguide)
(filed part of the BB adaptor off also- was interfering with the frame)
But with my chainring where the 2nd ring would be 9correct position for 1x9), the chainguide cage parts are too far outboard- causing massive amounts of rubbing.
I currently have the chainring in the position where the 3rd ring would normally be, and am using a bucket load of spacers to push the guides out far enough to match up with the third ring position.
The centre of the tabs the chainrings mount on align perfectly with the centre of the chainguide cage's annoyingly, but not either side.
Any idea's as of how to get this to work in the 2nd ring position?
Results 1 to 2 of 2
Check out the hottest mountain bike products from these brands!
See All Interbike Coverage - Click Here »