I wanted to know if or what type of Loctite to use on the spindle nut on unsealed bearing platform pedals.I got some Wellgo MG-4A platform pedals from danscomp.comthttp://www.danscomp.com/products-PARTS-PEDALSPLATFORM/465104/Wellgo_MG-4A_Magnesium_Pedals.html
I need to grease & set the bearings.
I'm not sure if the blue Loctite is strong enough to hold the nut in place.
Thanks in advance.
I also want to set the end hub nut on Shimano unsealed hub axles.
Results 1 to 1 of 1