Results 1 to 2 of 2
  1. #1
    mtbr member
    Join Date
    Jun 2004

    Racer-X 100 Upgrade Part II

    Per recommendations from my pervious post, I am having a new wheelset built using my Chris King hubs and new Stan Olympic rims. Should I go with Revolution or SuperComp spokes?

    Also, I can either do a new M970 XTR crankset or XO shifters and rear derailleur.

    I checked into the Syntace stem but because of injury I am pretty much forced to use a stem with 15 degrees of rise. Maybe I could try an X4 stem with 10 degrees of rise? I was hit by a car while riding my road bike. And I lost about 25% reach and mobility in my left arm...

  2. #2
    mtbr member
    Join Date
    Jan 2004
    I have the same hubs and rims. I used Revolutions on the front and on the non drive side of the rear. I used SuperComps and Brass Nipples on the drive side rear. They have been rock solid since march including 215 miles in racing.

    I love my X.0 triggers but the main advantage of them was offered in the X.9's this year so you could save some money and use X.9's. I also have a 970 XTR crankset and it's the cats ass. Get the crankset and X.9's IMO.
    Niner Jet 9 RDO XX1 Build
    2015 Niner Bikes Ambassador; Chattanooga, TN

Members who have read this thread: 0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts



VISIT US AT and the ConsumerReview Network are business units of Invenda Corporation

(C) Copyright 1996-2018. All Rights Reserved.