Page 3 of 4 FirstFirst 1234 LastLast
Results 101 to 150 of 162

Thread: Post your FTMs

  1. #101
    mtbr member
    Reputation: mw04snow's Avatar
    Join Date
    Nov 2006
    Posts
    176

    racebolts

    Quote Originally Posted by Mountain_Rocker
    would you know the part number of the bolts? i want them in red tried searching at the website you gave but i wasn't successful thanks!

    Gidday

    they are these

    M6 Aluminum Allen Head Bolt

    just choose what length that you want - I see they have a new category just for the bottle cage mounts . A word of warning is that the alloy is softer than steel so need to take care when tighteniong up - dont over torque them

    cheers from wet kiwiland

  2. #102
    mtbr member
    Reputation:
    Join Date
    Feb 2010
    Posts
    153

    My own FTM build....

    Just now noticed that thread, sorry for doubling my topic that was posted previously, just can't refrain...

    Here is my FTM, black anodized frame has been bought from Bob (along with few small bits), size is S.
    Spec: SLX crankset, TALAS 09, Fulcrum Red Zone rear wheel, Red Metal 3 front 15 mm thru-axle, Maxxis Advantage LUST 2.1 tyre front, Crossmark LUST 2.1 rear, Magura Marta 180mm front, Marta SL 180mm rear, drive: SLX front, SRAM x.9 rear medium cage, both SRAM X.0 twisters, Truvativ Stylo team handlebar, FSA OS190 steam, Crank Brothers Joplin J3 seatpost, Cane Creek S3 headset, flat magnesium pedals

    around 28.5 lbs total.

    not the lightest one, but that wasn't a goal and the convenience of adjustable seatpost more then worth it..
    built it myself...
    Attached Thumbnails Attached Thumbnails Post your FTMs-p1010436-web.jpg  


  3. #103
    mtbr member
    Reputation:
    Join Date
    Aug 2004
    Posts
    185
    Very nice bike. But your seatpost is on backwards.

  4. #104
    mtbr member
    Reputation:
    Join Date
    Jul 2010
    Posts
    26

    Smile


    Bike setup:
    * Frame Size & Color: Size S, Carbon Black&Red
    * Rear Shock: RP23 Boostvalve
    * Fork: Fox Talas FIT RLC 110-130-150 QR 15
    * Brakes: Hope Tech 2
    * Shifter: SRAM X0 Red
    * Cranks: Truavativ Noir
    * Rear Derailleur: SRAM X0
    * Pedals: Shimano DX
    * Stem: Thomson 4x 50
    * Handlebar: Ritchey WCS Carbon Low Riser
    * Seatpost: Thomson Elite
    * Saddle: FUNN
    * Cassette: SRAM PG990
    * Headset: Upper- Cane Creek IS-3i, Lower- Cane Creek IS 110 + reducer
    * Grips: ODI
    * Tire: Front - Conti Rubber Queen 2.4 UST, Rear - Conti Rubber Queen 2.2 UST
    * Rim: Crank Brother Cobalt
    * Hub: Crank Brother Cobalt



















    Last edited by sw625; 08-21-2010 at 08:15 PM.

  5. #105
    Bike Addiction
    Reputation: 00sable's Avatar
    Join Date
    Oct 2009
    Posts
    763
    OOOOOOOhhhhh Ahhhhhhhhh. That thing is beautiful! Felt my wallet tremble.
    Last edited by 00sable; 08-31-2010 at 07:38 AM.
    Disclaimer: Always get a second opinion cause I'm just guessing

  6. #106
    mtbr member
    Reputation:
    Join Date
    Feb 2010
    Posts
    153
    Quote Originally Posted by puckhead
    Very nice bike. But your seatpost is on backwards.

    Yeah, I know, that was the picture I made right after the assembly, was my first time dealing with that seatpost, wasn't sure how properly to put it..

    Fixed that the next day wen was directed here on the forums..

  7. #107
    At Work
    Reputation: sxr-racer's Avatar
    Join Date
    Nov 2005
    Posts
    1,654
    Quote Originally Posted by sw625

    Bike setup:
    * Frame Size & Color: Size S, Carbon Black&Red
    * Rear Shock: RP23 Boostvalve
    * Fork: Fox Talas FIT RLC 110-130-150 QR 15
    * Brakes: Hope Tech 2
    * Shifter: SRAM X0 Red
    * Cranks: Truavativ Noir
    * Rear Derailleur: SRAM X0
    * Pedals: Shimano DX
    * Stem: Thomson 4x 50
    * Handlebar: Ritchey WCS Carbon Low Riser
    * Seatpost: Thomson Elite
    * Saddle: FUNN
    * Cassette: SRAM PG990
    * Headset: Upper- Cane Creek IS-3i, Lower- Cane Creek IS 110 + reducer
    * Grips: ODI
    * Tire: Front - Conti Rubber Queen 2.4 UST, Rear - Conti Rubber Queen 2.2 UST
    * Rim: Crank Brother Cobalt
    * Hub: Crank Brother Cobalt



















    It is illegal to post something that nice here!!!!!!!!!!!!!!!!!!!!!!!!!!

    sweeeeeeet
    TREK EX9 27.5

    NINER MCR 9 (Moondust)

    2009 Gary Fisher Rig

    1997 Kona Ku

  8. #108
    searcher
    Reputation: kovi's Avatar
    Join Date
    Sep 2005
    Posts
    874
    Quote Originally Posted by sxr-racer
    It is illegal to post something that nice here!!!!!!!!!!!!!!!!!!!!!!!!!!

    sweeeeeeet
    +1.
    It looks so nice like it was a crime to make it dirty.
    Kovi

  9. #109
    mtbr member
    Reputation: Vespasianus's Avatar
    Join Date
    Apr 2008
    Posts
    4,488
    Quote Originally Posted by sw625

    Bike setup:
    * Frame Size & Color: Size S, Carbon Black&Red
    * Rear Shock: RP23 Boostvalve
    * Fork: Fox Talas FIT RLC 110-130-150 QR 15
    * Brakes: Hope Tech 2
    * Shifter: SRAM X0 Red
    * Cranks: Truavativ Noir
    * Rear Derailleur: SRAM X0
    * Pedals: Shimano DX
    * Stem: Thomson 4x 50
    * Handlebar: Ritchey WCS Carbon Low Riser
    * Seatpost: Thomson Elite
    * Saddle: FUNN
    * Cassette: SRAM PG990
    * Headset: Upper- Cane Creek IS-3i, Lower- Cane Creek IS 110 + reducer
    * Grips: ODI
    * Tire: Front - Conti Rubber Queen 2.4 UST, Rear - Conti Rubber Queen 2.2 UST
    * Rim: Crank Brother Cobalt
    * Hub: Crank Brother Cobalt




















    Dude that is sick. Also, can you post a close up of your cable routing next to the seat collar? The way you did that looks really nice and could solve a problem of the cable rubbing/scoring the FTM/ML linkage.

  10. #110
    mtbr member
    Reputation:
    Join Date
    Mar 2010
    Posts
    6
    2009 Titus FTM
    Fox TALAS 140
    Fox RP23
    SRAM X0 triggers
    SRAM X9 FD
    SRAM X0 RD
    SRAM PG990 (Tang)
    Shimano XT chain
    Race Face Next crankset
    Exustar E-PM25 pedals
    Avid Elixir CR brakes
    Ritchey WCS Low Rizer handlebar
    Thomson Elite X4 90mm stem
    Thomson Elite X4 seatpost
    Crank Brothers Iodine Directset
    Mortop Lock-On grips
    Ritchey WCS Marathon Saddle
    Salsa Flip-Lock
    Alligator Sleek Glide shifter cables
    Jagwire Tube Top 3G
    VDO Z3 cycle computer
    Fulcrum Red Metal 3 wheelset
    Specialized Sauserwind Control 26 x 2.0 tires
    Salsa Ti skewers
    Bontrager XXX Lite tubes
    27.0 lbs

    Pics of my ride immediately after the build:


















    This picture was taken on it's maiden ride one cold and wet Saturday morning.


    It isn't mountain biking if you don't get a little dirty...

  11. #111
    mtbr member
    Reputation:
    Join Date
    Jul 2010
    Posts
    26

    ... and if we just ...

    Quote Originally Posted by sxr-racer
    It is illegal to post something that nice here!!!!!!!!!!!!!!!!!!!!!!!!!!

    sweeeeeeet
    Thanks, sxr-racer

  12. #112
    mtbr member
    Reputation:
    Join Date
    Jul 2010
    Posts
    26
    Quote Originally Posted by kovi
    +1.
    It looks so nice like it was a crime to make it dirty.

    Thanks Kovi, will be on coming Sat.

  13. #113
    mtbr member
    Reputation:
    Join Date
    Jul 2010
    Posts
    26

    ... and if we just ...

    Quote Originally Posted by Vespasianus
    Dude that is sick. Also, can you post a close up of your cable routing next to the seat collar? The way you did that looks really nice and could solve a problem of the cable rubbing/scoring the FTM/ML linkage.
    I will take picture for cable routing and I rally like it but have some question when install Kindshock adjustable remote seatpost.

  14. #114
    mtbr member
    Reputation:
    Join Date
    Jul 2010
    Posts
    26

    ... and if we just ...

    Quote Originally Posted by 00sable
    OOOOOOOhhhhh Ahhhhhhhhh. That thing is beatiful! Felt my wallet tremble.
    Thanks 00sable.

  15. #115
    mtbr member
    Reputation:
    Join Date
    Jul 2010
    Posts
    26

    Time to get dirty ...




  16. #116
    Bike Addiction
    Reputation: 00sable's Avatar
    Join Date
    Oct 2009
    Posts
    763
    Almost a shame to get it dirty, Almost!
    Disclaimer: Always get a second opinion cause I'm just guessing

  17. #117
    Off the saddle
    Reputation: jizzim's Avatar
    Join Date
    Dec 2006
    Posts
    211
    Since this thread is linked to the setup/pics post I thought I'd ask this here so I didn't start a new post...

    Does anyone know the shock bolt sizes on the FTM (aluminum)?

    Shock-to-rocker (1 bolt)


    Shock-to-frame bracket (2 bolts)



    I'm not too concerned with any washers or any other bolts on the frame. Just the shock mounting bolts. I am thinking Ti. Extra few grams off won't make a difference but then it means I can increase it somewhere else.
    Last edited by jizzim; 09-04-2010 at 03:04 PM.

  18. #118
    searcher
    Reputation: kovi's Avatar
    Join Date
    Sep 2005
    Posts
    874
    Quote Originally Posted by jizzim
    I'm not too concerned with any washers or any other bolts on the frame. Just the shock mounting bolts. I am thinking Ti. Extra few grams off won't make a difference but then it means I can increase it somewhere else.
    You are a weightweenie ! That's official.

    I would ask Bob, am sure he knows.
    Kovi

  19. #119
    Off the saddle
    Reputation: jizzim's Avatar
    Join Date
    Dec 2006
    Posts
    211
    Lol, I'm not hardcore or anything..Just save weight when I can. I'll shoot Bob an email.

  20. #120
    searcher
    Reputation: kovi's Avatar
    Join Date
    Sep 2005
    Posts
    874
    Quote Originally Posted by jizzim
    Lol, I'm not hardcore or anything..Just save weight when I can. I'll shoot Bob an email.


    I can't wait for your rig to see the final weight.
    Kovi

  21. #121
    Hueston Woods Trail Crew
    Reputation: Bikerbob.com's Avatar
    Join Date
    Jan 2004
    Posts
    1,847

    lose weight

    I must defer to Limon, the resident Titus weight champion.

    Here's his X carbon anorexia thread
    http://forums.mtbr.com/showthread.ph...31542#poststop

  22. #122
    mtbr member
    Reputation: terrible's Avatar
    Join Date
    Jun 2007
    Posts
    1,899
    DO NOT RPLACE THOSE BOLTS WITH TI !!!

    I bent the stock steel bolt on the rocker multipule times. Ti will just shear off insted of bending.

    Also the front is a screw on one side and a pin on the other. It isn't two bolts on each side.
    "I'm the fastest of the slow guys"

  23. #123
    Off the saddle
    Reputation: jizzim's Avatar
    Join Date
    Dec 2006
    Posts
    211
    Quote Originally Posted by terrible
    DO NOT RPLACE THOSE BOLTS WITH TI !!!

    I bent the stock steel bolt on the rocker multipule times. Ti will just shear off insted of bending.

    Also the front is a screw on one side and a pin on the other. It isn't two bolts on each side.
    Sound advice. I had no clue you could bend those especially when they are steel.

  24. #124
    mtbr member
    Reputation:
    Join Date
    Apr 2009
    Posts
    2

  25. #125
    mtbr member
    Reputation: raindance's Avatar
    Join Date
    Jan 2009
    Posts
    40

    09 Titus FTM

    09 Titus FTM - size S weight- 25.5 lbs

  26. #126
    Bike Addiction
    Reputation: 00sable's Avatar
    Join Date
    Oct 2009
    Posts
    763
    Wow! Hope you got more pics of it clean. They don't look that good for long. Cable rubs,accidents and scratches have taken their toll on my RX. But damn it's been fun.Shes' a beauty. Enjoy.
    Disclaimer: Always get a second opinion cause I'm just guessing

  27. #127
    mtbr member
    Reputation: raindance's Avatar
    Join Date
    Jan 2009
    Posts
    40

    looks

    Quote Originally Posted by 00sable
    Wow! Hope you got more pics of it clean. They don't look that good for long. Cable rubs,accidents and scratches have taken their toll on my RX. But damn it's been fun.Shes' a beauty. Enjoy.
    It was covered in mud before this pic was taken, and come sunday ride, she'll be dirty again. It's a continuous cycle, ride..wash..ride..skip a wash..ride.. especially during the wet season here in Singapore but life goes on..e cable rub can be pretty notorious, worst than my previous motolite but well taken care with strategically placed cable rub stickers/cable wraps.

  28. #128
    I'm a "she".
    Reputation: mudworm's Avatar
    Join Date
    Feb 2007
    Posts
    934
    No water bottle cage mount inside the frame? I don't see any bolts.
    Inch by inch, I will get there...
    ride reports | tracks | photos
    Green Chiclets are my favorite candy.

  29. #129
    At Work
    Reputation: sxr-racer's Avatar
    Join Date
    Nov 2005
    Posts
    1,654
    Quote Originally Posted by raindance
    It was covered in mud before this pic was taken, and come sunday ride, she'll be dirty again. It's a continuous cycle, ride..wash..ride..skip a wash..ride.. especially during the wet season here in Singapore but life goes on..e cable rub can be pretty notorious, worst than my previous motolite but well taken care with strategically placed cable rub stickers/cable wraps.
    I use to do that to my 09 FTM. Now, it gets wiped down just every once in a while unless it been muddy........
    TREK EX9 27.5

    NINER MCR 9 (Moondust)

    2009 Gary Fisher Rig

    1997 Kona Ku

  30. #130
    mtbr member
    Reputation: Mr_Clean's Avatar
    Join Date
    Oct 2010
    Posts
    122

    FTM Carbon

    Howdy! Here's another FTM from Manila.

    My brother's rig:

    Titus FTM Carbon, Fox FIT TALAS, SRAM XX, Mavic Corssmax SLR, Crank Brothers 2Ti, etc. Great handling, all round bike. Very very sweet at 23lbs, fully loaded, with inner tubes and uncut seatpost.



    Cheers!

  31. #131
    mtbr member
    Reputation:
    Join Date
    Jan 2005
    Posts
    39
    Hi,

    Help request please. At present I own 2 mtb's, both HT, one Zaskar carbon and one Kona Explosif (steel). Problem is that the trails in my area are very rocky and I'm wondering of buying for a FS bike in the category of 140-150mm suspension. I don't want a fs xc bike in the range of 100-120mm with a quick geometry, I had an Anthem.
    There is a good deal for a FTM frame (2009) and I have some inquiries
    In this thread, I saw many take big account the weight of their bike. If I take that frame I'm in for a fork as well.
    Do you think that a 15mm axle is much stiffer than the standard QR? Can you tell the difference? Is it worth it to buy a new wheelset for a 15mm axle? I have (three years now) an american classic mtb 26 wheelset, from which I'm very satisfied. Really lightweight (1524gr) and still holds true after those years and many races. I think it can take the punishment of a trial bike.
    Have any one used a RS Revelation XX Dual Air 140 with that frame?
    The last question is, for a Large frame (5.5inch headtube) how long a steerer tube you should thing it would be enough?

    Thanks in advance
    Last edited by Achilles; 10-21-2010 at 07:20 PM.

  32. #132
    mtbr member
    Reputation:
    Join Date
    Aug 2010
    Posts
    39
    Quote Originally Posted by mw04snow
    Gidday

    they are these

    M6 Aluminum Allen Head Bolt

    just choose what length that you want - I see they have a new category just for the bottle cage mounts . A word of warning is that the alloy is softer than steel so need to take care when tighteniong up - dont over torque them

    cheers from wet kiwiland

    Are the stock linkage bolts aluminum? I'd be very concerned about replacing steel bolts with aluminum if they didn't come stock.

  33. #133
    mtbr member
    Reputation: Mr_Clean's Avatar
    Join Date
    Oct 2010
    Posts
    122
    Quote Originally Posted by Achilles
    Hi,

    Help request please. At present I own 2 mtb's, both HT, one Zaskar carbon and one Kona Explosif (steel). Problem is that the trails in my area are very rocky and I'm wondering of buying for a FS bike in the category of 140-150mm suspension. I don't want a fs xc bike in the range of 100-120mm with a quick geometry, I had an Anthem.
    There is a good deal for a FTM frame (2009) and I have some inquiries
    In this thread, I saw many take big account the weight of their bike. If I take that frame I'm in for a fork as well.
    Do you think that a 15mm axle is much stiffer than the standard QR? Can you tell the difference? Is it worth it to buy a new wheelset for a 15mm axle? I have (three years now) an american classic mtb 26 wheelset, from which I'm very satisfied. Really lightweight (1524gr) and still holds true after those years and many races. I think it can take the punishment of a trial bike.
    Have any one used a RS Revelation XX Dual Air 140 with that frame?
    The last question is, for a Large frame (5.5inch headtube) how long a steerer tube you should thing it would be enough?

    Thanks in advance
    You would definitely benefit from switching to 15QR. Can't you convert your current front hub? Those are great wheels, no bearing issues yet? Revelations are supposed to be good. There have been reports of issues with the U-turn version though. You may need at least 8-8.5" for your steerer tube.

  34. #134
    mtbr member
    Reputation:
    Join Date
    Jul 2010
    Posts
    26

    Farewell for Titus

    Farewell for Titus and have a good day with FTM.


  35. #135
    mtbr member
    Reputation:
    Join Date
    Aug 2004
    Posts
    87
    Prior to the stays breakin:
    Attached Thumbnails Attached Thumbnails Post your FTMs-pa09cbr6.jpg  

    Tequila tonight...for tomorrow we ride

  36. #136
    mtbr member
    Reputation: Et tu Tite?'s Avatar
    Join Date
    Nov 2010
    Posts
    18

    FTM porn...

    Getting all misty-eyed now on hearing of Titus' demise, so here's mine - this is old as she's about 18 months old now:

    - Frame: FTM Ti large
    - Fork: Rockshox Revelation U-turn 120-150mm
    - Brakes: Avid Elixir CR Carbon
    - Rear Der: SRAM XO Redwin Red
    - Cassette: SRAM PG990 Redwin Red
    - Front Der: Shimano XT
    - Chain: SRAM PC991
    - Crankset: Shimano XT
    - Pedals: Shimano XTR
    - Shifters: SRAM XO Redwin Red
    - Headset: Chris King NoThreadset Red Sotto Voce
    - Handlebar: Ritchey WCS Rizer wet white
    - Stem: Richey WCS 4-axis wet black
    - Seatpost: Richey WCS wet black
    - Saddle: Fizik Gobi XM Kium in porno white
    - Wheelset: Custom Dangerous Doug Paterson (DDP) DT Swiss 240s Hub 32 hole white, EX5.1 Disc Mountain Rim 32 hole
    - Tyres: Maxxis Monorail 2.1 rear, Conti Mountain King 2.4 front (both monorail in pic) with Stan's tubeless conversion - more reliable than the DT Swiss version
    Attached Thumbnails Attached Thumbnails Post your FTMs-ftm1.jpg  

    Post your FTMs-ftm2.jpg  

    Post your FTMs-ftm3.jpg  


  37. #137
    mtbr member
    Reputation: Vespasianus's Avatar
    Join Date
    Apr 2008
    Posts
    4,488
    Quote Originally Posted by Et tu Tite?
    Getting all misty-eyed now on hearing of Titus' demise, so here's mine - this is old as she's about 18 months old now:

    - Frame: FTM Ti large
    - Fork: Rockshox Revelation U-turn 120-150mm
    - Brakes: Avid Elixir CR Carbon
    - Rear Der: SRAM XO Redwin Red
    - Cassette: SRAM PG990 Redwin Red
    - Front Der: Shimano XT
    - Chain: SRAM PC991
    - Crankset: Shimano XT
    - Pedals: Shimano XTR
    - Shifters: SRAM XO Redwin Red
    - Headset: Chris King NoThreadset Red Sotto Voce
    - Handlebar: Ritchey WCS Rizer wet white
    - Stem: Richey WCS 4-axis wet black
    - Seatpost: Richey WCS wet black
    - Saddle: Fizik Gobi XM Kium in porno white
    - Wheelset: Custom Dangerous Doug Paterson (DDP) DT Swiss 240s Hub 32 hole white, EX5.1 Disc Mountain Rim 32 hole
    - Tyres: Maxxis Monorail 2.1 rear, Conti Mountain King 2.4 front (both monorail in pic) with Stan's tubeless conversion - more reliable than the DT Swiss version
    Man that is a sweet build.

  38. #138
    mtbr member
    Reputation:
    Join Date
    Jun 2009
    Posts
    160
    Et tu Tite , dun mind me asking..how tall are you ?

    wanna know how it fits u on the L frame..

  39. #139
    At Work
    Reputation: sxr-racer's Avatar
    Join Date
    Nov 2005
    Posts
    1,654
    Great looking FTM.

    But how is the FTM Ti much different than a motolite?? Just geometry changes?
    TREK EX9 27.5

    NINER MCR 9 (Moondust)

    2009 Gary Fisher Rig

    1997 Kona Ku

  40. #140
    mtbr member
    Reputation: Et tu Tite?'s Avatar
    Join Date
    Nov 2010
    Posts
    18
    Quote Originally Posted by magpies14
    Et tu Tite , dun mind me asking..how tall are you ?

    wanna know how it fits u on the L frame..
    I'm 6ft on the dot, but have a 35.2in inseam, which is quite long. I went through a huge amount of back and forth with Titus, the local importer and my LBS on what size frame to get - not a small investment, so getting it wrong was not an option.

    I previously had a custom Ti Racer X which had a 18.75in ST and a 23.9in (Effective) TT and was designed to be used with a setback post. The medium FTM has has a 19.25in ST and a 23.23 TT and the large 21.25in ST (!!) and 24.25 TT. I erred on the side of TT length rather than ST. Given the steep slope of the TT and the short tube joining the ST and the TT to form a triangle, I figured standover would not really be the main issue - it ended up being only 1in less than the Racer X. If I went for the medium I would have had to use a minium 120mm stem and would have to install a setback post and I wanted a max 100mm stem and a normal post. The large allowed for this, so hence the decision. Although I was concerned it would be like sitting on a farm gate, its been perfect for me.

  41. #141
    mtbr member
    Reputation: raindance's Avatar
    Join Date
    Jan 2009
    Posts
    40

    XTR brakes

    Quote Originally Posted by raindance
    09 Titus FTM - size S weight- 25.5 lbs
    new brakes..XTR Trail



  42. #142
    searcher
    Reputation: kovi's Avatar
    Join Date
    Sep 2005
    Posts
    874
    Quote Originally Posted by raindance
    new brakes..XTR Trail
    Nice. How you like them?
    Kovi

  43. #143
    mtbr member
    Reputation: raindance's Avatar
    Join Date
    Jan 2009
    Posts
    40

    xtr brakes

    The modulation is so so much better than the previous M970 version, more stopping power..lever reach adjustment n free stroke screw for fine tuning, which was found in XT M775 brakes. No mushy feeling like previous xtr, guess that's why i opted for the xt brakes before this upgrade.

    Yet to test how the brake pads will handle under higher temperatures.

  44. #144
    mtbr member
    Reputation:
    Join Date
    Jun 2010
    Posts
    324
    Thinking of building the FTM for my newbie partner, which is why I'm asking this question. What kind of riding do you guys do with your FTMs?

    How is the reliability of the stays? I've seen some broken stays and worry about that in the long run. I just want to build her a low maintenance bike. Thanks.

  45. #145
    searcher
    Reputation: kovi's Avatar
    Join Date
    Sep 2005
    Posts
    874
    Quote Originally Posted by sneakyt
    Thinking of building the FTM for my newbie partner, which is why I'm asking this question. What kind of riding do you guys do with your FTMs?

    How is the reliability of the stays? I've seen some broken stays and worry about that in the long run. I just want to build her a low maintenance bike. Thanks.
    The Ftm is great for allmountain riding and Xc as well, depending on the setup. Perfect for a newbie IMO.
    People had issues with the original 2009 seatstay and the problems occured mostly with heavy (200+) riders, as far as I know.
    They made a reinforced seatstay for the 09, depending on where you get your frame, you have a chance that you get yours with the replaced, stronger seatstay.
    The 2010 didn't have problems like this as far as I know.
    Great bike anyway, strongly recommended.
    Kovi

  46. #146
    At Work
    Reputation: sxr-racer's Avatar
    Join Date
    Nov 2005
    Posts
    1,654
    No issues with my 2009. Not sure which stays I have on mine, but at 200 lbs (More like 210) I have not had any issues.
    TREK EX9 27.5

    NINER MCR 9 (Moondust)

    2009 Gary Fisher Rig

    1997 Kona Ku

  47. #147
    mtbr member
    Reputation: raindance's Avatar
    Join Date
    Jan 2009
    Posts
    40
    Quote Originally Posted by raindance
    09 Titus FTM - size S weight- 25.5 lbs
    seatpost updated.

  48. #148
    mtbr member
    Reputation:
    Join Date
    Apr 2011
    Posts
    105
    Quote Originally Posted by sw625

    Bike setup:
    * Frame Size & Color: Size S, Carbon Black&Red
    * Rear Shock: RP23 Boostvalve
    * Fork: Fox Talas FIT RLC 110-130-150 QR 15
    * Brakes: Hope Tech 2
    * Shifter: SRAM X0 Red
    * Cranks: Truavativ Noir
    * Rear Derailleur: SRAM X0
    * Pedals: Shimano DX
    * Stem: Thomson 4x 50
    * Handlebar: Ritchey WCS Carbon Low Riser
    * Seatpost: Thomson Elite
    * Saddle: FUNN
    * Cassette: SRAM PG990
    * Headset: Upper- Cane Creek IS-3i, Lower- Cane Creek IS 110 + reducer
    * Grips: ODI
    * Tire: Front - Conti Rubber Queen 2.4 UST, Rear - Conti Rubber Queen 2.2 UST
    * Rim: Crank Brother Cobalt
    * Hub: Crank Brother Cobalt




















    Fantastic looking bike Have you had chance to find out the weight ? if so what does it weigh ?

  49. #149
    mtbr member
    Reputation: terrible's Avatar
    Join Date
    Jun 2007
    Posts
    1,899
    Here's the wifes new toy. This was bought to replace a 2008 stumpy fsr.

    2010 FTM meduim blue
    2009 Fox talas rlc 15mm qr
    2010 RS monarch rear shock
    CK hubs (pink standard front hub, qr rear hub)
    stans rims
    pink nips
    schwable NN tires 2.25
    hope x2 brakes (odd-balls with goodridge hoses)
    pink flower 160mm hope rotors
    pink xo rear d
    xt front d
    x9 shifters
    pink sram 990 cassette
    candy sl pedals
    carbon seatpost that came with my 09 ftm
    ti rail womens seat

    "I'm the fastest of the slow guys"

  50. #150
    mtbr member
    Reputation:
    Join Date
    Jul 2011
    Posts
    70
    My FTM in small size which I had bought from a riding buddy.

    140mm Fox Talas RLC FIT
    XT 9sp drivetrain
    Avid BB7 disc brakes
    Avid Cleansweep-X rotors with Ti bolts.
    WTB Shadow saddle(hollow Ti rails)
    DNM Dropper seatpost with remote
    Hope headset, stem, seatpost clamp and hubs.
    ZTR Flow Rim
    Schwalbe Nobby Nic 2.25 and Racing Ralph 2.1 tires - tubeless ready with Stan's sealant.










Page 3 of 4 FirstFirst 1234 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •