Mountain Bike Reviews Forum banner

Suspension setup for Enduro

693 views 3 replies 3 participants last post by  A's FaNaTiC 
#1 ·
Just curious to see what people are running here.

I have an 05 enduro expert, fox 36 and DHX air.

I run pressure at 240 in the rear, and 160 in the front, for my 210 lb ass.
 
#2 ·
search this forum for enduro setup you should find something - there was a lengthy thread on this along time ago. I've got an 06 expert i run about 200 in the rear, bottom out control all the way in, propedal dial either full + or full - depending on the ride. I think you've got way too much air in your forks. I run mine at about 65 or so. I think the recommended is about 72 for my weight (190ish with camelback etc.). It took me forever to get my shock setup the way that i like it. - so have a search for the earlier thread - lots of good comments on it.
 
#3 ·
yeah, that seems like ALOT in the front fork, I run 55lbs in mine, and i am 170. I am not sure, but i think i run around 165 in my rear shock, but will have to double check. I run my rebound 2 clicks off the fastest setting in the front, and in the rear its 2 clicks slower than the middle setting.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top