Page 3 of 45 FirstFirst 123456713 ... LastLast
Results 101 to 150 of 2210
  1. #101
    mtbr member
    Reputation:
    Join Date
    Mar 2012
    Posts
    92
    Quote Originally Posted by pabloquintana View Post
    Call Specialized directly. They sent me two for free!

    P

    Sweet! Will do, thanks!

  2. #102
    mtbr member
    Reputation: jlkvt's Avatar
    Join Date
    May 2010
    Posts
    152
    Quote Originally Posted by DDDonny View Post
    Sweet bike and congrats on your purchase! If you don't mind me asking, how much do the enduros tip the scales at? The guy posted above says his weighs in at 26.5 pounds, but I kind of assumed they'd be a bit heavier. Anyway, I've got some saving up to do...!
    Mine's a bit on the portly side at around 32# but to be fair the stans flows/king hubs aren't the lightest, the command post doesn't help, nor do the heavy pedals, HR II rear tire is heavy etc......

  3. #103
    mtbr member
    Reputation:
    Join Date
    May 2009
    Posts
    962
    Quote Originally Posted by Max Q View Post
    I purchased this used last week from a guy moving over to all 29". This is my first bike in 10+ years. All the aftermarket parts were added by the previous owner. I took it out for the first time today and rode for a good 5 hours. It was amazing.

    I know you said its been a long time since being on a bike, but do you have any impressions of those wheels you can offer? i've been eyeballing the chargers for almost a year now, but I keep putting other toys in front of it (snowboard, car parts, etc...)

  4. #104
    mtbr member
    Reputation:
    Join Date
    Apr 2012
    Posts
    31
    nice bikes people. I'll post mine after a few upgrades.

  5. #105
    mtbr member
    Reputation: innovator8's Avatar
    Join Date
    Sep 2011
    Posts
    346
    Quote Originally Posted by ry24000 View Post
    nice bikes people. I'll post mine after a few upgrades.
    Don't be afraid to show her naked...

    Sent from my HTC Glacier using Tapatalk

  6. #106
    mtbr member
    Reputation:
    Join Date
    Jan 2012
    Posts
    186
    What's the weight of the Comps stock wheels? The Traverse with the HiLos I mean. Been thinking of buying lighter rims to replace 'em and don't want to accidentally end up buying heavier ones.
    2011 Custom Transition TR250

  7. #107
    mtbr member
    Reputation:
    Join Date
    Apr 2012
    Posts
    30
    Quote Originally Posted by Pädi View Post
    What's the weight of the Comps stock wheels? The Traverse with the HiLos I mean. Been thinking of buying lighter rims to replace 'em and don't want to accidentally end up buying heavier ones.
    Are you asking me?

  8. #108
    mtbr member
    Reputation:
    Join Date
    Mar 2011
    Posts
    471
    http://1.bp.blogspot.com/-65vgrnME2X...0/IMG_0267.JPG

    Sorry for the link, but I'm having trouble uploading a pic directly to the thread.

    Anyway...
    '11 Enduro EVO
    Added the following:
    MRP mini G2 chainguide (1x10)
    RaceFace 34t Chainring
    Mavic Crossmax SX wheels
    Easton Havoc Bars (750mm)
    Easton Havoc Stem (50mm)
    Command Post Blacklight

    I've been injured the last couple of weeks and it'll be at least another week before I ride so I haven't been out on this rig yet. Dying to see how it rides now!

  9. #109
    mtbr member
    Reputation:
    Join Date
    Jan 2012
    Posts
    186
    Quote Originally Posted by Luca View Post
    Are you asking me?
    Well anyone really, doubt you know though 'cause you've got an SL right?

    Awesome bike Pike! Would've gone for an EVO myself if there would've been a Comp version of it, Expert cost too much and didn't really rely on the stock EVO:s xFusion suspension 'cause I'd never heard of it before.
    Anyway happy with my Comp, soon even happier but more about that next week
    2011 Custom Transition TR250

  10. #110
    mtbr member
    Reputation:
    Join Date
    Apr 2012
    Posts
    30
    Maybe a stupid question but what does "sl" stand for?

    Btw take a look at the newly installed bash guard and chain tensioner.

    Official Specialized Enduro Thread-imageuploadedbytapatalk1335938368.591261.jpg

  11. #111
    mtbr member
    Reputation:
    Join Date
    Jan 2012
    Posts
    186
    Probably superlight. Or so I'd believe :P
    2011 Custom Transition TR250

  12. #112
    mtbr member
    Reputation: watsgowinon's Avatar
    Join Date
    Oct 2005
    Posts
    49
    My old Enduro



    RS Revelation RLT Forks
    RS Monarch 3.3 shock
    Spinergy Xyclone wheels
    XTR Brakes, Cassette, FR der
    SRAM XO Shifters, R der
    Thompson Elite Stem, Seatpost
    Syncros bar
    ODI Grips
    Etc...

  13. #113
    mtbr member
    Reputation:
    Join Date
    Apr 2012
    Posts
    7
    I just bought this Enduro so far I am loving it..
    Attached Thumbnails Attached Thumbnails Official Specialized Enduro Thread-img_0363.jpg  

    Official Specialized Enduro Thread-img_0362.jpg  

    Official Specialized Enduro Thread-enduro.jpg  


  14. #114
    mtbr member
    Reputation:
    Join Date
    Jul 2009
    Posts
    888
    Old school
    New school

    Both looking great.
    08 Enduro: '12 Van RC2, Push DHX 5 coil, Flow EX, Hope m4, 750mm bar, Blacklite Post.

    Website
    http://all-mtn.com/

  15. #115
    mtbr member
    Reputation:
    Join Date
    Jul 2007
    Posts
    69
    These are some great looking bikes on here. I'll play 2012 Enduro dreambuild...





    27.2 lbs

  16. #116
    CAMBr Trail Crew
    Reputation: DDDonny's Avatar
    Join Date
    Sep 2005
    Posts
    506
    Quote Originally Posted by SantaCruzT100 View Post
    These are some great looking bikes on here. I'll play 2012 Enduro dreambuild...





    27.2 lbs

    Jealous??? Why, Yes! Yes I am..! Sweet bike!!!

  17. #117
    mtbr member
    Reputation:
    Join Date
    Apr 2012
    Posts
    7
    Nice mine weighs 28 lbs

  18. #118
    mtbr member
    Reputation:
    Join Date
    Jan 2012
    Posts
    186
    Sick S-works! Damn my XL frame looks **** compared to the M:s and L:s, can't get over the gap between the top tube and the lower tube when they meet at the head tube, still kinda regret not getting a large since both the L and the XL suited me well.
    Oh well, what do you guys think of getting a kashima coated RP23 instead of my current RP2? My dealer would have one removed from from an S-works frame. On the other hand I'd really like to test a coil shock on it, all that modifying to get one fit will be hard work though..
    2011 Custom Transition TR250

  19. #119
    mtbr member
    Reputation:
    Join Date
    Jul 2009
    Posts
    888
    Santacruzt100

    Amazing build, that is definitely my dream build.

    How do you like the Butchers on the front?
    08 Enduro: '12 Van RC2, Push DHX 5 coil, Flow EX, Hope m4, 750mm bar, Blacklite Post.

    Website
    http://all-mtn.com/

  20. #120
    mtbr member
    Reputation:
    Join Date
    Sep 2010
    Posts
    44
    Finally got some worthy pictures of mine not in the garage!
    Hit 130 miles on the odometer yesterday, finally starting to get a feel for it.
    Loving it!

    The Funduro

    2011 comp, pretty much stock
    xt chain
    blacklite
    converted to tubeless
    Switch between straightline defacto pedals and xt clipless depending on the trail.

    Brian
    Attached Thumbnails Attached Thumbnails Official Specialized Enduro Thread-img_7368.jpg  

    Official Specialized Enduro Thread-img_7348.jpg  


  21. #121
    mtbr member
    Reputation: jetta_mike's Avatar
    Join Date
    Feb 2007
    Posts
    484
    My 2011 Comp.

    Added a Command Post Blacklite and The RC2DH cart. to the Lyrik.


  22. #122
    THAT guy
    Reputation: TRY2KPUP's Avatar
    Join Date
    Aug 2010
    Posts
    139

    Close to being "done"....
    Bikes:
    2010 Spec Enduro comp.
    2013 Specialized Demo 8 (build)

  23. #123
    the Chain Guy
    Reputation: bismirle's Avatar
    Join Date
    Dec 2004
    Posts
    1,335
    Quote Originally Posted by TRY2KPUP View Post

    Close to being "done"....
    Nice looking bike. How do you like that rear shock? I am really starting to be disappointed with the RP2.

  24. #124
    THAT guy
    Reputation: TRY2KPUP's Avatar
    Join Date
    Aug 2010
    Posts
    139
    Quote Originally Posted by bismirle View Post
    Nice looking bike. How do you like that rear shock? I am really starting to be disappointed with the RP2.
    Blows the RP2 out of the water.
    Bikes:
    2010 Spec Enduro comp.
    2013 Specialized Demo 8 (build)

  25. #125
    catracho in aztecaland
    Reputation:
    Join Date
    Mar 2010
    Posts
    147
    Quote Originally Posted by TRY2KPUP View Post
    Blows the RP2 out of the water.
    Talking about shocks me and my buddy are puzzled with this test. which I am not sure it is worth a thing.

    I have a Specialized Enduro 2010 Expert with RP2 with Boostvalve. He has a Comp with RP2 plain.

    When lifting the rear tire 1 1/2 ft from the floor by grabbing the seat and letting it bounce, mine DOES NOT bounce. It is like a magnet sucks it into the earth. On the other side, his bounces!

    For you starting to make some theories, we both have sort of the same air pressure, which is around 230 psi, and both are L, and both have like 35 psi in the tires.

    Is it mine better because it will stay put instead bounce like a rabbit or maybe is not even worth 2 cents.
    What do you think?

    P

  26. #126
    THAT guy
    Reputation: TRY2KPUP's Avatar
    Join Date
    Aug 2010
    Posts
    139
    Haha. That's an odd question. Are the reboound settings the same? Anyways, I would say no bounce would be better because the rebound is doing its job.
    Bikes:
    2010 Spec Enduro comp.
    2013 Specialized Demo 8 (build)

  27. #127
    the Chain Guy
    Reputation: bismirle's Avatar
    Join Date
    Dec 2004
    Posts
    1,335
    My biggest problem is bottoming out. I am on the small size for rider weight, around 130 without gear. I am 5'11 and ride a large. With 170 in the rear I do seem to bottom out harshly. It isn't just on drops, even plowing through rocks. I do plan on doing some resort riding with the bike so an upgrade would be nice.

    Try2kpup, did you get your Monarch from Push?

  28. #128
    mtbr member
    Reputation:
    Join Date
    Apr 2010
    Posts
    49
    So I just picked up a 2010 Enduro Evo (frame) and I will be swapping over my Sektor RL 150mm for the time being. Trying to get a consensus on what 160mm fork to throw on this thing. I like coil sprung forks and was looking at the Fox 36 Van or a Marzoochi. Looking for some feed back on what might be the better selection. The rear shock is DHX RC2.

  29. #129
    Cut Casing Whisperer
    Reputation: Mr.P's Avatar
    Join Date
    Feb 2005
    Posts
    5,350
    Quote Originally Posted by bismirle View Post
    My biggest problem is bottoming out. I am on the small size for rider weight, around 130 without gear. I am 5'11 and ride a large. With 170 in the rear I do seem to bottom out harshly. It isn't just on drops, even plowing through rocks. I do plan on doing some resort riding with the bike so an upgrade would be nice.

    Try2kpup, did you get your Monarch from Push?
    For you and everyone considering a rear shock change from the RP2, I suggest getting the Fox volume spacers for the shock before going drastic with a full shock change.

    The volume smallest volume spacer filled in the soft midstroke and dialed the bottom out to more a of a coil-like couch feel. That and the RP2's is tuned to the Enduro (& rebound damping is quite good)... off the shelf aftermarket shocks are not tuned to the Enduro and will be hit & miss (been there, done that... multiple times, the shims are more important to the tune than the fiddly knobs)

    I now run more sag, bottom less and have a firmer midstroke.

    Regardless, $25 for a 15 minute change experiment - may as well lube that shock too.

    It's good for me, read here:
    Tuning a 2010 Enduro Shock - adding progression

    P

  30. #130
    THAT guy
    Reputation: TRY2KPUP's Avatar
    Join Date
    Aug 2010
    Posts
    139
    Quote Originally Posted by bismirle View Post
    My biggest problem is bottoming out. I am on the small size for rider weight, around 130 without gear. I am 5'11 and ride a large. With 170 in the rear I do seem to bottom out harshly. It isn't just on drops, even plowing through rocks. I do plan on doing some resort riding with the bike so an upgrade would be nice.

    Try2kpup, did you get your Monarch from Push?
    I could never get my rp2 to set up right, It was either too stiff and wouldnt use all of its travel, or was too soft, and would blow though it. That and it fades pretty quickly do to its lower oil volume, causing it to "pogo" on long decents...
    Yes, I got mine from PUSH. But I believe they have stepped down from selling custom shocks to get back into simply tuning. At least for now.

    Quote Originally Posted by Mr.P View Post
    For you and everyone considering a rear shock change from the RP2, I suggest getting the Fox volume spacers for the shock before going drastic with a full shock change.

    The volume smallest volume spacer filled in the soft midstroke and dialed the bottom out to more a of a coil-like couch feel. That and the RP2's is tuned to the Enduro (& rebound damping is quite good)... off the shelf aftermarket shocks are not tuned to the Enduro and will be hit & miss (been there, done that... multiple times, the shims are more important to the tune than the fiddly knobs)

    I now run more sag, bottom less and have a firmer midstroke.

    Regardless, $25 for a 15 minute change experiment - may as well lube that shock too.

    It's good for me, read here:
    Tuning a 2010 Enduro Shock - adding progression

    P
    This is a good first step, I agree. However, as mentioned above, the RP lags far behind in the damping area when compared to other offerings. And the RP on the enduros isnt really tuned for the bike, its just an off the shelf medium tune made for a wide range of riders. Nice thing about a PUSHed shock (monarch or otherwise) is that it IS tuned for the bike, rider, and riding style.
    Bikes:
    2010 Spec Enduro comp.
    2013 Specialized Demo 8 (build)

  31. #131
    mtbr member
    Reputation:
    Join Date
    Jan 2012
    Posts
    186
    Latest changes are cut steerer tube and a 1x10 conversion.
    So now it's otherwise stock except for:
    36t e13 guide ring
    Truvativ XO taco
    Straitline Vertical Wedge stem
    NS Bikes Aerial pedals

    Next upgrades will probably be a RF Atlas FR bar and a X0 gear lever.

    1st pic= During the ride
    3rd= At home after a wash.

    //Oh and sorry about the bad quality pics, took 'em with my phone.
    ///And yup, I should trim my cables, and I will when I've got time to.
    Attached Thumbnails Attached Thumbnails Official Specialized Enduro Thread-12052012300.jpg  

    Official Specialized Enduro Thread-12052012302.jpg  

    Official Specialized Enduro Thread-12052012311.jpg  

    2011 Custom Transition TR250

  32. #132
    Cut Casing Whisperer
    Reputation: Mr.P's Avatar
    Join Date
    Feb 2005
    Posts
    5,350
    Quote Originally Posted by TRY2KPUP View Post
    And the RP on the enduros isnt really tuned for the bike, its just an off the shelf medium tune made for a wide range of riders.
    Yes, but off the shelf shock tune of medium = ? from other shock makers, which is a crap shoot, while the Enduro RP is in the proper range.

    I haven't experienced fade. I usually get leg fade before I feel the shock fade

    Quote Originally Posted by TRY2KPUP View Post
    Nice thing about a PUSHed shock (monarch or otherwise) is that it IS tuned for the bike, rider, and riding style.
    I agree, the best route!

    P

  33. #133
    mtbr member
    Reputation:
    Join Date
    Jan 2008
    Posts
    42
    Shocking photo,

    But my Sworks 2012 Enduro...

    X0 everything
    Lyric forks
    You can see some flat spots on the xr500 rims, thinking of swapping them out for some ZTR flows, wtb or mabey even some chinese carbon jobs, opinions

    It has taken my 6 months to get it all dialed, but it is SWEEEET now!!
    Attached Thumbnails Attached Thumbnails Official Specialized Enduro Thread-2012-05-12-11.35.13.jpg  

    Last edited by ando_assi; 05-14-2012 at 12:00 AM.

  34. #134
    mtbr member
    Reputation:
    Join Date
    Sep 2008
    Posts
    5

    lost parts for my 2005 enduro pro need help

    some how 1 part was lost in transit between myself the bike store and the rebuild from fox on my rear air shock. I am not the most handy of all people when it comes to bike stuff but thought i could handle taking off the rear shock to send it away for new seals. anyway long story short all the bearing had seized up on my bike so i bought them and replaced them all. Well come to find out i lost a 3.5mm angeled washer that fits between the frame and the shock strut itself. I called specialized and they said like 80.00 for a complete new bearing kit and all. no exceptions. I cant afford this now as i have already dumped so much into getting her up and running. The part i am looking for should really be 2-3 dollars max. Anyone have an old enduro there parting out. please help.

    Thanks
    p.s. the upper bidwell Chico trails are calling and i need to answer.

  35. #135
    catracho in aztecaland
    Reputation:
    Join Date
    Mar 2010
    Posts
    147
    Quote Originally Posted by 41singletrack View Post
    I called specialized and they said like 80.00 for a complete new bearing kit and all. no exceptions.
    Sorry to hear that. What about a hardware store. These are not "Specialized" parts. I had luck ordering a screw and they've sent it for free!

    P

  36. #136
    mtbr member
    Reputation: sfgiantsfan's Avatar
    Join Date
    Dec 2010
    Posts
    1,186
    Here's mine, totally stock, I wanted to upgrade but nothing has broken or worn out yet, new tires this month for a Downieville/Tahoe trip in july
    Attached Thumbnails Attached Thumbnails Official Specialized Enduro Thread-endy.jpg  

    I'm sick of all the Irish stereotypes, as soon as I finish this beer I"m punching someone

  37. #137
    mtbr member
    Reputation:
    Join Date
    Jul 2007
    Posts
    69
    Quote Originally Posted by camarosam View Post
    Santacruzt100

    Amazing build, that is definitely my dream build.

    How do you like the Butchers on the front?
    Thanks! I love the butcher on the front, it rolls fast, is light and side knobs are great for cornering...

  38. #138
    mtbr member
    Reputation:
    Join Date
    Jul 2009
    Posts
    888
    SantaCruzT100 Good to here. I keep creating hypothetical tire setups for my bike to try and decide what setup I want to go with next.


    Great bikes everyone, and great additions to them.
    08 Enduro: '12 Van RC2, Push DHX 5 coil, Flow EX, Hope m4, 750mm bar, Blacklite Post.

    Website
    http://all-mtn.com/

  39. #139
    mtbr member
    Reputation:
    Join Date
    Sep 2011
    Posts
    149
    Hi everyone.
    Great bikes

    So here is mine...

    pretty much stock 2010 Enduro.
    Changes/upgrades:
    Henge Saddle
    Command Post seat post
    Protaper 710mm bar
    Ruffian lockon grips
    X9 2012 brakes
    Hope front floating rotor
    Rockgardz carbon frameguard

    Future upgrades (at least ones I intend to do...)
    Lyrik Mission Control DH compression and rebound dampers
    New wheels (probably Fulcrum Red Zones)
    Monarch shock

    cheers!
    Attached Thumbnails Attached Thumbnails Official Specialized Enduro Thread-dsc01152.jpg  

    Official Specialized Enduro Thread-dsc01153.jpg  

    Official Specialized Enduro Thread-dsc01154.jpg  

    Official Specialized Enduro Thread-dsc01155.jpg  


  40. #140
    mtbr member
    Reputation:
    Join Date
    Mar 2012
    Posts
    92
    another pic
    Attached Thumbnails Attached Thumbnails Official Specialized Enduro Thread-imag0115.jpg  


  41. #141
    mtbr member
    Reputation:
    Join Date
    Jul 2009
    Posts
    888
    Quote Originally Posted by leiito View Post
    another pic
    Nice, what style race did you compete in?
    08 Enduro: '12 Van RC2, Push DHX 5 coil, Flow EX, Hope m4, 750mm bar, Blacklite Post.

    Website
    http://all-mtn.com/

  42. #142
    mtbr member
    Reputation:
    Join Date
    Jan 2008
    Posts
    42
    Has anyone else had issues with the stock headset (noisy?) on the carbon Enduro?

  43. #143
    Your killing my Strava
    Reputation: vinnyl26's Avatar
    Join Date
    Apr 2007
    Posts
    621
    Quote Originally Posted by ando_assi View Post
    Has anyone else had issues with the stock headset (noisy?) on the carbon Enduro?
    No but I have a popping noise from the shock area while moving the shock up and down by hand on an enduro expert
    We will never know our full potential unless we push ourselves to find it.

  44. #144
    mtbr member
    Reputation:
    Join Date
    Mar 2012
    Posts
    92
    Quote Originally Posted by camarosam View Post
    Nice, what style race did you compete in?
    The number is an annual permit we need to ride on the mountain parks here in Mexico. I don't compete :/

    Quote Originally Posted by vinnyl26 View Post
    No but I have a popping noise from the shock area while moving the shock up and down by hand on an enduro expert
    I also have a weird popping/clicking/snapping sound that I can't quite diagnose. Only does it while riding though and seems to come from the front end.

  45. #145
    Your killing my Strava
    Reputation: vinnyl26's Avatar
    Join Date
    Apr 2007
    Posts
    621
    Quote Originally Posted by leiito View Post
    The number is an annual permit we need to ride on the mountain parks here in Mexico. I don't compete :/



    I also have a weird popping/clicking/snapping sound that I can't quite diagnose. Only does it while riding though and seems to come from the front end.
    Turns out the DU Bushing is bad on my Enduro....Damn Already?
    We will never know our full potential unless we push ourselves to find it.

  46. #146
    671
    671 is offline
    mtbr member
    Reputation:
    Join Date
    May 2012
    Posts
    22
    All done with my 2010 enduro.
    Attached Thumbnails Attached Thumbnails Official Specialized Enduro Thread-p4pb8098511.jpg  


  47. #147
    mtbr member
    Reputation:
    Join Date
    Sep 2011
    Posts
    149
    Quote Originally Posted by 671 View Post
    All done with my 2010 enduro.
    Very nice!

  48. #148
    671
    671 is offline
    mtbr member
    Reputation:
    Join Date
    May 2012
    Posts
    22
    Quote Originally Posted by tugamik View Post
    Very nice!
    Thanks,

  49. #149
    mtbr member
    Reputation:
    Join Date
    Jul 2009
    Posts
    888
    Quote Originally Posted by 671 View Post
    All done with my 2010 enduro.
    Looking good. Is that a 180 Talas?

    Did you have those Chunders laying around, or are they still in stock at Bike Shops?
    08 Enduro: '12 Van RC2, Push DHX 5 coil, Flow EX, Hope m4, 750mm bar, Blacklite Post.

    Website
    http://all-mtn.com/

  50. #150
    671
    671 is offline
    mtbr member
    Reputation:
    Join Date
    May 2012
    Posts
    22
    Quote Originally Posted by camarosam View Post
    Looking good. Is that a 180 Talas?

    Did you have those Chunders laying around, or are they still in stock at Bike Shops?
    It is a 180 talas and no they don't make the Chunder anymore.

Page 3 of 45 FirstFirst 123456713 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •