Results 1 to 3 of 3
  1. #1
    mtbr member
    Reputation:
    Join Date
    Mar 2007
    Posts
    11

    Enduro SL fork question

    When i set the attitude and lower the fork, ive noticed that if im off the bike and let it sit for extended amount of time (10-20mins) the fork slowly extends back to full length. If i then put weight back onto the fork it will lower like its supposed to.

    QUESTION: Is this supposed to happen?

    Thank you in advanced.

  2. #2
    mtbr member
    Reputation:
    Join Date
    Jan 2008
    Posts
    790
    There is a little bit of air in the travel adjust feature to allow the oil to flow between the high and low position in the travel adjust. Cycle the fork 10x from high to low to get the air in its appropriate chamber. This should allow the fork to stay in its locked position. If cycling the fork 10X does not work and the fork returns from its low position in a matter of seconds, you can have the cartridge exchanged.

  3. #3
    mtbr member
    Reputation:
    Join Date
    Mar 2007
    Posts
    11
    Thank you very much for the prompt response...I will try this and get to my LBS if your remedy doesnt work.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •