Results 1 to 3 of 3

Thread: enduro shock

  1. #1
    mtbr member
    Join Date
    Jul 2008

    Listen! enduro shock

    I have an 03 Enduro (Large Frame) with a fox float R rear shock which is now blown. The eye to eye on that shock is 7.625 but the eye to eye on most of the new fox shocks is either 7.5 or 7.875, or at least thats the closest measurement they offer right now (im looking to get an RP23). Will getting the 7.875 eye to eye mess up the geometry of the bike or is it close enough where it shouldnt matter??

  2. #2
    mtbr member
    Reputation: Rock's Avatar
    Join Date
    Jan 2004

    Close enough...

    I had an '03 Enduro Comp. The Fox w/Itch Switch stopped working. It was fixed under warranty, but while it was being sent off I purchased the Float w/ the 7.875" length. I found no problems with a VERY slight geometry change.

    You could also run alittle more sag to compensate if you felt it was nessesary.


  3. #3
    mtbr member
    Reputation: socalenduro's Avatar
    Join Date
    Nov 2006
    you can keep an eye out on ebay for odd ball shock lengths.
    another option is sending it to Push to have them rebuild it. It would most likely perform as good if not better than a new shock for the same price or less

Members who have read this thread: 0

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts



VISIT US AT and the ConsumerReview Network are business units of Invenda Corporation

(C) Copyright 1996-2018. All Rights Reserved.