Results 1 to 4 of 4
  1. #1
    mtbr member
    Reputation: noosa2's Avatar
    Join Date
    May 2004
    Posts
    1,317

    Hollowtech II and 2006 Monocog flight

    Looks like I will to getting a set of used shimano XT hollowtech II cranks and bottom bracket to put on my 2006 monocog flight frame. The cranks/BB have 3 spacers and I am wondering how many of those I need to use and which side they need to go on.

    Thanks for the help.

  2. #2
    mtbr member
    Reputation: plume's Avatar
    Join Date
    May 2006
    Posts
    1,506
    if you have a 68 mm BB shell you'll put two spacers on the drive side, one on the non. if you have a 73mm shell it's one on each side.

    My one says BRAP!

  3. #3
    mtbr member
    Reputation: noosa2's Avatar
    Join Date
    May 2004
    Posts
    1,317
    Quote Originally Posted by plume
    if you have a 68 mm BB shell you'll put two spacers on the drive side, one on the non. if you have a 73mm shell it's one on each side.

    Thanks.

  4. #4
    mtbr member
    Reputation: kosayno's Avatar
    Join Date
    Sep 2006
    Posts
    956
    Quote Originally Posted by plume
    if you have a 68 mm BB shell you'll put two spacers on the drive side, one on the non. if you have a 73mm shell it's one on each side.

    correct on the 68mm, but with 73mm you only need one on drive side and none on non-drive side.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •